Refine By
GearWrench
$8.99
at Sears

Open end provides stronger grip on fasteners, reduces fastener rounding and delivers up to 25% more torque. Offset box end. Size s...tamped on both sides and head of wrench. read more

GearWrench
$49.99 $69.99
at Sears

Tough Wrenches and Fast Moving Ratchets in One Whether you re pulling an alternator, installing a new furnace or tightening up the... plumbing, jobs need to get done no matter how tight the space. Gearwrench Ratchets are equipped with a fine toothed build that allows them to twist nuts and tighten bolts in slim spots with as little as 5 degrees of sweep. And featuring a solid build, turn for turn, this set is built to last. Built to GearWrench s high standards, every wrench in this eight piece set exceeds ANSI, DIN and Federal torque specs, so when you need to throw a little muscle to bust loose stubborn rust or add that little extra tension to lock a bolt in place for keeps, you can. And backed by the Gearwrench commonsense warranty, if any of these wrenches break under normal conditions, it ll be replaced for life. So next time you re pulling up that hood and looking into a tight engine compartment, take these combo ratchets with you, and get a solid turn you can count on, even where there s barely s read more

GearWrench
$71.00 $79.99
at Sears

The GearRatchet drive configuration increases torque strength by as much as 40% and needs as little as 5 degrees of arc. The Vorte...x thin wall socket design has the same torque strength as an ordinary socket. Overall height is reduced by as much as 50% width by 20%. Ultra-thin Vortex hollow socket and extension design reaches into deep recesses, making deep sockets obsolete. Locking Flex GearRatchet handle with 11 locking positions with flexible head. If this wrench, when used for its intended purpose, fails to give you complete satisfaction, we will, at our discretion, send you a free replacement of the same or similar item. For more warranty information call toll free 1-888-757-1812. read more

GearWrench
$24.99
at Sears

A Gearwrench Wrench Set that Packs Fast and Travels Light A solid companion for car or truck, the Gearwrench Microdriver set deliv...ers a powerful grip that torques nuts, bolts, screws and more. Featuring a fine toothed ratcheting design and the ability to quickly swap between attachments, this set tightens and loosens 35 different fasteners, while fitting easily under the driver s seat or in the glove box of any car or seat of any motorcycle. Built with a reinforced ratchet mechanism, this set is tough enough to lean on and bust loose tough bolts, while being nimble enough to complete turns in spaces as tight as 6 degrees. So whether you re swapping you bike s oil at a roadside auto shop, or draining a water tank under your RV, this Gearwrench Wrench Set holds fasteners tight and makes every turn count. Toss one of these in your vehicle before you hit the road, and be ready. read more

GearWrench
$4.99
at Sears

Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which f...orces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. read more

GearWrench
$17.87 $17.99
at Sears

Mini version of our standard pliers for access applications. Features 1/4in jaw capacity.

GearWrench
$12.88 $17.99
at Sears

Mini version of our standard pliers for access applications. Features 1-1/16in jaw capacity.

GearWrench
$16.58 $17.99
at Sears

Long pattern provides access to hard to reach fasteners as well as additional leverage. Open end provides stronger grip on fastene...rs, reduces fastener rounding and delivers up to 25% more torque. Offset box end. Size stamped on both sides and head of wrench. read more

GearWrench
$9.99
at Sears

Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which f...orces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. read more

GearWrench
$12.11 $12.99
at Sears

Innovative dual material handle for comfort and grip. Black oxide non slip tip. Speed zone for turning in lower torque application...s. read more

GearWrench
$5.99
at Sears

Innovative dual material handle for comfort and grip. Black oxide non slip tip. Speed zone for turning in lower torque application...s. read more

GearWrench
$22.42 $22.99
at Sears

This 17mm Wrench Turns Fast and Strong A tight fit in the palm of your hand, the Stubby 17mm Gearwrench combo gets at nuts and bol...ts deep in engines, under sinks and behind appliances where space is limited and grip is hard to come by. A serious addition to any tool box, it s not only built tougher than national and international torque specs, but is a backed by a commonsense lifetime warranty, so it ll keep spinning fasteners for decades. And if you think that s impressive, wait until you slip it onto a bolt in tight quarters.That s when this chrome polished tool truly shines. Featuring an embedded fine toothed ratcheting mechanism, this 17mm Wrench needs only five degrees of sweep to move fasteners, and equipped with Surface Grab machining, it delivers a hold you can trust, even when you re shoulder deep in an engine. If you ever find yourself working on rusty nuts and stubborn over-tightened bolts, Surface Drive is what you need. Designed to direct every ounce of torque away from the corners of f read more

GearWrench
$0.99
at Sears

Pass Thru Sockets are made for use with the GearWrench Pass Thru Ratchet. They eliminate the need for deep sockets. Sockets are al...so broached for use with conventional square drive ratchets. read more

GearWrench
$25.99
at Sears

The X-Beam ratcheting wrench is up to 25% longer to access those hard to reach fasteners. Unique beam design reduces hand fatigue.... Features improved box end strength. Ratcheting box end needs as little as 5 degrees to move fasteners vs. 30 degrees for standard box end wrenches. read more

GearWrench
$8.99
at Sears

Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which f...orces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. read more

GearWrench
$8.99
at Sears

Open end provides stronger grip on fasteners, reduces fastener rounding and delivers up to 25% more torque. Offset box end. Size s...tamped on both sides and head of wrench. read more

GearWrench
$7.99
at Sears

Socket is full polish nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull socke...ts off ratchets. Entry angle guides fastener read more

GearWrench
$17.49
at Sears

The GearWrench features a patented ratcheting box end that needs as little as five degrees of sweep to move a fastener, one-sixth ...of the room needed to do the same with a standard 12-point box end wrench. Fully hardened for extra strength, the wrench features all metal construction that meets or exceeds ANSI, DIN and Federal torque specifications for standard professional combination wrenches. Single hand reversing lever allows you to change direction without losing contact with the fastener. The compact reversing lever helps reinforce the GearWrench's ability to fit in tight places. read more

GearWrench
$24.47 $24.99
at Sears

20 percent longer and 25 percent stronger than standard combination wrenches. Oval shaped beam for improved comfort. Box end stren...gth improved by nearly 20 percent. 5 degree ratcheting arc vs. 30 degree on standard combination wrenches. SurfaceDrive design nearly eliminates fastener rounding. read more

GearWrench
$35.23 $42.99
at Sears

Provides a 5 degree ratcheting arc in tight confined areas. Reversible lever provides quick change from forward to reverse action ...eliminating hand-over-hand turning. read more

GearWrench
$5.99
at Sears

Ergonomic handle allows for greater comfort and torque. Offset box end offers knuckle clearance. Combination configuration for ope...n-end access and box end strength. Full polish for easy clean-up. Enhanced open end design with Surface Drive Plus Technology that prevents fastener rounding. Delivers up to 25% more torque. Size stamped on both sides and head for easy identification. read more

GearWrench
$24.48 $26.99
at Sears

Short beam design gives you great access in compact work areas. Box end flexes 180 degrees at multiple intervals allowing you to a...pproach a fastener from any angle. read more

GearWrench
$27.85 $48.99
at Sears

Compound joint allows for minimal handle opening in tighter spots. Flush rivet joints for strength and narrow profile. Dual dipped... grips for comfort. Available in a three piece set. read more

GearWrench
$5.99
at Sears

Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which f...orces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. read more

GearWrench
$12.99
at Sears

Ball end allows you to work on hex fasteners from difficult angles. Chrome socket base heat treated for durability and serviceabil...ity. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. read more

GearWrench
$59.99 $79.99
at Sears

Gearwrench Ratchets Deliver Reversible Torque in Any Tight Spot The standard in flexibility, this Reversible Gearwrench set delive...rs the grip and versatility of eight standard combination wrenches with a smooth rolling, fine toothed ratcheting system. Perfect for tight spots where your grip on a wrench and flick of a thumb are all you have, this set reverses directions fast and delivers a solid turn with only 5 degrees of sweep. A great addition to any tool box, these wrenches torque each nut and bolt with the hold of Surface Drive , a development that helps eliminate rounding and slip with every twist by focusing torque in the strongest parts of each head. Featuring a polished steel finish, they re easy to wipe clean after every job, no matter if you ve been swapping grass caked lawnmower blades, or working in an oil soaked engine compartment. And when you need to put a little extra muscle behind the wrench to bust loose oxidation or torque that bolt in tight, no worries: each of these Gearwrench R read more

GearWrench
$13.99
at Sears

Compact size lets you work where no other wrench or ratchet can. Ratcheting box end allows movement of fastener with just 5 degree...s of sweep read more

GearWrench
$8.99
at Sears

Socket is full polish nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull socke...ts off ratchets. Entry angle guides fastener read more

GearWrench
$54.98 $68.99
at Sears

Includes the following: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM and 10MM (3/8in Drive) and 12MM, 14MM and 17MM (1/2in Drive). Chrome socket b...ase heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail read more

GearWrench
$28.57 $29.99
at Sears

GearWrench 5-Piece ratcheting wrench set, metric. Consisting of: 9110 10 millimeter combination ratcheting wrench, 9112 12 millime...ter combination ratcheting wrench, 9113 13 millimeter combination ratcheting wrench, 9114 14 millimeter combination ratcheting wrench and 9115 15 millimeter combination ratcheting wrench. Standard pattern ratcheting combination wrenches need as little as 5 degrees to move a fastener vs 30 degrees for standard wrench. Gearwrench surface drive design of box end provides for stronger grip on wrenches and less fastener rounding. Nickel chrome finish for long corrosion resistant tool life. read more

GearWrench
$7.99
at Sears

Chrome socket base heat treated for durability and serviceability. Patented bit holding principle features internal dimple which f...orces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. read more

GearWrench
$12.19 $12.99
at Sears

Socket flexes providing access to hard to reach fasteners. Socket is full polish nickel chrome plated. Large hard stamp identifica...tion. Turn down at base provides grip surface to pull sockets off ratchets. Entry angle guides fastener read more

GearWrench
$5.99
at Sears

Socket is full polish nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull socke...ts off ratchets. Entry angle guides fastener read more

GearWrench
$6.99
at Sears

Socket is full polish nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull socke...ts off ratchets. Entry angle guides fastener read more

GearWrench
$6.99
at Sears

Pass Thru Sockets are made for use with the GearWrench Pass Thru Ratchet. They eliminate the need for deep sockets. Sockets are al...so broached for use with conventional square drive ratchets. read more

GearWrench
$6.99
at Sears

Socket is full polish nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull socke...ts off ratchets. Entry angle guides fastener read more

GearWrench
$19.99
at Sears

Short beam design gives you great access in compact work areas. Box end flexes 180 degrees at multiple intervals allowing you to a...pproach a fastener from any angle. read more

GearWrench
$18.88 $18.99
at Sears

9/16 Inch Stubby Wrench: Big Torque in a Small Package When you re shoulder deep in an engine, or you re straining to reach behind... a dishwasher, make sure this Stubby 9/16 GearWrench is in your hands. Built from rugged alloyed steel and machined to Surface Drive specs, this tool makes heavy torquing easier on every nut and bolt. Designed to give you a grip where other tools fall short, Surface Drive machining directs every ounce of torque to the toughest part of each nut and bolt, helping to end rounding, slip and head stripping, so when you need to put a little muscle behind a stubborn fastener, this wrench gives you the grip you need. Built tough, the 9/16 Inch Stubby Wrench exceeds both national and international torque specs. Not just built for brute force, it features a fine toothed ratcheting mechanism in the box end that is also so nimble, it only needs five degrees of swing to turn any nut. Perfect for tight spots, agile, and backed by a commonsense lifetime warranty, toss this stubby in you read more

GearWrench
$2.99
at Sears

For use with GearWrench Pass-Thru Ratchet and Socket System. Socket is broached for use with conventional square drive ratchets.

GearWrench
$4.99
at Sears

For use with GearWrench Pass-Thru Ratchet and Socket System. Socket is broached for use with conventional square drive ratchets.

GearWrench
$56.99
at Sears

The GearRatchet drive configuration increases torque strength by as much as 40% and needs as little as 5 degrees of arc. The Vorte...x thin wall socket design has the same torque strength as an ordinary socket. Overall height is reduced by as much as 50%, width by 20%. Ultra-thin Vortex hollow socket and extension design reaches into deep recesses, making deep sockets obsolete. Locking Flex GearRatchet handle with 11 locking positions with flexible head. If this wrench, when used for its intended purpose, fails to give you complete satisfaction, we will, at our discretion, send you a free replacement of the same or similar item. For more warranty information call toll free 1-888-757-1812. read more

GearWrench
$14.99
at Sears

Gearwrench Ratcheting Power A flat wrench you can trust, this 11/16 inch powerhouse delivers smooth turns with as little as five d...egrees of sweep, so when you re in a tight spot, like under the hood or under the sink, this is the wrench you reach for. Built tough enough to easily surpass national and international torque specifications, and backed by a commonsense lifetime warranty, every time you need this tight fitting tool, it ll be ready. Machined with Surface Drive , the ratcheting box end of this flat wrench delivers torque to the strongest areas of each fastener helping to eliminate slip and rounding so you get more use from each piece of hardware and more life from every piece of equipment you service. And when you re working in tight spaces reaching around appliances or torquing under sinks, the fine toothed ratcheting mechanism spins with as little as five degrees of sweep, so you can get to work with Gearwrench Ratcheting power, no matter where duty calls. read more

GearWrench
$19.99
at Sears

The X-Beam ratcheting wrench is up to 25% longer to access those hard to reach fasteners. Unique beam design reduces hand fatigue.... Features improved box end strength. Ratcheting box end needs as little as 5 degrees to move fasteners vs. 30 degrees for standard box end wrenches. read more

GearWrench
$4.99
at Sears

Socket is full polish nickel chrome plated. Large hard stamp identification. Turn down at base provides grip surface to pull socke...ts off ratchets. Entry angle guides fastener read more

GearWrench
$22.06 $22.99
at Sears

One finger operated lever with options of locking or not locking positions. 13 locking positions with flexible head. Up to 37% lon...ger than the competition for greater access in hard to reach places. 5 degree ratcheting arc vs. 30 degree on standard combination wrenches. SurfaceDrive design nearly eliminates fastener rounding. read more

GearWrench
$4.99
at Sears

For use with GearWrench Pass-Thru Ratchet and Socket System. Socket is broached for use with conventional square drive ratchets.

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping