GearWrench Tap and Die Drive Tool Set - 75-Pc. SAE/Metric Set, Model# KDS3887

Patented Twist Lock Guide System reduces backwalk of die guide and keeps dies centered while cutting threads. Reversible lever with 5 ratcheting arc eliminates hand-over-hand turning. Ideal for wor...

GearWrench
$49.99 $69.99
at Sears

Tough Wrenches and Fast Moving Ratchets in One Whether you re pulling an alternator, installing a new furnace or tightening up the... plumbing, jobs need to get done no matter how tight the space. Gearwrench Ratchets are equipped with a fine toothed build that allows them to twist nuts and tighten bolts in slim spots with as little as 5 degrees of sweep. And featuring a solid build, turn for turn, this set is built to last. Built to GearWrench s high standards, every wrench in this eight piece set exceeds ANSI, DIN and Federal torque specs, so when you need to throw a little muscle to bust loose stubborn rust or add that little extra tension to lock a bolt in place for keeps, you can. And backed by the Gearwrench commonsense warranty, if any of these wrenches break under normal conditions, it ll be replaced for life. So next time you re pulling up that hood and looking into a tight engine compartment, take these combo ratchets with you, and get a solid turn you can count on, even where there s barely s read more

GearWrench
$79.99
at Sears

The GearRatchet drive configuration increases torque strength by as much as 40% and needs as little as 5 degrees of arc. The Vorte...x thin wall socket design has the same torque strength as an ordinary socket. Overall height is reduced by as much as 50% width by 20%. Ultra-thin Vortex hollow socket and extension design reaches into deep recesses, making deep sockets obsolete. Locking Flex GearRatchet handle with 11 locking positions with flexible head. If this wrench, when used for its intended purpose, fails to give you complete satisfaction, we will, at our discretion, send you a free replacement of the same or similar item. For more warranty information call toll free 1-888-757-1812. read more

GearWrench
$59.99 $79.99
at Sears

Gearwrench Ratchets Deliver Reversible Torque in Any Tight Spot The standard in flexibility, this Reversible Gearwrench set delive...rs the grip and versatility of eight standard combination wrenches with a smooth rolling, fine toothed ratcheting system. Perfect for tight spots where your grip on a wrench and flick of a thumb are all you have, this set reverses directions fast and delivers a solid turn with only 5 degrees of sweep. A great addition to any tool box, these wrenches torque each nut and bolt with the hold of Surface Drive , a development that helps eliminate rounding and slip with every twist by focusing torque in the strongest parts of each head. Featuring a polished steel finish, they re easy to wipe clean after every job, no matter if you ve been swapping grass caked lawnmower blades, or working in an oil soaked engine compartment. And when you need to put a little extra muscle behind the wrench to bust loose oxidation or torque that bolt in tight, no worries: each of these Gearwrench R read more

GearWrench
$55.63 $68.99
at Sears

Includes the following: 4MM, 5MM, 6MM, 7MM, 8MM, 9MM and 10MM (3/8in Drive) and 12MM, 14MM and 17MM (1/2in Drive). Chrome socket b...ase heat treated for durability and serviceability. Patented bit holding principle features internal dimple which forces bit surface to the opposite side for maximum retention. S2 and alloy steel bits. Includes slide rail read more

GearWrench
$30.99
at Sears

GearWrench 5-Piece ratcheting wrench set, metric. Consisting of: 9110 10 millimeter combination ratcheting wrench, 9112 12 millime...ter combination ratcheting wrench, 9113 13 millimeter combination ratcheting wrench, 9114 14 millimeter combination ratcheting wrench and 9115 15 millimeter combination ratcheting wrench. Standard pattern ratcheting combination wrenches need as little as 5 degrees to move a fastener vs 30 degrees for standard wrench. Gearwrench surface drive design of box end provides for stronger grip on wrenches and less fastener rounding. Nickel chrome finish for long corrosion resistant tool life. read more

