Refine By

Hanson Rivet Home Improvement

Hanson Rivet
$115.99
at Sears.com

Features and Benefits: Bit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear ...resistance Standard 118 degree point for use in wood, metal and plastic 3/8in reduced shank fits all 3/8in drills Includes metal caseSet includes sizes: 1/16in through 1/2in in 1/64in increments. read more

Hanson Rivet
$32.95 $47.99
at Sears.com

Features and Benefits:Spiral flute sizes: EX-1 thru EX-5Left-hand Cobalt drill bit sizes: 5/64 in. thru 19/64 in. Comes in a plast...ic case read more

Hanson Rivet
$33.25 $52.99
at Sears.com

Features and Benefits:All IRWIN fastener drive bits are manufactured from industrial grade tool steel and tested to meet the highe...st standards for hardness and torque. Includes (1) each of: #2 Phillips power bit x 3-1/2? #3 Phillips power bit x 3-1/2? #2 POZIDRIV power bit x 3-1/2? #1 Phillips power bit x 6? #2 Phillips power bit x 6? T15 TORX power bit x 3-1/2? T20 TORX power bit x 3-1/2? T20 TORX power bit x 6? T25 TORX power bit x 6? T27 TORX power bit x 6? T30 TORX power bit x 6? 1/4? Socket adapter 3/8? Socket adapter 5/16? Magnetic nutsetter 2-1/2? Quick charge chuck 6? Quick change extension read more

Hanson Rivet
$15.95 $30.99
at Sears.com

Features and Benefits: Revolutionary tip design stays sharper longer and drills up to 28 percent faster than other leading drill b...its Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks Bit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance Comes in a metal index caseSet includes drill bit sizes: 1/16in through 1/4in in 1/64in increments. read more

Hanson Rivet
$107.95 $157.99
at Sears.com

Features and Benefits: Cobalt Steel - extended cutting edge life & maintains cutting life after resharpening. 135 degree Split Poi...nt Tip - starts on contact, cuts with less force Reduced Shank above 3/8 inch - allows the use of larger drill bits in a 3/8 inch chuckContains the following drill bit sizes: 1/16 in., 5/64 in, 3/32 in., 7/64 in., 1/8 in., 9/64 in., 5/32 in., 11/64 in., 3/16 in., 13/64 in., 7/32 in., 15/6 in., 1/4 in., 17/64 in., 9/32 in., 19/64 in., 5/16 in., 21/64 in., 11/32 in., 23/64 in., 3/8 in., 25/64 in., 13/32 in., 27/64 in., 7/16 in., 29/64 in., 15/32 in., 31/64 in., 1/2 in. read more

Hanson Rivet
$261.99
at Sears.com

Features and Benefits: Chart showing which drill bits and screw extractors to use to remove the most common sizes of screws and bo...lts Six spiral screw extractors (Ex-1-Ex-6) Thirteen sizes of multi-spline screw extractors (1/8in-1/2in) Sixteen sizes of... read more

Hanson Rivet
$117.99
at Sears.com

Features and Benefits: Oxide treatment resists corrosion, helps prevent bit from rusting 135 degree split point tip starts on cont...act, cuts with less force Reduces shank above 3/8in allows the use or larger drill bits in a 3/8in chuck Rubber overmolded case protects kit if dropped Tap and die selection chart for convenience referenceAutomatic indexing for easy bit accress and identification. Removeable cartridges: easy to carry bits from case to worksite. Contains the following drill bit sizes: 1/16in, 5/64in, 3/32in, 7/64in, 1/8in, 9/64in, 5/32in, 11/64in, 3/16in, 13/64in, 7/32in, 151/6in, 1/4in, 17/64in, 9/32in, 19/64in, 5/16in, 21/6in, 11/32in, 23/64in, 3/8in, 25/64in, 13/32in, 27/64in, 7/16in, 29/64in, 15/32in, 31/64in, 1/2in. read more

Hanson Rivet

Features and Benefits:Sliding handle for tight places and/or extra leverageThree position switch for quick efficient ratcheting ac...tionExtended length makes this wrench ideal for hard-to-reach areasChrome plated for long life and rust resistanceFor taps from: 1/4in-1/2in6mm-12mm read more

Hanson Rivet
$46.95 $73.99
at Sears.com

Features and Benefits: Revolutionary tip design stays sharper longer and drills up to 28 percent faster than other leading drill b...its Three flatted shank design provides better chuck grip and reduces slippage; ideal for use in keyless chucks Bit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance Comes in a metal index caseSet includes drill bit sizes: 1/16in through 3/8in in 1/64in increments. read more

Hanson Rivet
$25.17 $32.99
at Sears.com

Features and Benefits: Three position gear box for quick, efficient ratcheting action Designed for use with taps, reamers, screw e...xtractors and other tools with a square shank For taps 1/4in to 1/2in (6mm to 12mm) read more

