Refine By
Hadco

Hadco DSL2 DownlyteClick here to view Hadco finish options. Square Bracket Downlyte Fixture Type: Downlyte Finish: White Black or ...white thermoset powdercoat Material: Aluminium Voltage Type: Low Voltage Lamping Type 1141 (Lamp Included) Socket: Single contact bayonet (S-8) Housing: Machined aluminium top cap and cast aluminium body with adjustable yoke. Volt/Watt: 12V/18W Wiring: Pre-wired with 8-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted tempered glass lens. Image Shown: DSL2-B read more

Hadco

CLB82 Hadco BeaconClick here to view Hadco finish options. Dome Top Beacon Upper Housing: Die-cast aluminum. Head assembly is moun...ted directly to lower housing with stainless steel screws. Available in three style: cone, dome, or hexagonal style. Lower Housing: Durable single piece compression molded reinforced polyester composite. Color impregnated bronze. Optics: Die-cast aluminum louvers with tempered ribbed glass lens. 180 degree house side shield is supplied with each fixture. Gasket: Molded silicone gasket seals glass and prevents moisture intrusion into the fixture. Finish: Durable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting. Socket: Incandescent and HID: medium base. Fluorescent: GX24q-4 base. Electrical: Standard quad-volt core and coil mounted on removable ballast, with quick connect harness, high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts. Mounting: Lower housing may be ground or concrete mounted. read more

Hadco

Hadco DB14-H BollardsClick here to view Hadco finish options. 14"" Round Top Fixture Type: Bollards Finish: Bronze Highly weather ...resistant CraftStone? finish bonded to the aluminum substrate or durable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting. Consult factory for additional finishes. Material: Aluminium Voltage Type: Line Voltage Lamping A19 Socket: Incandescent and HID: medium base. Fluorescent: GX24q-3 or GX24q-4 base. Housing: Constructed of 5"" extruded aluminum (1/8"" wall). Volt/Watt: 120V/100W Wiring: N/A Mounting: Lower casting is secured to anchor foundation by three (3) galvanized steel bolts and nuts. Before installing anchor bolts, contact factory for latest mounting template. Upper housing/Louvers: Die-cast aluminum. Head assembly is mounted to lower housing with three (3) stainless steel screws. Lens: Clear molded glass, threaded against silicone gasket for tight seal. Electrical: Standard quad-volt core and coil mounted on removable ballast read more

Hadco

Hadco WBH701H Accessory BallastClick here to view Hadco finish options. Wall Mount Ballast Canopy, 70W MH Housing: Cast Aluminum h...ousing and backplate, with stainless steel mounting screws, 1/2"" NPS threaded center. Electrical: 120V Standard. Contact factory for other voltages. Long range ignitor standard. Core and coil ballast encapsulated for moisture resistance. Installation: Mount at least one 1' above ground,over recessed junction box (multiple j-box mounting options). After mounting fixture to canopy, attach backplate to canopy and seal with silicone (provided), to prevent moisture intrusion. Fixture Type: Ballast Volt/Watt: 70W Image Shown: WB read more

Hadco

Hadco BL711-G BullyteClick here to view Hadco finish options. Micro Bullyte Fixture Type: Bullyte Finish: Verde Black, hand-rubbed... verde antiqued over black thermoset powdercoat, bronze, sienna or speckled stone thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping MR11 Socket: Bi-pin type (G4) Housing: Die-cast aluminum with fully-adjustable swivel arm with vibration-proof locking teeth. Volt/Watt: 12V/35W Wiring: Prewired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable. Lens: Clear tempered glass. Shroud: Gasketed, cast aluminum. Image Shown: BL711-A read more

Hadco

Hadco BL1-AL BullyteClick here to view Hadco finish options. Small Bullyte with Long Shroud Fixture Type: Bullyte Finish: Black Bl...ack, hand-rubbed verde antiqued over black thermoset powdercoat, bronze, speckled stone or sienna thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping MR16 Socket: Bi-pin type (GU5.3) Housing: Die-cast aluminum with fully-adjustable swivel arm with vibration-proof locking teeth. Volt/Watt: 12V/75W Wiring: Pre-wired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable. Lens: Clear tempered glass. Shroud: Fully-rotatable, gasketed, die-cast aluminum. Image Shown: BL1-AL read more