GearWrench
$56.99
at Sears

The GearRatchet drive configuration increases torque strength by as much as 40% and needs as little as 5 degrees of arc. The Vorte...x thin wall socket design has the same torque strength as an ordinary socket. Overall height is reduced by as much as 50%, width by 20%. Ultra-thin Vortex hollow socket and extension design reaches into deep recesses, making deep sockets obsolete. Locking Flex GearRatchet handle with 11 locking positions with flexible head. If this wrench, when used for its intended purpose, fails to give you complete satisfaction, we will, at our discretion, send you a free replacement of the same or similar item. For more warranty information call toll free 1-888-757-1812. read more

GearWrench
$49.99 $59.99
at Sears

Gearwrench Wrench Set: Tough Torque in a Tight Fitting Set Whether you re looking to fill out your travelling tool kit, or replace... those, let s just say, less than premium wrenches, this Standard Wrench Set delivers high torque, superior grip and performance for a lifetime. A serious addition to any mechanic s chest, this four-pack puts a stop to bolt rounding with Surface Drive shaping at the box end, so no matter how hard or fast you re spinning that fastener, slip and rounding are virtually eliminated and you get more mileage out of every nut and bolt. A serious way to bring quality craftsmanship and reliable performance to your tool box, each of these wrenches meets federal, national and international torque specifications and carries a commonsense warranty that backs them for life. And even when you re working in tight spots, these tools are an asset. Built with a fine toothed torquing mechanism, each wrench turns smooth and delivers the tension to tighten or loosen stubborn bolts with as littl read more

GearWrench
$47.44 $56.99
at Sears

This Vortex Socket Set Gives You A Serious Grip The quickest way to transform any GearWrench pass through or square drive ratchet ...into a nut driver, this GearWrench vortex socket set snaps in fast and gives you a solid grip on the smaller fasteners you need to turn. Tons of torque in a tight package, this set is equipped to spin Torx, Phillips, hex and slotted screws without swapping tools, and because each hooks into GearWrench s smooth spinning ratchets, they give you the ability to deliver precisely the amount of torque each job requires, whether you re rebuilding a carburetor, repairing an appliance or putting the finishing touches on Mom s new faucet. Solid, dependable and built to last, this This Vortex Socket Set is crafted from a combination of chrome polished and hardened steels that resist stripping when you re wrenching hard. But the best feature of this 39 piece set is the commonsense lifetime warranty that ensures, no matter how tough the job, this set will be there to give you a solid read more

GearWrench
$183.99
at Sears

A Nut Wrench that Combines Flex and Durability Designed to slip easily over tubing and give soft metals like brass and copper the ...support that they need, this flex flare nut wrench set is the perfect tool for tightening brake lines, fixing refrigerator water dispensers and servicing gas powered appliances. Whether you re a professional mechanic, HVAC technician or weekend pro, this set was designed to give you the kind of grip you can count on, for life. Crafted from tough alloyed steel and built to easily surpass both national and international torque specifications, this inch and metric set delivers with every turn. And backed by a commonsense lifetime warranty, it s ready for decades of hard work and heavy torque. Featuring double flare nut ends mounted with a smooth swiveling pivot, each wrench delivers 180 degrees of torque, flexing easily in tight spots where other wrenches just don t cut it. A serious contribution to any tool chest, this set delivers grip, flexibility and strength that will l read more

GearWrench
$166.99
at Sears

Set includes the following SAE sizes: 3/8in, 7/16in, 1/2in, 9/16in, 5/8in, 11/16in, 3/4in, 13/16in, 7/8in and 15/16in and metric s...izes 10MM, 11MM, 12MM, 13MM, 14MM, 15MM, 16MM, 17MM 18MM and 19MM. Open end provides stronger grip on fasteners, reduces fastener rounding and delivers up to 25% more torque. Offset box end. Size stamped on both sides and head of wrench. Excellent when working in cramped compartments. Includes plastic storage tray. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping