Refine By

Shop for Electrical at The Home Depot. Raco Round Boxes are 4 in. Dia x 1-1/2 in. deep with three 1/2 in. bottom and two 1/2 in. s...ide knockouts. The round box is used for ceiling fan and ceiling or wall light fixture support. The Raco Insider is also... read more

at Amazon

Raco 0296 4" Octagon Ceiling Fan Support Box, 1-1/2" Deep, 1/2" Side KnockoutsRaco 0296 4" Octagon Ceiling Fan Support Box, 1-1/2"... Deep, 1/2" Side Knockouts Features: Includes nonmetallic sheathed cable connector, mounting hardware, and instructions High strength, hardened screws Knockouts in bottom of box allows for easy entry and exiting with cablesRaco 0296 4" Octagon Ceiling Fan Support Box, 1-1/2" Deep, 1/2" Side Knockouts Specifications: Box Type: RACO Steel Boxes & Covers Box Family: Ceiling Fan Support Boxes, Pans, Braces Box Category: Direct Joist Mount Fan Boxes Category: Ceiling Fan Box Box Depth: 1-1/2' Side Knockout(s): 4, 1/2" Bottom Knockout(s): 3, 1/2" Bracket Type: No bracket Drawn or Welded: Drawn Cubic Inch Capacity: 15.5 UPC Number: 050169002964 Raco ceiling fan support boxes are listed for support of ceiling fans up to 35 pounds Lock-washers prevent the high strength screws from Loosening from vibration Raco fan boxes may serve as fixture support for fixtures up to 50 pounds 1/2" knock outs 15.5 cubic inches 1-1/2" deep 4" octagon read more

$34.99 $16.74

• Ceiling fan box w/brace, 1-1/2 deep, 15.5 cubic inch octagon box• Used to hang ceiling fans and light fixtures betwe...en joists or structural members safely and securely in old work applications where access is limited• Brace allows simple expansion, adjustable form 16 to 24• Recommedned support load for ceiling fan is 35 pounds, for fixtures is 50 pounds• 4 half inch knock outs• Mounting hardware with high strength, hardened screws and instructions included• Acceptable for use in 2-hour rated walls andceilings.• Cu In Cap=15.5 read more


Shop for Electrical at The Home Depot. RACO Square Boxes are 4 in. square by 1-1/2 in. deep. The boxes are welded, with one side h...aving two 1/2 in. and one patented TKO knockout for 1/2 in. or 3/4 in. knockout use. Two adjacent sides have four pryouts with BX clamps. The bottom of the box has one 1/2 in. knockout. A welded HM bracket is positioned on one side of the box for metal or wood stud mounting. Included is a Far-side support for 2-1/2 in. to 6 in. wall cavities and is welded to the bottom of the box. A Bump bottom ground provision with 8 in. long #12 solid copper pigtail included. read more

This item has been added to your list

This item has been added to your sale alerts