Refine By
Stanley Furniture
$1,249.00 $868.00
at Cymax

Stanley Furniture - Nightstands - 3405381 - About this Product Relaxed ease is the name of game. A Botany Bedside Table in hand-cr...afted finishes is unmatched for practicality and repose. About the Preserve Collection Introducing Preserve by Stanley Furniture, a European-inspired home furnishings collection featuring timeless design motifs. Enveloped in a subdued palette of hand-crafted paint and stain finishes, this collection brings a sense of respite to any room of the home. Features Lamb's Ear finish, a soft warm gray Two (2) drawers One (1) fixed shelf Hand-crafted Specifications Overall Dimensions: 30 H x 25 W x 18 D Overall Product Weight: 71lbs read more

Stanley Furniture
$1,249.00 $868.00
at Cymax

Stanley Furniture - Nightstands - 3407381 - About this Product Relaxed ease is the name of game. A Botany Bedside Table in hand-cr...afted finishes is unmatched for practicality and repose. About the Preserve Collection Introducing Preserve by Stanley Furniture, a European-inspired home furnishings collection featuring timeless design motifs. Enveloped in a subdued palette of hand-crafted paint and stain finishes, this collection brings a sense of respite to any room of the home. Features Rose finish, an antique dusty rose Husk finished top, a weathered natural wood Two (2) drawers One (1) fixed shelf Hand-crafted Specifications Overall Dimensions: 30 H x 25 W x 18 D Overall Product Weight: 71lbs read more

Stanley Furniture
$1,279.00 $857.00
at Cymax

Stanley Furniture - Nightstands - 062C380 - What qualities do you need in a good bedside table? A spacious top that can hold a lam...p for reading or a cup with fresh blooms to brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down.Finish: Morning FogThree drawersSpecifications:Overall Product Dimensions: 30 H x 28 W x 18.5 DOverall Product Weight: 86lbs read more

Stanley Furniture
$1,189.00 $780.00
at Cymax

Stanley Furniture - Nightstands - 062A383 - A night stand should offer you ample storage, but should it not also be lovely to look... at? The Tranquility Isle Night Stand says yes to both ideas. The roomy drawer gives you a place to stow reading glasses or a book, while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Sail Cloth FinishOne drawer2 fixed shelvesSpecifications:Overall product dimensions: 18D x 26H x 28WProduct weight: 53.00 lbs read more

Stanley Furniture
$1,059.00 $714.00
at Cymax

Stanley Furniture - Nightstands - 0586380 - Crafted to meet your every bedside need, the Night Stand is spacious without being ove...rsized. A hidden drawer under the top molding offers a place for reading glasses or other small necessities, while two cedar drawers provide additional storage for larger items, such as reading materials. Elevating the Night Stand from the ordinary are the gently-rounded bun feet and antiqued bronze finish bail pulls.Finish: Burnished HoneyOne drawer under top moldingTwo cedar drawersSpecifications:Overall Product Dimensions: 30.1875 H x 30.3125 W x 18.875 DOverall Product Weight: 94lbs read more

Stanley Furniture
$1,209.00 $780.00
at Cymax

Stanley Furniture - Nightstands - 062E383 - A night stand should offer you ample storage, but should it not also be lovely to look... at? The Tranquility Isle Night Stand says yes to both ideas. The roomy drawer gives you a place to stow reading glasses or a book, while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be.Finish: UrchinOne drawerTwo fixed shelvesSpecifications:Overall Product Dimensions: 28 H x 26 W x 18 DOverall Product Weight: 53lbs read more

Stanley Furniture
$1,459.00 $890.00
at Cymax

Stanley Furniture - Nightstands - 4361382 - The simple silhouette of the Southbridge Bedside Table disguises its generous proporti...ons. Finish: PorterOne spacious drawerOne fixed drawerSolid, durable constructionSimple, elegant designContemporary styleSpecifications:Overall Dimensions: 26.25 H x 30 W x 18 DProduct Weight: 68 lbs read more

Stanley Furniture
$1,239.00 $868.00
at Cymax

Stanley Furniture - Nightstands - 3402381 - About this Product Relaxed ease is the name of game. A Botany Bedside Table in hand-cr...afted finishes is unmatched for practicality and repose. About the Preserve Collection Introducing Preserve by Stanley Furniture, a European-inspired home furnishings collection featuring timeless design motifs. Enveloped in a subdued palette of hand-crafted paint and stain finishes, this collection brings a sense of respite to any room of the home. Features Orchid finish, a washed-out white Two (2) drawers One (1) fixed shelf Hand-crafted Specifications: Overall Dimensions: 30 H x 25 W x 18 D Overall Product Weight: 71lbs read more

Stanley Furniture
$1,059.00 $604.00
at Cymax

Stanley Furniture - Nightstands - 4512380 - Cottage fun. Say good night with the unique Cypress Grove Night Stand. Louvered drawer... fronts, turned knobs and soft cone feet in a glazed white Parchment finish are a fresh take on a traditional bedroom look. All drawers come with fully extending guides for ease of use.Finish: ParchmentThree drawersSpecifications:Overall Product Dimensions: 30.3125 H x 30 W x 18 DOverall Product Weight: 94lbs read more

Stanley Furniture
$1,419.00 $890.00
at Cymax

Stanley Furniture - Nightstands - 4361380 - Boldly crafted knobs accent the elegant Ladera Nightstand. Featuring the elegant Porte...r finish, Ladera Nightstand offers incredible value and style. Finish: PorterThree spacious drawers Boldly crafted knobsSolid, durable constructionContemporary styleSpecifications:Overall Dimensions: 29.13 H x 28 W x 19 DProduct Weight: 105 lbs read more

Stanley Furniture
$1,110.00 $604.00
at Cymax

Stanley Furniture - Nightstands - 4091380 - Modern in design, a Wicker Park Nightstand provides bedside practicality with urbane s...tyle. Drawers are equipped with full-extension drawer guides.Finish: BrownstoneThree drawersSpecifications:Overall Product Dimensions: 30.41 H x 30 W x 18 DOverall Product Weight: 102lbs read more

Stanley Furniture

Eddies in a tidal pool could have inspired the molding that adorns the Calypso Night Stand. Their subtlety plays counterpoint to t...he richness of the design's wood grain creating texture and depth. Two drawers and an electrical outlet in the back handle the things that need to be handy. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Walnut inlay Two drawers Eectrical outlet in back. read more

Stanley Furniture

Curves turned legs and bedside scale evoke mornings along the Maine coast. Stanley Furniture is hand-crafted from fine quality woo...ds and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One Drawer Two Stationary Shelves. Specifications Finish: Gloucester Grey. read more

Stanley Furniture

Ideally suited for smaller spaces the Telephone Table is a nod to an era before cell phones but a design that still holds an immen...se amount of function. Blending a more traditional air in an efficient form the four drawers of the Table are elevated by the sturdy spherical bun feet. A final element of style the subtle metal knobs adorn without distracting due to their understated decorative detailing. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Four drawers. read more

Stanley Furniture

What qualities do you need in a good bedside table? A spacious top that can hold a lamp for reading or a cup with fresh blooms to ...brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. read more

Stanley Furniture

Making the most of Avalon Heights projecting frieze design element the Resonance Moderne Night Stand is the ideal bedside stand-in.... Two drawers offer enough room to house reading materials or other nighttime necessities while a built-in electrical outlet offers a convenient spot to plug in that reading lamp or alarm clock. Scalloped knobs finished in tarnished nickel provide the just-right concluding touch. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Two drawers One electrical outlet. Specifications Finish: Dark Woodtone. read more

Stanley Furniture

What qualities do you need in a good bedside table? A spacious top that can hold a lamp for reading or a cup with fresh blooms to ...brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. read more

Stanley Furniture

For an extraordinary take on the expected bedside table look no further than European Cottage's Night Stand. The three drawer desi...gn is set atop fluted feet and tapered legs and features the subtle adornment of case-finished knobs for an element of feminine appeal. The Night Stand is both timeless and fresh due to its artisan aging techniques and signature serpentine front. An ideal spot to lay your book before a good night's sleep. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. read more

Stanley Furniture

A nightstand should offer you ample storage but should it not also be lovely to look at? The Tranquility Isle Nightstand says yes ...to both ideas. The roomy drawer gives you a place to stow reading glasses or a book while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer Two stationary shelves. read more

Stanley Furniture

Its reduced scale minimizes the drama of the distinctive wavelike profile in the Ripple Cay Night Stand. It has the family trait b...ut its less pronounced on the three smaller drawers. A single simple pull on each drawer bears the arc motif. Ample storage in a bedside piece that looks and feels more substantial than its size. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. Specifications Finish: Shoal. read more

Stanley Furniture

Curves turned legs and bedside scale evoke mornings along the Maine coast. Stanley Furniture is hand-crafted from fine quality woo...ds and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One Drawer Two Stationary Shelves. Specifications Finish: Saltbox White. read more

Stanley Furniture

Crafted to meet your every bedside need the Night Stand is spacious without being oversized. A hidden drawer under the top molding... offers a place for reading glasses or other small necessities while two cedar drawers provide additional storage for larger items such as reading materials. Elevating the Night Stand from the ordinary are the gently-rounded bun feet and antiqued bronze finish bail pulls. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer under top molding Two cedar drawers. read more

Stanley Furniture

The idea that less is more informed the famed fashion designs of Coco Chanel. We took that mantra to heart when designing the Gran...d Rue Night Stand. The three-drawer piece doesn't layer on fancy embellishments; instead the night stand focuses on the fundamentals--storage and function. Those essential needs are satisfied with the design's three drawers and electrical outlet. But beauty is not neglected. The night stand is capped off with a maple inlay on top and genuine brass knobs for that oh-so-perfect finishing touch. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Maple inlay in top Three drawers One partition in top drawer Electrical outlet in back. Specifications Finish: Heirloom Cherry. read more

Stanley Furniture

What qualities do you need in a good bedside table? A spacious top that can hold a lamp for reading or a cup with fresh blooms to ...brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. read more

Stanley Furniture

What qualities do you need in a good bedside table? A spacious top that can hold a lamp for reading or a cup with fresh blooms to ...brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. read more

Stanley Furniture

Simple and stately the Cumberland Night Stand has three drawers with simple brass knobs. Stanley Furniture is hand-crafted from fi...ne quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. Specifications Finish: Classic Mahogany. read more

Stanley Furniture

Cottage fun. Say good night with the unique Cypress Grove Night Stand. Louvered drawer fronts turned knobs and soft cone feet in a... glazed white Parchment finish are a fresh take on a traditional bedroom look. All drawers come with fully extending guides for ease of use. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three Drawers. Specifications Finish: Parchment Distressed: No. read more

Stanley Furniture

Designed with the bedside in mind our Night Stand brings all the best of the British Colonial collection together in one perfectly...-sized piece. The projecting frieze on the top adds dimension while the knobs with their tarnished brass patina add Old World charm. The final touch is the fully-turned bun feet which uplift and lighten the overall appearance Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. read more

Stanley Furniture

A nightstand should offer you ample storage but should it not also be lovely to look at? The Tranquility Isle Nightstand says yes ...to both ideas. The roomy drawer gives you a place to stow reading glasses or a book while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer Two stationary shelves. read more

Stanley Furniture

What qualities do you need in a good bedside table? A spacious top that can hold a lamp for reading or a cup with fresh blooms to ...brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. read more

Stanley Furniture

Curves turned legs and bedside scale evoke mornings along the Maine coast. Stanley Furniture is hand-crafted from fine quality woo...ds and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One Drawer Two Stationary Shelves. Specifications Finish: English Blue. read more

Stanley Furniture

Relaxed ease is the name of game. A Botany Bedside Table in hand-crafted finishes is unmatched for practicality and repose. Stanle...y Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Two Drawers One Fixed Shelf. Specifications Finish: Orchid. read more

Stanley Furniture

Carved frame posts and a subtle serpentine front lend the Swingtime Night Stand an impressive amount of presence in a smaller desi...gn. Featuring three drawers and one electrical outlet the night stand is as functional as it is attractive. Further highlighting the style's straightforward good looks is the lovely cherry finish Chelsea which offers an inviting appeal and the classic scalloped knobs in a thoroughly modern tarnished nickel finish. Put all together it is a night stand that can hold its own next to any bed. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers One electrical outlet. Specifications Finish: Dark Woodtone. read more

Stanley Furniture

A nightstand should offer you ample storage but should it not also be lovely to look at? The Tranquility Isle Nightstand says yes ...to both ideas. The roomy drawer gives you a place to stow reading glasses or a book while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer Two stationary shelves. read more

Stanley Furniture

Carved rosettes on the aptly named Rosette Bedside Table punctuate the three generous fixed shelves of this beautifully accommodat...ing piece. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three fixed shelves. Specifications Finish: Ropemakers White. read more

Stanley Furniture

Crafted to meet your every bedside need the Night Stand is spacious without being oversized. A hidden drawer under the top molding... offers a place for reading glasses or other small necessities while two cedar drawers provide additional storage for larger items such as reading materials. Elevating the Night Stand from the ordinary are the gently-rounded bun feet and antiqued bronze finish bail pulls. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer under top molding Two cedar drawers. read more

Stanley Furniture

In today's world it is nice to harken back to a time when things moved a bit slower. For instance when we had to dial a phone rath...er than push a button. The Tranquility Isle Telephone Table speaks to that bygone era. While it certainly doesn't require you to go back to a rotary telephone it does evoke a less hectic pace when used as a bedside or occasional table. What's more its two drawers and open divided center section provide a variety of storage options a truly modern idea packaged with all the charm of the past. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One fixed partition Two drawers One stationary shelf. read more

Stanley Furniture

A nightstand should offer you ample storage but should it not also be lovely to look at? The Tranquility Isle Nightstand says yes ...to both ideas. The roomy drawer gives you a place to stow reading glasses or a book while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer Two stationary shelves. read more

Stanley Furniture

What qualities do you need in a good bedside table? A spacious top that can hold a lamp for reading or a cup with fresh blooms to ...brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three drawers. Specifications Finish: Urchin. read more

Stanley Furniture

A nightstand should offer you ample storage but should it not also be lovely to look at? The Tranquility Isle Nightstand says yes ...to both ideas. The roomy drawer gives you a place to stow reading glasses or a book while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer Two stationary shelves. Specifications Finish: Urchin. read more

Stanley Furniture

The focus is on the beauty of the wood in our Belle Mode Night Stand. A Cathedral Anigre top is distinguished further by a tooled ...Primavera edge band. But the night stand also provides plenty of function to the bedroom. Three drawers including the partitioned top drawer offer storage space while an electrical outlet on the back is another practical touch. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Cathedral anigre with tooled prima vera edge banded top Three drawers One partition in top drawer One electrical outlet in back. Specifications Finish: Sunlight Anigre. read more

Stanley Furniture

What qualities do you need in a good bedside table? A spacious top that can hold a lamp for reading or a cup with fresh blooms to ...brighten the room? Perhaps drawers to hold reading glasses or a riveting thriller to keep you up all night? Well look no further than our Haven's Harbor Nightstand which can accommodate your every need. Three drawers provide ample storage to stowaway all your essentials and give you a restful environment. It's up to you to put the book down. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include 3 drawers. read more

Stanley Furniture

The Ripple Cay Telephone Table checks in with simplicity functionality and originality. Elevated on a distinct metal base the tabl...e feels open and airy. A generous cubby accommodates things that you like to keep handy a single drawer handles the things you want to keep private. The corrugated drawer front is a restrained continuation of the collection's motif. Combined these traits create a telephone table that moves beyond its function and begins to look like art. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer One stationary shelf Cord management grommet Metal base. Specifications Finish: Blanquilla. read more

Stanley Furniture

Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as alum...inum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Two drawers Cross grain Quartered walnut inlay available in Barrel finish. read more

Stanley Furniture

Curves turned legs and bedside scale evoke mornings along the Maine coast. Stanley Furniture is hand-crafted from fine quality woo...ds and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One Drawer Two Stationary Shelves. Specifications Finish: Spanish Orange. read more

Stanley Furniture

Relaxed ease is the name of game. A Botany Bedside Table in hand-crafted finishes is unmatched for practicality and repose. Stanle...y Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Two Drawers One Fixed Shelf. Specifications Finish: Lamb's Ear. read more

Stanley Furniture

A nightstand should offer you ample storage but should it not also be lovely to look at? The Tranquility Isle Nightstand says yes ...to both ideas. The roomy drawer gives you a place to stow reading glasses or a book while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer Two stationary shelves. Specifications Finish: Stormy Night. read more

Stanley Furniture

Simple in style its one that tried and true. Stanley Furniture is hand-crafted from fine quality woods and often incorporates othe...r quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Three Drawers. Specifications Finish: Gloucester Grey. read more

Stanley Furniture

A nightstand should offer you ample storage but should it not also be lovely to look at? The Tranquility Isle Nightstand says yes ...to both ideas. The roomy drawer gives you a place to stow reading glasses or a book while the two open shelves provide an airy display space that turns the bedroom into the retreat it was meant to be. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include One drawer Two stationary shelves. read more

Stanley Furniture

If you still long for the days of dialing a phone let our Arche Telephone Table take you back in time. This design incorporates ma...ny hallmarks of classic European design including cabriole legs. Mappa burl on the top sets the table apart even more. Whether you place it beside a bed or use it as intended the Arche Telephone Table will enchant you with its simple elegance. Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component Stanley Furniture focuses on how its used to make fine quality furniture. Materials Stanley Furniture is hand-crafted from fine quality woods and often incorporates other quality construction materials such as aluminum steel glass plastic leather and marble. Since wood is the main component well focus on how its used to make fine quality furniture. Hardwood Hardwood refers to all leaf-bearing trees rather than any degree of hardness. Those most often used in furniture construction include ash birch butternut cherry gum mahogany maple oak pecan rosewood teak walnut and yellow poplar. Softwood Trees with needles or foliage that remains green year round. These include cedar fir pine and spruce. Woods for Frame Construction: Ash gum and yellow poplar are often used in frame construction and other interior areas for their strength stability and shock absorption qualities. Wood Preparation Wood contains natural moisture that accounts for as much as one-third of the total weight of lumber when it is ?rst received. ??Curingx9D lumber requires tremendous care and expertise. Our wood is air dried three to six months depending on its thickness; then placed in a dry kiln for two to eight weeks. Moisture content of six to eight percent assures the stability of ?nished furniture in either humid or desert climates. After the lumber is properly dried it is planed and cut to various widths and lengths then matched for color. Even within the same tree color varies greatly. Finishes Sometimes the name on a piece of furniture describes the finish rather than the type of wood used in its construction. For example and oak finish can be applied to an entirely different species of wood. Be sure to check the finish color and species of your furniture. Construction Since wood is sensitive to heat and humidity floating joints must allow for expansion and contraction. For the same reason all joints are not only glued but are held by glue and nail. Features include Mappa burl top One Drawer One fixed shelf. Specifications Finish: Sunlight Anigre. read more

This item has been added to your list

This item has been added to your sale alerts