Refine By
van sickle paint mfg
$55.51
at Amazon

Gallon, Allis Chalmers Orange, Enamel Paint, For Tractors, Farm Equipment, Machinery, Tools, Vehicles & Other Industrial Applicati...ons. read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Diamond Brite Paint
$10.99
at Amazon

High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely... used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and very contemporary settings. Rather than choosing a high gloss paint for a whole room, use it sparingly in select locations, such as doors and trim. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with high gloss paints. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

Valspar
$159.99 $152.34
at Essential Hardware

This premium quality latex house paint provides a beautiful flat finish in 1 coatIt is available in white and a wide range of cont...emporary colors1 coat coverageIt is mildew and weather-resistantNonyellowing read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Prestige Paints
$39.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Diamond Brite Paint
$10.99
at Amazon

Diamond-Brite Varnish Stain is an easy way to change the color of your currently stained or polyurethane finished wood. There's no... stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of Diamond-Brite Varnish Stain. Why change the color? There could be various reasons. You may want to match a particular furniture item to your décor, update a tired room, or re-style an older piece. Diamond-Brite Varnish Stain is offered in 6 pre-mixed colors. It is important too understand, that if the user chooses not to strip the current finish completely before applying Diamond-Brite Varnish Stain, the color will vary depending upon what color it is going over. The wood graining in the wood will show through when completed. 4-6 Hr Dry Time; 24 Hr Recoat Time 400 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing. read more

Diamond Brite Paint
$89.13
at Amazon

Semi-gloss paint is most often used on doors, trim, and cabinets in kitchens or bathrooms. It is easily cleaned and lays down a ni...ce, subtle shine, without being too glitzy. Take care with pre-paint preparation work, as poorly prepared surfaces can be a bit distracting when highlighted by a semi-gloss surface. Clean ability and Durability: A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. Use soap and water. Do not dispose of this product down a drain. For disposal of empty containers and unused product, contact your household refuse collection service.Where to Use Interior: Walls, ceilings, woodwork; bedrooms, family rooms, dining rooms, kids rooms and offices. Surfaces: Wood, drywall, aluminum, masonry, brick, stucco and vinyl. 300-350 Sq. Ft of coverage per gallon.For best results, priming the surface first can reduce the need for a second coat. The manufacturer recommended primer for this paint is Diamond Brite 40100 Interior/Exterior Latex PVA Primer Sealer. read more

Brewster
$54.64
at Amazon

This wallpaper is printed on Vinyl Coated This wallpaper is Prepasted 20.5-Inch wide by 396-Inch long Random match and 0-Inch repe...at This wallpaper is Washable and Strippable, Manufacturer: Brewster read more

Prestige Paints
$33.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Design House
$19.26
at Amazon

The Ball Entry Door Knob is classic enough for traditional décor and sleek enough for modern settings. It features a 5-pin high se...curity cylinder. Universal (6-way) latch. read more

Prestige Paints
$32.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Prestige Paints
$33.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. Satin finish paints are probably the most commonly used finish on exterior surfaces. Satin finishes resist mildew effectively and are easier to clean than flat or eggshell finishes, and can be wiped down or scrubbed lightly. On exterior surfaces, satins are ideal for painting siding that is in good to excellent condition. Outside surfaces painted with satin paint also shed water effectively and don't fade quickly from the sun. They are also a good choice for painting trim and shutters. read more

Diamond Brite Paint
$10.99
at Amazon

High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely... used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and very contemporary settings. Rather than choosing a high gloss paint for a whole room, use it sparingly in select locations, such as doors and trim. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with high gloss paints. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

True Value
$12.22
at Amazon

True Value Mfg. Company EZN-QT Easy-care Paint Primer Quart Latex Eggshell Neutral Enamel is a paint and primer in one. Low odor f...ormula. Mold and mildew resistant coating. Scrub able, easy to clean. One coat coverage. Dries quickly to a durable finish. High performance interior paint. read more

Diamond Brite Paint
$25.99
at Amazon

LATEX BRIGHT & RICH SEMI-GLOSS PAINT Semi-gloss paint is most often used on doors, trim, and cabinets in kitchens and bathrooms. I...t is easily cleaned and lays down a nice, subtle shine, without being too glitzy. Take care with pre-paint preparation work, as poorly prepared surfaces can be a bit distracting when highlighted by a semi-gloss surface. Brite & Rich colors are considered to be deep tone colors, and are made from a "D? base formula. It is important to note, that deep base colors "do not hide? as well as pastels. Depending upon what color is being painted over, additional coats of paint may be required. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

Paint Scentsations
$30.80
at Amazon

Paint SCENTsations is a scent additive for paint. It allows you to add a refreshing fragrance to any painting project. Walls and c...eilings are the largest surface area in your home and now they can smell as good as they look. Simply pour 1 ounce per 1 gallon of paint. Shake or stir thoroughly, then apply as directed by manufacturer. Paint Scentsations produces a pleasant subtle scent that lasts for approximately 3 months depending on environmental conditions. For best results use Paint Scentsations in primer and top coat. Paint Scentsations can be used in any latex or oil-based paints and will not affect the paint's color, sheen, durability or application. read more

Diamond Brite Paint
$12.99
at Amazon

Diamond-Brite Aluminum paint is a excellent product to cover almost any surface that the decorator is seeking a brite aluminum fin...ish. This is a great product to recoat chainlink fencing, radiator heaters, machinery, etc. This paint can be used indoors or outdoors. Durable, long lasting enamel Corrosion resistance Excellent gloss and color retention Superior coverage and hiding Protects against the elements Ideal for heavy-duty and commercial environments 6-8 Hr Dry Time; 24 Hr Recoat Time 300 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing. read more

Prestige Paints
$28.97
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Paint Scentsations
$3.49
at Amazon

Paint Sensations is a scent additive for paint. Walls and ceilings are the largest surface area in your home and "now they can sme...ll as good as they look.". read more

Prestige Paints
$32.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Prestige Paints
$32.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Laurey
$2.56
at Amazon

1-1/2" round porcelain knob with design. Includes 1-1/4" zinc screw. Bag contains 1 knob and 1 screw. No. 08700: Finish: White & H...and Painted Design, Material: Porcelain, Type: Round knob, Projection: 3/4", Diameter: 1-1/2", Screw Size: #8-32 x 1-1/4", Pkg Qty: 1, Package Type: Bag No. 08802: Finish: Red Tattersal, Material: Porcelain, Type: Round knob, Projection: 3/4", Diameter: 1-1/2", Screw Size: #8-32 x 1-1/4", Pkg Qty: 1, Package Type: Bag No. 08804: Finish: Seafoam Tattersal, Material: Porcelain, Type: Round knob, Projection: 3/4", Diameter: 1-1/2", Screw Size: #8-32 x 1-1/4", Pkg Qty: 1, Package Type: Bag read more

CWI Gifts
$18.98
at Amazon

CWI Gifts 1.5" School House Glass Knob 2Pk. The School House Glass Knob has a 1-1/2 inch diameter. There are 2 knobs in this set.

Brewster
$53.79
at Amazon

A fine silver sheen dresses your walls in a mod Moroccan vibe. This geometric ironwork wallpaper is sophisticated and striking

Prestige Paints
$37.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Diamond Brite Paint
$76.99
at Amazon

Semi-gloss paint is most often used on doors, trim, and cabinets in kitchens or bathrooms. It is easily cleaned and lays down a ni...ce, subtle shine, without being too glitzy. Take care with pre-paint preparation work, as poorly prepared surfaces can be a bit distracting when highlighted by a semi-gloss surface. Clean ability and Durability: A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. Use soap and water. Do not dispose of this product down a drain. For disposal of empty containers and unused product, contact your household refuse collection service.Where to Use Interior: Walls, ceilings, woodwork; bedrooms, family rooms, dining rooms, kids rooms and offices. Surfaces: Wood, drywall, aluminum, masonry, brick, stucco and vinyl. 300-350 Sq. Ft of coverage per gallon.For best results, priming the surface first can reduce the need for a second coat. The manufacturer recommended primer for this paint is Diamond Brite 40100 Interior/Exterior Latex PVA Primer Sealer. read more

Beacon House
$45.47
at Amazon

Enhance decor in a fresh global vibe with this beautiful diamond wall paper. A warm sand hue mixed with beige and ivory tones is a... welcoming addition to any room. read more

Prestige Paints
$37.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

True Value
$14.86
at Amazon

True Value Mfg. Company VF8-GL Painter's Select Basics Off White Wall Paint 1 Gallon dries quickly to a flat finish. For interior ...use. Washable. read more

Diamond Brite Paint
$15.99
at Amazon

Flat enamel is a paint with a durable flat, matte finish. It's a good choice for powder rooms and halls, as it holds up to occasio...nal cleaning. Where to Use Interior: Walls, ceilings, woodwork; bedrooms, family rooms, dining rooms, kids rooms and offices. read more

Diamond Brite Paint
$10.99
at Amazon

High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely... used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and very contemporary settings. Rather than choosing a high gloss paint for a whole room, use it sparingly in select locations, such as doors and trim. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with high gloss paints. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. For disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

Diamond Brite Paint
$25.99
at Amazon

Semi-gloss paint is most often used on doors, trim, and cabinets in kitchens and bathrooms. It is easily cleaned and lays down a n...ice, subtle shine, without being too glitzy. Brite & Rich colors are considered to be deep tone colors, and are made from a "D? base formula. Clean Up & Disposal: Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect it from freezing. Take care with pre-paint preparation work, as poorly prepared surfaces can be a bit distracting when highlighted by a semi-gloss surface. It is important to note, that deep base colors "do not hide? as well as pastels. Depending upon what color is being painted over, additional coats of paint may be required. For best results, priming the surface first can reduce the need for a second coat. The manufacturer recommended primer for this paint is Diamond Brite 40100 Interior/Exterior Latex PVA Primer Sealer. read more

Diamond Brite Paint
$23.12
at Amazon

Flat enamel is a paint with a durable flat, matte finish. It's a good choice for powder rooms and halls, as it holds up to occasio...nal cleaning. Where to Use Interior: Walls, ceilings, woodwork; bedrooms, family rooms, dining rooms, kids rooms and offices. Surfaces: Wood, drywall, aluminum, masonry, brick, stucco and vinyl. A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. Use soap and water for cleaning the painted surface. Do not dispose of this product down a drain. Instead, contact your household refuse collection service. Protect it from freezing. 300-350 Sq. Ft of coverage per gallon. For best results, priming the surface first can reduce the need for a second coat. The manufacturer recommended primer for this paint is Diamond Brite 40100 Interior/Exterior Latex PVA Primer Sealer. Diamond Brite cannot guarantee 1 coat coverage on all jobs. read more

Modern Masters
$34.95
at Amazon

Modern Masters Front Door Paints have 24 colors that were carefully selected, utilizing the Emotional Color Wheel and the latest i...n color trends and home design from around the world. The never-fade technology ensures that your door will be as vibrant as the first day it was painted. The two-coat application and quick-dry formula allows you to paint and close your door the same day. read more

Prestige Paints
$39.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. read more

Design House
$22.92
at Amazon

The Barcelona Series features a classic octagonal rosette with robust knob for an updated design. Fits doors 1-3/8" to 1-3/4" thic...k. read more

Prestige Paints
$35.95
at Amazon

Prestige Paints 100% acrylic exterior latex paint and primer in one is a high end paint that is intended to be used on exterior su...rfaces including properly prepared wood, masonry surfaces, cement board siding, vinyl*, aluminum, and factory primed siding. (Note: *When painting vinyl siding do not paint with any color darker than the original siding. Painting with darker colors may cause the siding to warp.) Actual paint colors may vary from on-screen and printer representation. Surface Preparation: Remove dirt, mildew, grease, wax and soap residue, loose and peeling paint. Glossy areas must be dulled by sanding. Prime all bare, new wood and factory primed wood with an oil base primer. Prime masonry surfaces including cementious siding with a latex primer. Application: Stir or mix paint before using and intermix all containers for color uniformity. Apply as is with a high quality brush, roller or pad painter. Thin sparingly with water if necessary for spraying. Do not overspread. Temperature must be above 50 F (10 C). Average coverage 400 sq. ft. (37 square meters) per gallon (3.78 L). For best performance, apply two coats of paint on new surfaces after priming. Do not use indoors. Dry Time: Dries in 1 to 2 hours. Allow to dry overnight before recoating. Low temperature or high humidity may increase dry time. Cleanup: Use warm water and soap. A Flat finish provides a smooth, uniform look. Flat or "matte" finishes get their name from the lack of reflection from the painted surface. This is one of the benefits of a matte finish, because it helps hide surface imperfections, such as dents, nail holes, or patches. Flat finishes often require fewer coats than semi-gloss and gloss paints and also are easier to touch up because there is less contrast between the touch-up paint and the rest of the painted surface. A Semi-Gloss finish is more reflective than satin, but is not as shiny as gloss. Semi-gloss finishes provide walls with a shiny appearance and brighten a wall's appearance. Off-whites and pale shades of lighter colors are punched up and made brighter by the glossy effect created with these finishes. They are ideal for use in areas with high humidity. They are also the easiest to clean (with light scrubbing or wiping), compared to other finishes. The downside to a gloss finish is that it shows almost every imperfection on a wall. read more

Diamond Brite Paint
$32.99
at Amazon

Interior Polyurethane is an ultra Clear/Hard durable finish formulated to protect interior wood surfaces from nicks, scratches, sp...ills and stains. This easy-to-apply polyurethane enhances the natural wood grain with a beautiful, clear finish. Interior Polyurethane is primarily for interior and protected exterior wood surfaces including floors, doors, furniture and cabinets. Coverage Approximately 500 sq. -Feet/gal. (46-60 m˛) depending upon surface porosity. Where to Use Use on bare, stained or previously varnished or finished wood. This product has 6-8 hour drying time (not recommended to use on hot/humid days).Has superior durability, and protects against spills and stains. 6-8 Hr Dry Time; 24 Hr Recoat Time 500 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing. read more

Paint Scentsations
$30.80
at Amazon

Paint SCENTsations is a scent additive for paint. It allows you to add a refreshing fragrance to any painting project. Walls and c...eilings are the largest surface area in your home and now they can smell as good as they look. Simply pour 1 ounce per 1 gallon of paint. Shake or stir thoroughly, then apply as directed by manufacturer. Paint Scentsations produces a pleasant subtle scent that lasts for approximately 3 months depending on environmental conditions. For best results use Paint Scentsations in primer and top coat. Paint Scentsations can be used in any latex or oil-based paints and will not affect the paint's color, sheen, durability or application. read more

Rust-Oleum
$21.97
at Amazon

Use to refresh parking lots, highways, stadiums and more. Apply coating to outdoor concrete or asphalt surface for bright durabili...ty. read more