Hadco

Hadco CUL7S7 PathlyteClick here to view Hadco finish options. Includes Stem, with Stakes Medium Pathlyte w/Stake, Lamp Fixture Typ...e: Pathlyte Finish: Copper Natural copper will patina with age. Reflective white powdercoated on underside of roof. Verde copper with hand-applied oxide coating will age to a fine patina. Material: Copper Voltage Type: Low Voltage Lamping T3 (Lamp Included) Socket: Bi-pin type (G4) Housing: Spun solid copper roof with solid copper stem. Machined copper threaded adapter for tool-less relamping. Volt/Watt: 12V/20W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted tempered glass lens Post Fitter: 1/2 in NPS fitter Image Shown: CUL7 read more

Hadco

Hadco WBH351A Accessory BallastClick here to view Hadco finish options. Wall Mount Ballast Canopy, 35W MH Housing: Cast Aluminum h...ousing and backplate, with stainless steel mounting screws, 1/2"" NPS threaded center. Electrical: 120V Standard. Contact factory for other voltages. Long range ignitor standard. Core and coil ballast encapsulated for moisture resistance. Installation: Mount at least one 1' above ground,over recessed junction box (multiple j-box mounting options). After mounting fixture to canopy, attach backplate to canopy and seal with silicone (provided), to prevent moisture intrusion. Fixture Type: Ballast Volt/Watt: 35W Image Shown: WB read more

Hadco

CLB81 Hadco BeaconClick here to view Hadco finish options. Cone Top Beacon Upper Housing: Die-cast aluminum. Head assembly is moun...ted directly to lower housing with stainless steel screws. Available in three style: cone, dome, or hexagonal style. Lower Housing: Durable single piece compression molded reinforced polyester composite. Color impregnated bronze. Optics: Die-cast aluminum louvers with tempered ribbed glass lens. 180 degree house side shield is supplied with each fixture. Gasket: Molded silicone gasket seals glass and prevents moisture intrusion into the fixture. Finish: Durable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting. Socket: Incandescent and HID: medium base. Fluorescent: GX24q-4 base. Electrical: Standard quad-volt core and coil mounted on removable ballast, with quick connect harness, high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts. Mounting: Lower housing may be ground or concrete mounted. read more

Hadco

Hadco BU1 BullyteClick here to view Hadco finish options. ULTEM Bullyte Fixture Type: Bullyte Finish: Black Color impregnated mate...rial in black, hand-rubbed verde antiqued over black, or bronze. Material: COMPOSITE Voltage Type: Line Voltage Lamping PAR20 Socket: High temperature porcelain medium base. Housing: One-piece injection molded ULTEM? High Performance Polymer with fully-adjustable swivel arm with vibration-proof locking teeth. Volt/Watt: 120V/50W Wiring: Pre-wired with high temperature #18 wire. Lens: Provided with optional shrouds only. Ballast: Remote ballast housing available for HID models. Image Shown: BU1-A read more

Hadco

Hadco A43-G PathlyteClick here to view Hadco finish options. Arch Stem MNT Pathlyte Fixture Type: Pathlyte Finish: Verde Hand-rubb...ed verde antiqued over black thermoset powdercoat, or old marble with 3 different hand-applied finishes over dark red thermoset powdercoat. Speckled stone, or sienna thermoset powdercoat. Material: Aluminium Voltage Type: Line Voltage Lamping A23 Socket: Porcelain medium base. Housing: Die-cast aluminum construction. Removable roofs for easy relamping. Volt/Watt: 120V/60W Wiring: Incandescent fixtures are pre-wired with high temperature #18 wire. Lens: Opalescent glass panels, removable for cleaning. Post Fitter: 1/2 in NPS fitter Image Shown: AL43 read more

Hadco

Hadco MU5-G PathlyteClick here to view Hadco finish options. Medium Mushroom Fixture Type: Pathlyte Finish: Verde Black, bronze, s...peckled stone or sienna thermoset powdercoat. Hand-rubbed verde antiqued over black powdercoat, or old marble with 3 different hand-applied finishes over dark red thermoset powdercoat. Material: Aluminium Voltage Type: Line Voltage Lamping A19 Socket: Porcelain medium base. Housing: Die-cast aluminum with stainless steel hinges and spring latch providing tool-less entry. Volt/Watt: 120V/100W Wiring: Incandescent pre-wired with high temperature #18 wire. Lens: Frosted, tempered glass sprinkler shield with molded silicone gaskets. Post Fitter: 1/2 in NPS fitter Image Shown: MU5-H read more

Hadco

Hadco MU5-OB PathlyteClick here to view Hadco finish options. Medium Mushroom Brass Fixture Type: Pathlyte Finish: Oiled Brass Nat...ural brass or oiled brass. Material: Brass Voltage Type: Line Voltage Lamping A19 Socket: Porcelain medium base. Housing: Die-cast brass with stainless steel hinges and spring latch, providing tool-less entry. Volt/Watt: 120V/100W Wiring: Incandescent pre-wired with high temperature #18 wire. Lens: Frosted, tempered glass sprinkler shield with molded silicone gaskets. Post Fitter: 1/2 in NPS fitter Image Shown: MU5-H read more

Hadco

Hadco WBH1001A Accessory BallastClick here to view Hadco finish options. Wall Mount Ballast Canopy, 100W MH Housing: Cast Aluminum... housing and backplate, with stainless steel mounting screws, 1/2"" NPS threaded center. Electrical: 120V Standard. Contact factory for other voltages. Long range ignitor standard. Core and coil ballast encapsulated for moisture resistance. Installation: Mount at least one 1' above ground,over recessed junction box (multiple j-box mounting options). After mounting fixture to canopy, attach backplate to canopy and seal with silicone (provided), to prevent moisture intrusion. Fixture Type: Ballast Volt/Watt: 100W Image Shown: WB read more

Hadco

Hadco MUL4-G PathlyteClick here to view Hadco finish options. Small Mushroom Fixture Type: Pathlyte Finish: Verde Black, bronze, h...and-rubbed verde antiqued over black thermoset powdercoat, old marble, speckled stone or sienna thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping T3 (Lamp Included) Socket: Bi-pin type (G4) Housing: Cast aluminium with stainless steel hinges and spring latch providing tool-less entry. Volt/Watt: 12V/20W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted, tempered glass sprinkler shield with molded silicone gaskets Post Fitter: 1/2 in NPS fitter Image Shown: MUL4-H read more

Hadco

Hadco GAML3-AC PathlyteClick here to view Hadco finish options. Garden Art 3-Mushroom Pathlyte Fixture Type: Pathlyte Finish: Anti...que Copper Natural copper with hand-applied oxide coating will age naturally to a fine patina. Material: Copper Voltage Type: Low Voltage Lamping T3 (Lamp Included) Socket: Bi-pin type (G4) Housing: Hand-formed solid copper and copper tubing, mushrooms have unique individual tops.(Large mushrooms is the only one that illuminates) Volt/Watt: 12V/20W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted tempered glass sprinkler shield Post Fitter: 1/2 in NPS fitter Image Shown: GAML3-AC read more

Hadco

Hadco TUL3-G PathlyteClick here to view Hadco finish options. Large Tulip Fixture Type: Pathlyte Finish: Verde Black or hand-rubbe...d verde over black thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping Type 1156 (Lamp Included) Socket: Single contact bayonet (S-8) Housing: One-piece cast aluminium housing with aluminium stem. Volt/Watt: 12V/27W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Post Fitter: 1/2 in NPS fitter Image Shown: TUL3-G read more

Hadco

Hadco BU3 BullyteClick here to view Hadco finish options. ULTEM Bullyte Fixture Type: Bullyte Finish: Black Color impregnated mate...rial in black, hand-rubbed verde antiqued over black, or bronze. Material: COMPOSITE Voltage Type: Line Voltage Lamping PAR30 Socket: High temperature porcelain medium base. Housing: One-piece injection molded ULTEM? High Performance Polymer with fully adjustable swivel arm with vibration-proof locking teeth. Volt/Watt: 120V/100W Wiring: Pre-wired with high temperature #18 wire. Lens: Clear tempered glass permanently affixed at 10? angle for natural cleaning. Post Fitter: 1/2 in NPS fitter Shroud: Fully-rotatable, gasketed, injection molded ULTEM? High Performance Polymer. Image Shown: BU3-G read more

Hadco

Hadco WBH351H Accessory BallastClick here to view Hadco finish options. Wall Mount Ballast Canopy, 35W MH Housing: Cast Aluminum h...ousing and backplate, with stainless steel mounting screws, 1/2"" NPS threaded center. Electrical: 120V Standard. Contact factory for other voltages. Long range ignitor standard. Core and coil ballast encapsulated for moisture resistance. Installation: Mount at least one 1' above ground,over recessed junction box (multiple j-box mounting options). After mounting fixture to canopy, attach backplate to canopy and seal with silicone (provided), to prevent moisture intrusion. Fixture Type: Ballast Volt/Watt: 35W Image Shown: WB read more

Hadco

Hadco CUL7 PathlyteClick here to view Hadco finish options. Includes Stem Medium Pathlyte Fixture Type: Pathlyte Finish: Copper Na...tural copper will patina with age. Reflective white powdercoated on underside of roof. Verde copper with hand-applied oxide coating will age to a fine patina. Material: Copper Voltage Type: Low Voltage Lamping T3 (Lamp Included) Socket: Bi-pin type (G4) Housing: Spun solid copper roof with solid copper stem. Machined copper threaded adapter for tool-less relamping. Volt/Watt: 12V/20W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted tempered glass lens Post Fitter: 1/2 in NPS fitter Image Shown: CUL7 read more

Hadco

Hadco RL4 PathlyteClick here to view Hadco finish options. Large horizon Fixture Type: Pathlyte Finish: Black Black, hand rubbed v...erde antiqued over black thermoset powdercoat, speckled stone or sienna thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping T3 (Lamp Included) Socket: Bi-pin type (G4) Housing: Cast aluminium construction Volt/Watt: 12V/20W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted glass Post Fitter: 1/2 in NPS fitter Image Shown: RL4-A read more

Hadco

Hadco TRL4-G PathlyteClick here to view Hadco finish options. Small TUDOR Fixture Type: Pathlyte Finish: Verde Hand-rubbed verde a...ntiqued over black thermoset powdercoat, old marble, speckled stone, or sienna thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping T3 (Lamp Included) Socket: Bi-pin type (G4) Housing: Die-cast brass with stainless steel hinges and spring latch providing tool-less entry. Volt/Watt: 12V/20W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted, tempered glass sprinkler shield with molded silicone gaskets Post Fitter: 1/2 in NPS fitter Image Shown: TRL4-G read more

Hadco

Hadco MSL12-H PathlyteClick here to view Hadco finish options. Advent w/12"" Stem Fixture Type: Pathlyte Finish: Bronze Black, han...d-rubbed verde antiqued over black thermoset, powdercoat, or bronze thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping Type 1156 (Lamp Included) Socket: Single contact bayonet (S-8) Housing: Cast aluminium with hidden fastners and aluminium stem. Volt/Watt: 12V/27W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Post Fitter: 1/2 in NPS fitter Image Shown: MSL12-G read more

Hadco

Hadco BL5016-GS7BAB BullyteClick here to view Hadco finish options. With Stakes Micro Bullyte, with Stake, Lamp Fixture Type: Bull...yte Finish: Verde Black, hand-rubbed verde antiqued over black, bronze, speckled stone or sienna thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping MR16 (Lamp Included) Socket: Bi-pin type (GU5.3) Housing: Die-cast marine grade aluminum alloy with fully-adjustable swivel arm with vibration-proof locking teeth. Volt/Watt: 12V/20W Wiring: Pre-wired with a 3-ft. pigtail and a quick connector for easy hookup to the supply cable. Lens: Clear tempered glass, affixed at 10? angle for natural cleaning. Shroud: Fully-rotatable,double gasketed, die-cast marine grade aluminum alloy. Image Shown: BL5016-H read more

Hadco

CLB83 Hadco BeaconClick here to view Hadco finish options. Hex Top Beacon Upper Housing: Die-cast aluminum. Head assembly is mount...ed directly to lower housing with stainless steel screws. Available in three style: cone, dome, or hexagonal style. Lower Housing: Durable single piece compression molded reinforced polyester composite. Color impregnated bronze. Optics: Die-cast aluminum louvers with tempered ribbed glass lens. 180 degree house side shield is supplied with each fixture. Gasket: Molded silicone gasket seals glass and prevents moisture intrusion into the fixture. Finish: Durable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting. Socket: Incandescent and HID: medium base. Fluorescent: GX24q-4 base. Electrical: Standard quad-volt core and coil mounted on removable ballast, with quick connect harness, high power factor, dipped in moisture-resistant epoxy coating. Fluorescent uses electronic ballasts. Mounting: Lower housing may be ground or concrete mounted. P read more

Hadco

Hadco WBH701A Accessory BallastClick here to view Hadco finish options. Wall Mount Ballast Canopy, 70W MH Housing: Cast Aluminum h...ousing and backplate, with stainless steel mounting screws, 1/2"" NPS threaded center. Electrical: 120V Standard. Contact factory for other voltages. Long range ignitor standard. Core and coil ballast encapsulated for moisture resistance. Installation: Mount at least one 1' above ground,over recessed junction box (multiple j-box mounting options). After mounting fixture to canopy, attach backplate to canopy and seal with silicone (provided), to prevent moisture intrusion. Fixture Type: Ballast Volt/Watt: 70W Image Shown: WB read more

Hadco

Hadco I2G-H In-GroundClick here to view Hadco finish options. Small Inground with Composite Rock Guard Small Inground w/Composite ...Guard Fixture Type: In-Ground Finish: Bronze Material: N/A Voltage Type: Line Voltage Lamping R30 Socket: PAR or R lamp: medium base.MR16: bi-pin type (GU5.3). PAR36/AR111:double screw terminal base. Fluorescent: GX24q-3 or GX24q-2 base. Housing: Single-piece compression molded, fiberglass reinforced polyester composite housing. Volt/Watt: 120V/100W Wiring: N/A Lens: Clear convex, tempered soda-lime glass for high impact resistance. 2,200-pound live-load rated, standard walk-over. Electrical: Integral electronic transformer converts 120V to 12V; integral electronic fluorescent ballast. Trim Ring: Compression molded polyester, or die-cast stainless steel or natural cast bronze. Rock Guard: Directional for glare control. Compression molded polyester or natural cast bronze. Aiming: MR16 and PAR36 lamps have 15? either side of vertical and 358? rotation. PAR/R 20 or 30 and fl read more

Hadco

Hadco AL41-G PathlyteClick here to view Hadco finish options. Architectural Mushroom w/Glass Finial Fixture Type: Pathlyte Finish:... Verde Verde is hand-rubbed over black thermoset powdercoat, old marble is hand applied over dark red thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping T3 (Lamp Included) Socket: Bi-pin type (G4) Housing: Die-cast brass with stainless steel hinges and spring latch providing tool-less entry. Volt/Watt: 12V/20W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Lens: Frosted, tempered glass sprinkler shield with molded silicone gaskets Finial: Clear seeded glass finial sparkles shield with molded silicone gaskets. Post Fitter: 1/2 in NPS fitter Image Shown: AL41-OM read more

Hadco

Hadco 1019-N BeaconsClick here to view Hadco finish options. Beacon(Cast Bronze) Fixture Type: Beacons Finish: Natural Cast Bronze... Durable powdercoat finish electrostatically applied and bonded by heat fusion thermosetting, to die cast aluminum. Composite beacon HID and fluorescent housing are color impregnated bronze. Cast bronze is natural bronze finish. Material: CAST BRONZE Voltage Type: Line Voltage Lamping A19 Socket: Incandescent: medium base. Fluorescent: GX23-2 base. HID: medium base. Housing: Die-cast aluminum, or single piece compression molded reinforced polyester composite housing, or natural cast bronze. Volt/Watt: 120V/100W Wiring: N/A Mounting: Beacons are partially recessed. Potting compound must be used to seal the conduit wire entry. Upper housing/Louvers: Die-cast aluminum, or injection molded polyester composite resin, or natural cast bronze. Stainless steel screws in roof for easy top access for relamping. Lens: Borosilicate glass refractor lens, fully gasketed top and bottom. read more

Hadco

Hadco TUL1-G PathlyteClick here to view Hadco finish options. Small Tulip Fixture Type: Pathlyte Finish: Verde Hand-rubbed verde a...ntiqued over black thermoset powdercoat. Material: Aluminium Voltage Type: Low Voltage Lamping Type 1156 (Lamp Included) Socket: Single contact bayonet (S-8) Housing: One-piece cast aluminium housing with aluminium stem. Volt/Watt: 12V/27W Wiring: Pre-wired with 3-ft pigtail and a quick connector for easy hookup to the supply cable Post Fitter: 1/2 in NPS fitter Image Shown: TUL1-G read more

Hadco

Hadco B4-H BullyteClick here to view Hadco finish options. Large Bullyte Fixture Type: Bullyte Finish: Bronze Black thermoset powd...ercoat, hand-rubbed verde antiqued over black thermoset powdercoat, or bronze thermoset powercoat. Material: Aluminium Voltage Type: Line Voltage Lamping PAR38 Socket: Porcelain medium base. Housing: Die-cast aluminum with fully-adjustable swivel arm with vibration-proof locking teeth. Volt/Watt: 120V/300W Wiring: Pre-wired with high temperature #18 wire. Lens: BN4, BW4 clear convex tempered glass included with shroud. Post Fitter: 1/2 in NPS fitter Shroud: Fully-rotatable with silicone O-ring gasket, die-cast aluminum. B4, shroud is optional BN4,BW4,shroud included. Ballast: Remote ballasts required for HID lamps Image Shown: B4-H read more

Hadco

Hadco I3ICL Accessory LensInternal Clear (Double) Lens Image Shown: N/A

Hadco

Hadco TBC303-15 Accessory Transformer300VA Inground MultitapInground Transformer 300W QUAD Tap w/Breakers Fixture Type: Transforme...r Volt/Watt: 300W Image Shown: TBC303_603-15 read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping