Freud Freud LM74M010 10-Inch 30 Tooth TCG Glue Line Ripping Saw Blade with 5/8-Inch Arbor and Silver ICE Coating

This blades specifically designed triple chip tooth design produces extremely smooth true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This bl...ade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. Whit this ultimate ripping blade, thee is no need for stabilizers. Application: Heavy Duty Glue Line Ripping Blades For Superior Finish read more

Freud
$220.10
at Amazon

This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.blades have custom designed gullets to minimize chip... build-up and specially formulated carbide for long life.recommend use of a liquid lubricant when cutting.can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts.sticks are not recommended. Application: Cutting Thick Non-Ferrous Materials And Aluminum read more

Freud
$96.50
at Amazon

The LU84R series of saw blades are classic combination design with Freud quality and ingenuity. These industrial saw blades featur...es produced with extreme precision using lasers to cut the hardened blade bodies and tensioning machines to ensure the blades stay true and flat under load. Laser cut blade bodies Tri-metal brazing for impact-resistant tips Covered by Freud's Limited Lifetime Warranty read more

Freud
$135.80
at Amazon

Designed to give long life and excellent finish on the top and bottom of laminates, melamines and veneered plywood. Laser-cut anti...-vibration design yields the plate acoustically dead Reduces the sideways movement of the cutting edge to prevent chipping in man made materials such as laminates. Dramatically extends cutting life and finish. No Scoring blades needed! Application: For Ultra Long Life In Double Sided Man Made Materials read more

Freud
$84.10
at Amazon

In many woodworking shops, one saw must serve multiple purposes such as rip a piece of 4/4 oak and also crosscut a sheet of 3/4" p...lywood. This 10" combination carbide-tipped blade meets the challenge. The blades groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting, plus a large gullet for effective chip clearance. The blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers. read more

Freud
$90.30
at Amazon

This heavy-duty production blade produces an excellent finish on the top and bottom of thick laminates and melamines.LU92M series ...is ideal for cutting stacked 3/4" laminates and melamines.tooth has a special modified triple chip grind design created by computer simulation to breeze through thick stock and single or double-sides laminates, leaving a chip-free edge. Application: Long Life, Production Blades For Single-Sided Laminates And Stacked Chipboard read more

Freud
$89.40
at Amazon

The LU96R is a thin kerf blade that is designed to give long life and excellent finish on the top and bottom of laminates, melamin...e and veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! read more

Freud
$193.40
at Amazon

This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines.Perma-SHIELD coating makes these blad...es resistant to friction and heat build-up.blades pull 1/3 less on the saw, which translates into 33" more cutting power.10 degree hook angle and a triple chip grind provide fast cuts and long cutting life. Application: Long Life, Production Blades For Single-Sided Laminates, Chip Board And Other Manmade Materials read more

Freud
$261.70
at Amazon

This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines.Perma-SHIELD coating makes these blad...es resistant to friction and heat build-up.blades pull 1/3 less on the saw, which translates into 33" more cutting power.10 degree hook angle and a triple chip grind provide fast cuts and long cutting life. Application: Long Life, Production Blades For Single-Sided Laminates, Chip Board And Other Manmade Materials read more

Freud
$85.00
at Amazon

This blades specifically designed triple chip tooth design produces extremely smooth true surfaces for gluing and finish work. The...re is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. Whit this ultimate ripping blade, thee is no need for stabilizers. Application: Heavy Duty Glue Line Ripping Blades For Superior Finish read more

Shop Fox
$2,430.00
at Amazon

Power, capacity and extra features make this 19-inch Heavy-Duty Bandsaw the saw of choice for many serious woodworkers. Once again..., we've pulled out all the stops when it comes to features. We've included an extra-wide table, deluxe 6-inch tall resaw fence that converts to a low-profile fence, rack-and-pinion table tilt mechanism, cast iron table trunnions, cast iron wheels and foot brake. The foot brake not only acts as a safety feature, it also speeds production. All-in-all, you would be hard-pressed to find a bandsaw with more useful features and proven performance than this outstanding machine. read more

Freud
$220.10
at Amazon

This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.blades have custom designed gullets to minimize chip... build-up and specially formulated carbide for long life.recommend use of a liquid lubricant when cutting.can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts.sticks are not recommended. Application: Cutting Thick Non-Ferrous Materials And Aluminum read more

Proto
$170.17
at Amazon

54205 Style: Points:6, Wt.:1362 g (part# 54205) This item features: -Drive Size: 1/2 in. -Drive Type: Square. -Opening Size: 10 m...m, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm, 19 mm, 20 mm, 21 mm, 22 mm, 23 mm, 24 mm. -Tip Type: Box. -Includes: Socket Bar, Socket Clips. -Material: Forged Alloy Steel. -Finish: Nickel Chrome. -Measuring System: Metric. -Locking Type: Ball. -Quantity: 15 per bar. -Price is for 1 Set. read more

OTC
$313.95
at Amazon

OTC Accutorq 0-150 in. pounds Dial Torque Wrench torque wrench features a large easy-to-read dial scale with memory needle and has... chrome-plated steel surrounding the bezel to protect the scale lens and needle. Meets all federal specifications. It includes molded plastic case. One-year warranty. 0-150 in. pounds Accutorq dial torque wrench. read more

OTC
Jet
$2,919.99
at Amazon

The JET CS-315 manual ferrous cold saws are designed for the machine or fabrication shop professional. Designed for heavy-duty use..., JET coldsaws are backed by an industry leading 2 year warranty. and deliver power and precision cut after cut. read more

Jet
OTC
$899.95
at Amazon

OTC Accutorq 100-600 feet pounds Clikker Torque Wrench precision torque wrenches make a loud click when you've reached the torque ...setting. They feature ratcheting heads all-metal construction permanently roll-marked scales and soft-grip rubber handles that enable you to firmly grasp the wrench for right- or left-hand torqueing. It includes molded plastic case. One-year warranty. 100-600 feet pounds Accutorq Clikker torque wrench. read more

OTC
ICS
$835.00
at Amazon

From the company that revolutionized concrete chain saws comes a revolution in diamond chains. Proven to have 1.5 times the tens...ile strength of standard chains, it is the strongest, longest lasting diamond chain ever made. read more

ICS
CDI
$761.73
at Amazon

THE Computorq3 Electronic Torque wrench is a simple to use digital readout wrench that displays real time torque values in any of ...four torque units, ftlbs, in. lbs, Nm., Kg. cm. Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft applications. High Accuracy 1 % Clockwise direction only. It couldn't be easier to use ! read more

CDI
OTC
$149.95
at Amazon

OTC Fuel Pump Module Spanner Wrench for Chrysler Removes and installs the fuel pump retaining ring that holds the fuel pump module... onto the gas tank. It works on most 1994-2005 Chrysler vehicles and 1995-2004 Jeep vehicles. It is similar to Miller 6856. read more

OTC
View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping