Refine By
Prestige Paints
$32.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Modern Masters
$34.95
at Amazon

Modern Masters Front Door Paints have 24 colors that were carefully selected, utilizing the Emotional Color Wheel and the latest i...n color trends and home design from around the world. The never-fade technology ensures that your door will be as vibrant as the first day it was painted. The two-coat application and quick-dry formula allows you to paint and close your door the same day. read more

Modern Masters
$34.95
at Amazon

Modern Masters Front Door Paints have 24 colors that were carefully selected, utilizing the Emotional Color Wheel and the latest i...n color trends and home design from around the world. The never-fade technology ensures that your door will be as vibrant as the first day it was painted. The two-coat application and quick-dry formula allows you to paint and close your door the same day. read more

Prestige Paints
$37.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Diamond Brite Paint
$10.99
at Amazon

High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely... used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and very contemporary settings. Rather than choosing a high gloss paint for a whole room, use it sparingly in select locations, such as doors and trim. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with high gloss paints. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

Diamond Brite Paint
$10.99
at Amazon

High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely... used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and very contemporary settings. Rather than choosing a high gloss paint for a whole room, use it sparingly in select locations, such as doors and trim. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with high gloss paints. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

Prestige Paints
$42.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$38.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Prestige Paints
$42.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Diamond Brite Paint
$10.99
at Amazon

Diamond-Brite Varnish Stain is an easy way to change the color of your currently stained or polyurethane finished wood. There's no... stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of Diamond-Brite Varnish Stain. Why change the color? There could be various reasons. You may want to match a particular furniture item to your décor, update a tired room, or re-style an older piece. Diamond-Brite Varnish Stain is offered in 6 pre-mixed colors. It is important too understand, that if the user chooses not to strip the current finish completely before applying Diamond-Brite Varnish Stain, the color will vary depending upon what color it is going over. The wood graining in the wood will show through when completed. 4-6 Hr Dry Time; 24 Hr Recoat Time 400 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing. read more

True Value
$148.99
at Amazon

True Value Mfg. Company SHPN-5G Premium Weather all Natural Base For 100% Acrylic Satin House & Trim paint is a high hiding formul...a for great coverage. Tough mildew, stain and fade resistant protection. Easy soap and water cleanup. 25 year warranty. read more

Diamond Brite Paint
$32.99
at Amazon

High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely... used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and very contemporary settings. Rather than choosing a high gloss paint for a whole room, use it sparingly in select locations, such as doors and trim. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with high gloss paints. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

Prestige Paints
$37.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$37.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Prestige Paints
$33.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Prestige Paints
$40.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Prestige Paints
$32.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Prestige Paints
$40.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Prestige Paints
$42.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Diamond Brite Paint
$37.99
at Amazon

Diamond-Brite Varnish Stain is an easy way to change the color of your currently stained or polyurethane finished wood. There's no... stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of Diamond-Brite Varnish Stain. Why change the color? There could be various reasons. You may want to match a particular furniture item to your décor, update a tired room, or re-style an older piece. Diamond-Brite Varnish Stain is offered in 6 pre-mixed colors. It is important too understand, that if the user chooses not to strip the current finish completely before applying Diamond-Brite Varnish Stain, the color will vary depending upon what color it is going over. The wood graining in the wood will show through when completed. 4-6 Hr Dry Time; 24 Hr Recoat Time 400 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing. read more

Prestige Paints
$42.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Diamond Brite Paint
$37.99
at Amazon

Diamond-Brite Varnish Stain is an easy way to change the color of your currently stained or polyurethane finished wood. There's no... stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of Diamond-Brite Varnish Stain. Why change the color? There could be various reasons. You may want to match a particular furniture item to your décor, update a tired room, or re-style an older piece. Diamond-Brite Varnish Stain is offered in 6 pre-mixed colors. It is important too understand, that if the user chooses not to strip the current finish completely before applying Diamond-Brite Varnish Stain, the color will vary depending upon what color it is going over. The wood graining in the wood will show through when completed. 4-6 Hr Dry Time; 24 Hr Recoat Time 400 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing. read more

Prestige Paints
$40.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$32.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$33.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Rust-Oleum
$15.17
at Amazon

Rust-Oleum Specialty Clear Chalkboard Paint creates a chalkboard surface of any shape and size without changing the color of the s...urface. It converts any hard surface into a usable chalkboard great for indoor areas like kitchens, playrooms, offices and many other objects. read more

Paper House Production
$39.98
at Amazon

Sticky pix wall applique stickers made easy to create fantastic wall art. Transform walls, doors, glass or any other smooth interi...or surface into an artistic masterpiece. Simply peel the backing away from the image and place in the desired location. The best part is that the stickers are 100 percent removable, repositionable and won't harm walls. Available in a butterfly theme. Includes 2 stickers per pack. Measures 10-1/2-inch length by 5-inch width. read more

Rust-Oleum
$17.90
at Amazon

A high-performance modified alkyd base coating for use above the waterline. Provides excellent gloss retention, UV resistance, fle...xibility and durability in extreme weather conditions. Coverage will vary with condition of surface and method of application. Quart size. No. 206999: Color: White, Size: Quart, Sheen: Gloss, Formulation: Modified Alkyd Base, Surfaces: Fiberglass, Wood, Metal(Above Waterline), Pkg Qty: 1, Package Type: Can No. 207000: Color: White, Size: Quart, Sheen: Semi-Gloss, Formulation: Modified Alkyd Base, Surfaces: Fiberglass, Wood, Metal(Above Waterline), Pkg Qty: 1, Package Type: Can No. 207001: Color: Oyster White, Size: Quart, Sheen: Gloss, Formulation: Modified Alkyd Base, Surfaces: Fiberglass, Wood, Metal(Above Waterline), Pkg Qty: 1, Package Type: Can No. 207002: Color: Navy Blue, Size: Quart, Sheen: Gloss, Formulation: Modified Alkyd Base, Surfaces: Fiberglass, Wood, Metal(Above Waterline), Pkg Qty: 1, Package Type: Can No. 207004: Color: Brilliant Red, Size: Quart, Sheen: Gloss, Formulation: Modified Alkyd Base, Surfaces: Fiberglass, Wood, Metal(Above Waterline), Pkg Qty: 1, Package Type: Can No. 207005: Color: Battle Gray, Size: Quart, Sheen: Gloss, Formulation: Modified Alkyd Base, Surfaces: Fiberglass, Wood, Metal(Above Waterline), Pkg Qty: 1, Package Type: Can read more

Modern Masters
$32.95
at Amazon

Modern Masters Matte Metallic Paints are unique, non-tarnishing colors with real metal particles, pearlescent pigments and traditi...onal color pigments. read more

Modern Masters
$32.95
at Amazon

Modern Masters Matte Metallic Paints are unique, non-tarnishing colors with real metal particles, pearlescent pigments and traditi...onal color pigments. read more

Wheatpaste Art Collective
$154.30
at Amazon

There is an electric current in this room. Bright idea anyone? Canvas wall art is reproduced in our San Diego studios using the be...st digital reproduction method currently available, resulting in great clarity and color saturation. After printing the canvas is stretched by hand over a custom built wood frame. No additional framing is required as the canvas wraps around the sides providing a finished decorative side. A saw tooth hanger is attached for easy hanging and artist biography information is included on the back to learn more about today's working artists. Canvases are exceptionally durable and can be cleaned with a soft, dry or slightly damp cloth. read more

Prestige Paints
$32.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Prestige Paints
$42.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

True Value
$22.57
at Amazon

True Value Mfg. Company EZFN-GL Easy-care Paint Primer Gallon Flat Neutral Base is a paint and primer in one. Low odor formula. Mo...ld and mildew resistant coating. Scrub able, easy to clean. One coat coverage. Dries quickly to a durable finish. High performance interior paint. read more

Paint Scentsations
$3.49
at Amazon

Paint Sensations is a scent additive for paint. Walls and ceilings are the largest surface area in your home and "now they can sme...ll as good as they look.". read more

DECOLAV
$367.00 $256.90
at Efaucets.com

DecoLav 1019T-PPK Painted Pink Translucence Round Tempered Glass Vessel. Bathroom Sinks > Vessel Single Bowl. 19mm tempered glass,... Designed for above-counter use, Without overflow, Easy to clean, Simple to install, Available in a variety of shapes and... read more

Modern Masters
$53.50
at Amazon

Modern Masters Matte Metallic Paints are unique, non-tarnishing colors with real metal particles, pearlescent pigments and traditi...onal color pigments. read more

Masterchem Industries
$67.94
at Amazon

MasterChem Industries 46240 46240 Smooth Black Gallon Paint Gallon is designed to provide long-lasting metal protection. Provides ...a decorative finish that resists corrosion and the damaging effects from moisture and severe weather. Dry time to touch 90 minutes, recoats should be applied within 4 hours. Covers about 200 sq. ft. per gallon. read more

Prestige Paints
$39.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Wall Pops!
$21.99 $19.79
at Target

Find Wall And Ceiling Coverings at Target.com! With happy florals and swirling butterflies, this darling birdhouse scene inspires ...a wonderful garden landscape on walls. Pretty pastel birds in fashionably patterned designs, chirp a delightful melody as they swoop and dive across a room. These charming peel and stick decals come on three 11.8" x 8" sheets and contain 35 pieces. Color: Purple/Blue. Gender: Unisex. read more

Flood
$26.65
at Amazon

Folderol Latex Paint Additive improves the performance of latex paint and keeps projects flowing smoothly. It gives latex paint th...e feel of oil paint, without the cleanup hassles. read more

Prestige Paints
$42.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Diamond Brite Paint
$24.75
at Amazon

FLAT LATEX INTERIOR WALL PAINT Flat enamel is a paint with a durable flat, matte finish. It's a good choice for powder rooms and h...alls, as it holds up to occasional cleaning. Where to Use Interior: Walls, ceilings, woodwork; bedrooms, family rooms, dining rooms, kids rooms and offices. Surfaces: Wood, drywall, aluminum, masonry, brick, stucco and vinyl. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. 300-350 Sq. Ft of coverage per gallon. read more

DECOLAV
$297.00 $207.90
at Efaucets.com

DecoLav 1019T-PMS Painted Metallic Silver Translucence Round Tempered Glass Vessel. Bathroom Sinks > Vessel Single Bowl. 19mm temp...ered glass, Designed for above-counter use, Without overflow, Easy to clean, Simple to install, Available in a variety of... read more

True Value
$132.12
at Amazon

True Value Mfg. Company HPXN-5G Weather all Neutral Base For Acrylic Latex Flat House Paint 5 Gallon is a high hiding formula for ...great coverage. Tough mildew, stain and fade resistant protection. Easy soap and water cleanup. Lifetime warranty. read more

DECOLAV
$297.00 $207.90
at Efaucets.com

DecoLav 1019T-PCO Painted Copper Translucence Round Tempered Glass Vessel. Bathroom Sinks > Vessel Single Bowl. 19mm tempered glas...s, Designed for above-counter use, Without overflow, Easy to clean, Simple to install, Available in a variety of shapes... read more

This item has been added to your list

This item has been added to your sale alerts