Diamond Brite Paint
$17.99
at Amazon

Semi-gloss paint is most often used on doors, trim, and cabinets in kitchens or bathrooms. It is easily cleaned and lays down a ni...ce, subtle shine, without being too glitzy. Take care with pre-paint preparation work, as poorly prepared surfaces can be a bit distracting when highlighted by a semi-gloss surface. Clean ability and Durability: A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. Use soap and water. Do not dispose of this product down a drain. For disposal of empty containers and unused product, contact your household refuse collection service.Where to Use Interior: Walls, ceilings, woodwork; bedrooms, family rooms, dining rooms, kids rooms and offices. Surfaces: Wood, drywall, aluminum, masonry, brick, stucco and vinyl. 300-350 Sq. Ft of coverage per gallon.For best results, priming the surface first can reduce the need for a second coat. The manufacturer recommended primer for this paint is Diamond Brite 40100 Interior/Exterior Latex PVA Primer Sealer. read more

York Wallcoverings
$18.79
at Amazon

Large ornate urns filled with a cluster of beautiful open blooms spill out to meet flowering garlands and ornate scrolls in this a...llover pattern of Victorian descent. This historical reproduction of an archival pattern reinvents the past with bold designer colors and metallic luster for a bright future. Base colors spa, almond pearl and metallic graphite partner well with stripes and offer design solutions to tie structural elements to modern design. Made in USA. read more

Diamond Brite Paint
$17.99
at Amazon

Semi-gloss paint is most often used on doors, trim, and cabinets in kitchens or bathrooms. It is easily cleaned and lays down a ni...ce, subtle shine, without being too glitzy. Take care with pre-paint preparation work, as poorly prepared surfaces can be a bit distracting when highlighted by a semi-gloss surface. Clean ability and Durability: A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. Use soap and water. Do not dispose of this product down a drain. For disposal of empty containers and unused product, contact your household refuse collection service.Where to Use Interior: Walls, ceilings, woodwork; bedrooms, family rooms, dining rooms, kids rooms and offices. Surfaces: Wood, drywall, aluminum, masonry, brick, stucco and vinyl. 300-350 Sq. Ft of coverage per gallon.For best results, priming the surface first can reduce the need for a second coat. The manufacturer recommended primer for this paint is Diamond Brite 40100 Interior/Exterior Latex PVA Primer Sealer. read more

True Value
$17.02
at Amazon

True Value Mfg. Company ACP17-GL PCG Gallon White Flat Paint is for interior use. Ideal for walls and ceilings. Quick drying formu...la. Easy soap and water cleanup. High hide for great coverage. Latex based. read more

Diamond Brite Paint
$10.99
at Amazon

High gloss paints have an almost reflective quality, as their shiny finish mimics the look of enamel or plastic. Though not widely... used in home interiors, it is becoming more popular for a dramatic look on cabinets, trim, and furniture in very formal and very contemporary settings. Rather than choosing a high gloss paint for a whole room, use it sparingly in select locations, such as doors and trim. This finish will magnify any surface imperfections, so careful preparation and sanding is essential before painting with high gloss paints. Clean ability and Durability A general rule is that the shinier the paint finish, the better it will stand up to washing and cleaning. For best results; use Diamond-Brite PVA Primer-Sealer to properly prepare and seal the surface before painting. Clean Up & Disposal Use soap and water. Do not dispose of this product down a drain. for disposal of empty containers and unused product, contact your household refuse collection service. Protect from freezing. read more

Paint Scentsations
$30.80
at Amazon

Paint SCENTsations is a scent additive for paint. It allows you to add a refreshing fragrance to any painting project. Walls and c...eilings are the largest surface area in your home and now they can smell as good as they look. Simply pour 1 ounce per 1 gallon of paint. Shake or stir thoroughly, then apply as directed by manufacturer. Paint Scentsations produces a pleasant subtle scent that lasts for approximately 3 months depending on environmental conditions. For best results use Paint Scentsations in primer and top coat. Paint Scentsations can be used in any latex or oil-based paints and will not affect the paint's color, sheen, durability or application. This fragrance accord promotes the freshness of clean laundry with notes of white florals, heliotrope; lily surrounded by velvety woods of cedar and vetiver, as well as clean musks. read more

This item has been added to your list

This item has been added to your sale alerts