Garden Power Tools

Refine By
Nemo Power Tools
$46.35

Connect the durable Nemo Tool Leash to your drill or grinder to make sure you don't lose your tool while working underwater. * All... Nemo products, with the exception of the Pool & Spa Drill, are salt-water capable. read more

See at Jet
CLARE
$2219.00

Power Tool Tester, Power Source 115/230VAC, 50 or 60 Hz, Leakage Current Range 0.4 to 20mA, Current Range 25A, 10A, 4A, and 100mA,... Insulation Resistance Range 0.1 ohm to 99.99 megohm, Insulation Resistance Test Voltage 500VDC, High Voltage Test 2500V,... read more

See at Jet
Dayton
$391.44

Power Tool Motor, Capacitor-Start, 1 HP, 3450 Nameplate RPM, 56Z Frame, Voltage 115/230, 60 Hz, 1 Phase, 11.0/5.5 Full Load Amps, ...Motor Mounting Type Cradle Base, Motor Thermal Protection Manual, Ins. Class A, 1.00 Motor Service Factor, Motor Bearings... read more

See at Jet
Nemo Power Tools
$1197.00

Construction workers, HVAC technicians, and commercial divers can easily carry out a range of fastening applications both underwat...er and on dry land with the Nemo Submersible Impact Driver. The torque on this driver gives you the power you need to... read more

See at Jet
Nemo Power Tools
$3,776.30 $2391.60

The Nemo Submersible Angle Grinder was developed due to the growing demand for an electric submersible power tool for underwater c...utting, grinding, polishing and other high intensity jobs.The Nemo Submersible Angle Grinder is the world’s first and only... read more

See at Walmart
Fein Power Tools
$25.47 $17.02

Fein Starlock 2-Pack Sanding Pad - Standard version. Plastic carrier plate to prevent damage and marks on the workpiece. Triangula...r, hook and loop surface. Includes 2 Starlock sanding pads. Fits most oscillating tool brands. - Application: Small Areas,... read more

See at Walmart
Nemo Power Tools
$2,223.00 $1407.90

The Nemo Submersible Impact Wrench can carry out a wide range of fastening applications both underwater and on dry land. Deliverin...g 170 ft-lbs of maximum torque, this tool is powerful yet compact, weighing in at only 6.39 lbs and measuring only 6... read more

See at Walmart
Do it Best Global Sourcing - Power Tools (3034)
$52.79 $40.77

Project Pro Reciprocating Saw - Economy priced power tool, ideal for DIY. 7.3A motor to cut through lumber, metal, tree limbs, and... a variety of other materials. Stroke length 1-3/16". 300-2700 SPM. Includes 2 blades. UL approved. - Amperage: 7.3A, SPM:... read more

See at Walmart
American Tool Exchange
$64.99

Electric Bench Grinder with 6" Grinding Wheels Power Cutting Tools Specifications: Full Ball Bearings Direct Drive Motor Permanent...ly Lubricated Motor Bearings Adjustable Tool Rest Removable Wheel Covers Free Speed 3450 rpm Volts 110v Wheel size 6" 1/2... read more

See at Walmart
Universal Tool
$29.99 $22.99

This foot control pedal switch for flexible shaft grinder is compatible with 979FSG. It has a wire length of 71in. (180cm), a volt...age: 110-120V/60Hz, and a capacity of 1.5AMPS. Max speed 5,000 to 15,000 RPM #10%. read more

See at Walmart
Nemo Power Tools
$1898.35

The Nemo Submersible Angle Grinder was developed due to the growing demand for an electric submersible power tool for underwater c...utting, grinding, polishing and other high intensity jobs. The Nemo Submersible Angle Grinder is the world's first and... read more

See at Jet
Nemo Power Tools
$2,394.00 $1197.00

Construction workers, HVAC technicians, and commercial divers can easily carry out a range of fastening applications both underwat...er and on dry land with the Nemo Submersible Impact Driver. The torque on this driver gives you the power you need to... read more

See at Walmart
Nemo Power Tools
$1418.15

The Nemo Submersible Impact Wrench can carry out a wide range of fastening applications both underwater and on dry land. Deliverin...g 214 ft-lbs of maximum torque, this tool is powerful yet compact, weighing in at only 6.39 lbs and measuring only 6... read more

See at Jet
Bosch
$52.99 $8.83

OCB2903 Features Nutsetter 3/8'' 2-9/16'' overall length Carded Dimensions Overall Product Weight: 9 lbs

See at Walmart
Nemo Power Tools
$1349.75

The Nemo Hammer Drill offers you the power you need for working with cement, brick, block, or stone in wet or underwater condition...s. Installing concrete anchors, attaching electrical boxes to brick, drilling into tiles in swimming pools and spas and... read more

See at Jet
Allied International
$48.88

The Chicago Power Tools Rotary Tool Workshop includes everything you need to start your own rotary tool workshop. This set include...s a variable speed, pistol grip rotary tool and a full assortment of accessories for polishing, grinding, cutting,... read more

See at Walmart
Dremel
$45.91 $23.99

The VRT1 is designed for small and dusty projects in drywall, wood, glass, ceramic, Styrofoam and a variety of similar dust-produc...ing materials.For the first time ever, you can transform your wet/dry vacuum into a versatile turbine-powered rotary tool.... read more

See at Walmart
Do it Best Global Sourcing - Power Tools (3034)
$53.18 $35.31

Project Pro Oscillating Tool Kit - A multipurpose, versatile tool for sawing, scraping, rasping, cutting, grinding, and polishing.... Works on wood, plaster, paint, metal, and stone. Features include no recoil when sanding in corners and along edges, high... read more

See at Walmart
ATE Tools
$46.44

Power: 500W. Rated Voltage: 110V. Frequency: 60Hz. Planing Width: 0 to 82mm (3-1/4in). Planing Depth: 0 to 2mm (1/16in). No load S...peed: 16500 RPM. A handy electric plane for quick, accurate smoothing of wood. read more

See at Jet
General Tools
$39.68

Drill Grinder Attachment

See at Jet
Milwaukee Electric Tool
$330.83 $312.63

Milwaukee 5196 Specifications: Volts: 120V. Amps: 11. Collet Dia.: 1/8" - 1/4". No Load RPM: 14,500. Length: 21-1/2". Milwaukee 51...96 Features: Tool only. Heavy-Duty MILWAUKEE Built Motors. Strong, Lightweight, Glass Reinforced. Heavy-Duty Aluminum Gear... read more

See at Walmart
Chicago Pneumatic
$48.41

Effortlessly removes rust, cuts metal, plastic and woodVariable speed control from 8000 to 35,000 RPMConvenient thumbwheel speed a...djusterComes with 1/16" and 1/8" collets; read more

See at Walmart
ATE Tools
$47.88

Power: 500W. Rated Voltage: 110V. Frequency: 60Hz. Planing Width: 0 to 82mm (3-1/4"). Planing Depth: 0 to 2mm (1/16"). No load Spe...ed: 16500 RPM. A handy electric plane for quick, accurate smoothing of wood. read more

See at Walmart
Nemo Power Tools
$57.00 $36.10

Connect the durable Nemo Tool Leash to your drill or grinder to make sure you don’t lose your tool while working underwater.* All ...Nemo products, with the exception of the Pool & Spa Drill, are salt-water capable. read more

See at Walmart
Ingersoll Rand
$198.49

Lightweight yet durable design All ball bearing construction Safety release throttle Ergonomic and durable composite housing 0.4 h...p and 20,000/25,000 RPM motor delivers the power you need for the toughest jobs Enhanced grip design and low-profile throttle read more

See at Jet
Hickok
$192.95

Flex Probe Combo Kit

See at Jet
Robinair
$59.72

Resurfacing Grinder, Attachment, Length 61/2 In., Resurfacing Studless Wheel Surfaces Common to Many European Vehicles, Wheel Cent...ers, Any Flat Surface Needing A Good Cleaning, For Use With Vehicles, Material Metal, Plastic, Number of Pieces 1 read more

See at Jet
SPYDER
$7.71

Reciprocating Saw Brush, Primary Saw Application Specialty, Length 6 In., Material Nylon, Shank 1/2 In., Application Grout, Carpet..., Tile, Laminate, Rubber, Concrete, Brick and Other Surface Preparation read more

See at Jet
METABO
$307.62

Angle Grinder, Wheel Dia. 6 In., Nominal Amps 13, No Load RPM 9600, Switch Type Slide, Lock-on Yes, Lock-off No, Voltage 120VAC, S...pindle Thread Size 5/8 In.-11, Tool Length 12-13/32 In., Tool Weight 5.7 lb., Speed Type Single, Handle Design Barrel... read more

See at Jet
Allied International
$48.74

120v lightweight compact mini rotary toolSingle speed 16,000 RPM'sSelf standing storage caseAccept all brand of rotary accessories...Accessories with 1/16 inch, 3/32 inch and 1/8 inch shanks read more

See at Walmart
Nieko
$73.98

Free speed: 10,000rpm. Air consumption: 5cfm. Hose size: 3/8in. Inlet size: 1/4in. Air pressure: 90 psi. Swivel side exhaust. M10 ...x 1.5 spindle. Stall torque resistance. Power twin-chamber motor. Ergonomic grip handle: textured rubber grip. Pro quality... read more

See at Jet
Nieko
$70.98

115/120V 60hz electric motor. 2 adjustable lights. 6 wheel diameter. Quality construction.

See at Jet
IRWIN
$42.49

Use this durable tool around your house for even the toughest task. Engineered with quality craftsmanship, the tool is designed to... get the job done under any circumstances. 0.25 inch hex shank fits most cordless drills, impact driver, corded drills and... read more

See at Overstock
METABO
$288.00

Angle Grinder, Wheel Dia. 7 In., Nominal Amps 15, No Load RPM 8500, Switch Type Trigger, Lock-on Yes, Lock-off Yes, Voltage 120VAC..., Spindle Thread Size 5/8 In.-11, Tool Length 18 In., Tool Weight 12.6 lb., Speed Type Single, Handle Design Rat Tail,... read more

See at Jet
Helicoil
$372.80

Pneumatic Power Tool Adapter, Large, Material Steel, Thread Type Universal, For Use With 5/16 In. to 1/2 In. and M7 to M12 Inserts..., Application Installing Thread Inserts read more

See at Jet
BLACK+DECKER
$19.97

Enhance your tool collection and keep these tools centrally located with this handy Black & Decker 201-Piece Power Tool Accessory ...Set. These tools are made from sturdy and durable materials and are designed for use with power tools. This Black & Decker... read more

See at Jet
Fein
$26.73

Fein MultiMaster Hook and Loop Sandpaper - MultiMaster hook and loop sandpaper. Includes 10 each of: 60 grit, 80 grit, 180 grit, a...nd 240 grit sanding sheets. - Grit: 60/80/180/240, Pkg Qty: 40 read more

See at Jet
K Tool
$337.80 $260.71

Rotary Tool Merchandiser - Holds 8 Displays

See at Walmart
Perform Tool
$24.65

16,000 RPM Fixed Speed Great For Cutting, Grinding, Polishing, Sharpening And Drilling Spindle Lock With 4 Collet Sizes Limited 90... Day Warranty Size: 80pc Rotary Tool. read more

See at Jet
METABO
$215.16

Angle Grinder, Wheel Dia. 4-1/2 In., Nominal Amps 10, No Load RPM 11,000, Switch Type Paddle, Lock-on No, Lock-off Yes, Voltage 12...0VAC, Spindle Thread Size 5/8 In.-11, Tool Length 12-13/32 In., Tool Weight 5.3 lb., Speed Type Single, Handle Design... read more

See at Jet
METABO
$182.93

Angle Grinder, Wheel Dia. 5 In., Nominal Amps 8, No Load RPM 10,500, Switch Type Paddle, Lockon No, Lockoff Yes, Voltage 120VAC, S...pindle Thread Size 5/8 In.11, Tool Length 1113/32 In., Tool Weight 4.6 lb., Speed Type Single, Handle Design Barrel Grip,... read more

See at Jet
Durofix-Ac Delco Power Tools
$67.68

Use on a 3/8 Long or Standard Ratchet. Measuers Static Torque measurement. Operates both clockwise and counter-clockwise. LCD disp...lay displays in N-m, In-Lbs, ft-Lbs, Kg-cm. Audible torque confirmation. Torque Range: 3-59 ft-lbs. Color: As Shown. read more

See at Jet
BEVEL TOOLS
$295.00

Bevel Router Head, Size 12mm, Bevel Angle 45 Degrees , For Use With Mfr. No. 45-12

See at Jet
BEVEL TOOLS
$190.95

Bevel Router Head, Size 8mm, Bevel Angle 60 Degrees , For Use With Mfr. No. R2-08

See at Jet
BEVEL TOOLS
$229.00

Bevel Router Head, Size 8mm, Bevel Angle 45 Degrees , For Use With Mfr. No.45-08

See at Jet
BEVEL TOOLS
$274.31

Bevel Router Head, Size 12mm, Bevel Angle 22 Degrees , For Use With Mfr. No.22-12

See at Jet
Proxxon
$65.69

VTF1014 Features Rotary tool Pen style design is ergonomically fitted for comfortable handling and optimal control Ideal for a var...iety of applications on steel, precious metals, wood, glass and ceramics Specially balanced, permanent magnet motor with... read more

See at Walmart
Capri Tools
$149.99

This easy-to-use professional self vacuum orbital palm sander is designed for body shops and serious users. It has a patented oil-...free design. The housing is made up of composite material. Air system dynamics are considered at every level to bring you... read more

See at Jet
BEVEL TOOLS
$234.00

Bevel Router Head, Size 6mm, Bevel Angle 45 Degrees , For Use With Mfr. No. 45-06-ALU

See at Jet
YG-1 TOOL COMPANY
$15.43

Spotting Drill, Number of Pieces 1, Drill Point (Deg.) 90, Right Hand, Size (In.) 1/2, Flute Length (In.) 0.984, Overall Length (I...n.) 4-1/64, HSS Co, Uncoated Finish, Carbon Steels, Alloy Steels, Aluminum, Stainless, Mild Steel, Bronze read more

See at Jet
Products at Walmart
Better Homes and Gardens Real Estate
Bouquets from FTD

This item has been added to your list

This item has been added to your sale alerts