Hitachi Hitachi 5/8 In. 5.4 Amp Hammer Drill, 2 Mode, VSR 1/2 in.

Hitachi

Hitachi 5/8 In. 5.4 Amp Hammer Drill, 2 Mode, VSR 1/2 in.

Hitachi 5/8 In. 5.4 Amp Hammer Drill, 2 Mode, VSR 1/2 in.
Not Available
This product is no longer available

5/8in 5.4-Amp Hammer Drill, 2 Mode,

Related

Norge

Norge 1/2 VSR Heavy Duty Drill Flooring . 1/2 VSR Heavy Duty Drill Specs: - 120V~ 60Hz- (5A) - 13mm chuck (1/2) - Load Capacity: 1...00pcs - Variable speed - Power-on indicator - Soft grip - Reversible switch - vz read more

Hitachi
$209.37
at Amazon

Hitachi D13 6.2-Amp Reversible Drill with Drill Press, Handle Joint and Depth Stopper

Hitachi
$89.00
at Amazon

Hitachi D13VF 9-Amp Reversible Drill with Case, Chuck Key and Side Handle

Porter-Cable
$73.99
at Amazon

The PORTER CABLE PC70THD 1/2-Inch VSR 2-Speed Hammer drill features a 7.0 Amp motor that delivers the power and durability to comp...lete the toughest drilling applications. The ability to switch between hammer drill and drill modes provides versatility for drilling into metal, wood, concrete, brick, block and many other materials. The cast metal gear housing helps dissipate heat from internal components for additional durability and a dual speed transmission (0-1,100 & 0-3,100) provides maximum torque in setting one and maximum speed in setting two. A streamlined over mold body and handle allow for increase comfort and reduced user fatigue. Two finger locking trigger provides ease of use during extended use. It also features a side handle that provides more control in heavy applications and bind up situations. A 1/2-Inch metal chuck and key provides holding pressure for increased bit retention. Applications: Optimum performance in hammer drill mode for block, brick, tile and other soft materials Drilling and fastening in metal, wood, plastic and other materials. Includes: PC70THD, chuck key and holder, side handle and depth rod. read more

Wen
$137.99 $112.08
at Sears.com

WEN s 8 inch swing, 5 speed drill press is small but powerful enough to drill through metal, wood, plastics and other materials. M...ax drill capacity is 1/2 in 1 thick cast iron. When you need accurate, repeatable holes; this tool will do the job more... read more

Wen
Dewalt
$138.99
at Amazon

Includes 10.5 Amp 1/2-in VSR Drill Kit with E-Clutch Anti-Lock Control - DWD220R, 360 Degree Locking Side Handle with Soft Grip, C...huck Key with Holder read more

CS Unitec Magnetic Drills

CS Unitec Reversible motor for drilling and tapping applications - holes up to 2 " dia. Variable-speed control in two gears Ideal ...for drilling, tapping and countersinking Compact height of 16-1/2" Lightweight and portable at 29 lbs. Strong 10.5 Amp... read more

CS Unitec Core Drills

CS UNITEC The END 1550 P wet diamond core drill creates holes from 1/4" to 2-5/8" dia. in natural stone, tiles, porcelain, stonewa...re and glass, and holes up to 1-3/16" dia. in reinforced concrete. A standard quick-change system makes changing drill... read more

Buffalo Tools
$29.39
at Amazon

Easily drill into wood, brick and block walls, or metal with the Pro-Series 3/8-Inch Electric Drill. This Electric Drill is ideal ...for DIY, home improvement and general maintenance projects around the house. Hang shelving in the shop or garage, hang decorative shutters and flower boxes on your brick house, or secure railings and fencing to concrete pads. The adjustable trigger dial helps to prevent stripping of the screw while drilling and driving into hardwood or masonry. It features a 3/8-Inch chuck, a forward/reverse switch, and a zero to 3,000 variable speed. A built in level on the top of the drill takes the guess work out of straight or angled drilling and driving. read more

CS Unitec Rotary Hammer Drills

ATEX. Holes cost less with SDS drill bits. Safety clutch protects against overloading and jamming. Hammer drill holes in concrete,... brick and masonry. Rotary drilling mode for straight drilling of steel and wood. read more

CS Unitec Magnetic Drills

CS Unitec Reversible motor for drilling and tapping applications - holes up to 2 " dia. Variable-speed control in two gears Ideal ...for drilling, tapping and countersinking Compact height of 16-1/2" Lightweight and portable at 29 lbs. Strong 10.5 Amp... read more

Hougen Mag Drill Presses

Hougen Quill feed design eliminates gib adjustments and arbor support brackets/spacer for maintenance free operation and fast, smo...oth feed. LED feed rate indicator helps obtain optimum cuting efficiency and long tool life. Optional pressurized coolant... read more

Hougen Mag Drill Presses

Hougen The big brother to the HMD115, The HMD150 is small, powerful, and a has a full 1" depth of cut. It gets into tight spots wi...th the low profile 7-13/16" height. Also it has the new lift detection safety feature, eliminating safety switch... read more

Hougen Mag Drill Presses

Hougen Beginning in November 2006, the family of HMD904 style drills will be assembled with a new hex drive spindle mounting syste...m that allows for faster and easier changeout of drill arbors and accessories. The threaded motor spindle has been... read more

Hougen Mag Drill Presses

Hougen HMD904 Magnetic Drill The mag drill of choice for fabrication. Lightweight, compact, powerful,& versatile. Now better than ...ever... completely Redesigned with More Features. Large 1-1/2" x 2" capacity NEW - Pilot light - for low light or no light... read more

CS Unitec Magnetic Drills

CS Unitec Robust, high-torque 15 Amp motor with four-speed gearbox (100 / 175 / 245 / 385 RPM) Multiple speeds match cutter diamet...er to correct RPM to provide increased tool life and reduced cutter breakage High-density dual-coil magnet has holding... read more

CS Unitec Magnetic Drills

AIRBOR is inherently safer than electromagnetic drills in hazardous atmospheres and wet environments where electricity requires "h...ot work permits." Industry's first completely air-operated magnetic drill- NO ELECTRICITY! Fail-safe permanent magnet is... read more

Milwaukee M18 FUEL Brushless Cordless

Milwaukee Tools M18 FUEL Cordless SDS Plus Rotary Hammer (Bare Tool) 2715-20 Powered by Milwaukee's industry leading FUEL technolo...gy, the M18 FUEL 1-1/8" SDS-Plus Rotary Hammer delivers faster than corded speed, corded durability, and all day work on... read more

CS Unitec Magnetic Drills

Ideal for industrial, construction, marine and mining applications. Hydraulic motor safe for underwater use. Drill structural stee...l and other metals. Stainless steel construction resists corrosion. manually operated permanent magnet with ratchet... read more

Milwaukee M18 FUEL Brushless Cordless

Milwaukee Tools M18 FUEL Cordlesss Hole Hawg 1/2" Right Angle Drill (Bare Tool) 2707-20 The M18 FUEL HOLE HAWG 1/2" Cordless Right... Angle Drill from Milwaukee delivers over 150 7/8" holes per charge and is over 30% lighter weight than its corded... read more

This item has been added to your list

This item has been added to your sale alerts