Hanson Rivet
$171.99
at Sears.com

Features and Benefits: Titanium Nitride coating extends cutting edge life up to 6 times 135 degree split point starts on contact, ...cuts with less force Reduced shank above 3/8in allows the use of larger drill bits in a 3/8in chuck Rubber overmolded case protects kit if dropped Tap and die selection chart for convenient referenceAutomatic indexing for easy bit access and identification. Removable cartridges: easy to carry bits from case to worksite. Contains the following drill bit sizes: 1/16in, 5/64', 3/32in, 7/64in, 1/8in, 9/64in, 5/32in, 11/64in, 3/16in, 13/64in, 7/32in, 15/16in, 1/4in, 17/64in, 9/32in, 19/64in, 5/16in, 21/64in, 11/32in, 23/64in, 3/8in, 25/64in, 13/32in, 27/64in, 7/16in, 29/64in, 15/32in, 31/64in, 1/2in. read more

Hanson Rivet
$130.99
at Sears.com

Features and Benefits: Oxide treatment resists corrosion, helps prevent bit from rusting Turbomax tip starts up to 10 times faster... Flatted shanks above 11/64in eliminates slippage in drill chuck Reduced shank above 3/8in allows use of larger drill bits in a 3/8in chuck Rubber overmolded case protects kit if droppedTap and drill selection chart for convenience reference. Automatic indexing for easy bit access and identification. Removable cartridges: easy to carry bits from case to worksite. Set contains the following drill bit sizes: 1/16in, 5/64in, 3/32in, 7/64in, 1/8in, 9/64in, 5/32in, 11/64in, 3/16in, 13/64in, 7/32in, 15/16in, 1/4in, 17/64in, 9/32in, 19/64in, 5/16in, 21/64in, 11/32in, 23/64in, 3/8in, 25/64in, 13/32in, 27/64in, 7/16in, 29/64in, 15/32in, 31/64in, 1/2in. read more

Hanson Rivet
$338.99
at Sears.com

Features and Benefits: High carbon steel for hand tapping applications Tap size and recommended drill bit size are etched on each ...tool for easy identification Hexagon dies are best suited to maintenance and repair work Machine screw, fractional and pipe taps Comes in a plastic caseSet includes: Machine Screw Plug Tap and 1in Hexagon Die in sizes: 6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF, 12-24 NC; Fractional Plug Tap and 1in Hexagon Dies in sizes: 1/4in - 20 NC, 1/4in - 28 NF, 5/16in - 18 NC, 5/16in - 24 NF, 3/8in - 16 NC, 3/8in - 24 NF, 7/16in - 14 NC, 7/16in - 20 NF, 1/2in - 13 NC, 1/2in - 20 NF; Fractional Plug Tap and 1-7/16in Hexagon Dies in sizes: 9/16in - 12 NC, 916in - 18 NF, 5/8in - 11 NC, 5/8in - 18 NF, 3/4in - 10 NC, 3/4in - 16 NF; Pipe Thread Plug Tap and 1in Hexagon Dies in sizes: 1/8in - 27 NPT, 1/4in 18 NPT; Threading tools: adjustable die stock - 1in dies, adjustable die stock - 1-7/16in dies, T-handle wrench - taps no. 0 to 1/4in, adjustable handle tap wrench - taps no. 0 to 1/2in, adju read more

Hanson Rivet
$28.57
at Zoro

Riveting Clamp Pliers, Steel Construction, Riveting Clamp Pliers For Installation and Removal of Riveting Clamps

Hanson Rivet
$27.30 $35.00
at Wayfair

Hanson 12"" Ratcheting Tap Extension Wrench Features and Benefits: Features: -Sliding handle for tight places and/or extra leverag...e.-Three position switch for quick efficient ratcheting action.-Extended length makes this wrench ideal for hard-to-reach areas.-Chrome plated for long life and rust resistance.-For taps from: 1/4"-1/2".-6mm-12mm.-12'''' Extended Length Ratcheting Tap Wrench.Dimensions: -Overall Height - Top to Bottom: 1.2.-Overall Width - Side to Side: 6.-Overall Depth - Front to Back: 14.-Overall Product Weight: 1.Warranty: -Lifetime warranty does not cover abuse. 21212 read more

Hanson Rivet
$28.90 $32.08
at Wayfair

Hanson Tap Wrench Ratchet Features and Benefits: Features: -Three position gear box for quick, efficient ratcheting action.-Design...ed for use with taps, reamers, screw extractors and other tools with a square shank.-For taps 1/4" to 1/2" (6mm to 12mm).-1/4'''' to 1/2'''' T-Handle Ratcheting Tap Wrench.Dimensions: -Overall Height - Top to Bottom: 1.-Overall Width - Side to Side: 5.5.-Overall Depth - Front to Back: 5.6.-Overall Product Weight: 0.74.Warranty: -Lifetime warranty does not cover abuse. 21202 read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping