Forrest Forrest MM12807 Miter Master 12-Inch 80 Tooth 5/8-Inch Arbor .105-Inch Kerf Wood & Aluminum Cutting Circular Saw Blade

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each... blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 2 Saw Blade For Table Saws. With this one all purpose blade you can RIP & CROSSCUT 1' to 2' hardwood and softwood resulting in a smooth as sanded surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates. Customized Forrest Woodworker 2 For Table Saws. For the advanced table saw operator. Ideal for joinery and special uses. Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result...no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine.20�� Face Hook for easy feedDOUBLE HARD and 40% STRONGER C-4 CARBIDE will give up to 300% longer life between sharpenings.Ends second-step finishing (jointing and sanding not required).Buy and sharpen ONE blade instead of 3, (24T Rip, 50T Combination, 80T Crosscut).Ends cutting 1/16' oversize to allow for RESURFACING read more

related
American Tool
$43.48-$148.49
at Amazon

8-1/4", 40 Tooth Carbide Tipped, Marathon Circular Saw Blade, 5/8" Universal Arbor, Thin Kerf For Fast, Cleaner Cuts, Heat Vents R...educe Heat That Causes Build Up & Pitch, Precision Honed C3 Tungsten Carbide Tips Hold Edge Longer, Round Shape Means Each Tooth Cuts Uniform Equal Amount Of Wood, Blade Flatness Ensures Close Tolerances, Carded. read more

Irwin Tools
$120.01
at Amazon

The Irwin Tools 1807385 Marples Laser Cut 12-Inch 96-Tooth High Alternate Tooth Bevel Circular Saw Blade is part of a full line of... fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry-leading laser-cut, thin kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand. The blades are precision tensioned for flawless cuts. They also feature a heat resistant, non-stick coating that has an Aluminum Matrix added to it to dissipate heat for easy clean up and truer, cleaner cuts. The 12-Inch 96-Tooth blade features a high alternate top bevel where the teeth alternate between a right and left bevel to form a knife like edge on either side for extra fine cutting. This blade is ideal for ultra-smooth cross-cutting on a miter saw. The 12-Inch 96-Tooth blade is ideal for composite materials, plywood, melamine, veneered plywood and delicate molding and does a great job cutting hard woods, soft woods, Double sided laminates and pressure treated lumber. read more

American Tool
$28.41
at Amazon

8-1/4", 24 Tooth Carbide Tipped Marathon Circular Saw Blade, 5/8" Universal Arbor, Thin Kerf For Faster, Cleaner Cuts, Heat Vents ...Reduce Heat That Causes Build Up & Pitch, Precision Honed C3 Tungsten Carbide Tips Hold Edge Longer, Round Shape Means Each Tooth Cuts Uniform Equal Amount Of Wood, Blade Flatness Ensures Close Tolerances, Carded. read more

American Tool
$20.94-$79.74
at Amazon

5-3/8", 24 Tooth, Marathon Cordless Carbide Circular Saw Blade, 10mm Arbor, For Framing/Ripping, Ultra Thin Kerf For More Cuts Per... Charge, Face Ground Carbide Teeth For Fast, Clean Cuts, Aggressive Hook Angle For Fast Cuts, Construction Grade Carbide Teeth For Longer Life, Carded. read more

American Tool
$113.88-$699.90
at Amazon

12", 100 Tooth Carbide Tipped, Marathon Circular Saw Blade, 1" Arbor, Thin Kerf For Faster, Cleaner Cuts, Heat Vents Reduce Heat T...hat Causes Build Up & Pitch, Precision Honed C3 Tungsten Carbide Tips Hold Edge Longer, Round Shape Means Each Tooth Cuts Uniform Equal Amount Of Wood, Blade Flatness Ensures Close Tolerances, Clam Pack. read more

American Tool
$95.05-$613.35
at Amazon

12", 72 Tooth Carbide Tipped, Marathon Circular Saw Blade, 1" Arbor, Thin Kerf For Faster, Cleaner Cuts, Heat Vents Reduce Heat Th...at Causes Build Up & Pitch, Precision Honed C3 Tungsten Carbide Tips Hold Edge Longer, Round Shape Means Each Tooth Cuts Uniform Equal Amount Of Wood, Blade Flatness Ensures Close Tolerances, Clam Pack. read more

American Tool
$39.30-$140.04
at Amazon

10" x 24 Tooth Marathon Circular Saw Blade, 5/8" Arbor, Fast Ripping Blade, Micro Grain C3 Carbide Tips For Longer Life, Deep Gull...ets For Faster Chip Removal & Less Heat Build Up, Aggressive Tip Angle For Fast Cutting, #400 Diamond Ground Tips For Sharper, More Precise Cuts, Clam Pack. read more

American Tool
$71.87-$199.95
at Amazon

10", 60 Tooth Carbide Tipped, Marathon, Circular Saw Blade, 5/8" Arbor, Thin Kerf For Faster, Cleaner Cuts, Heat Vents Reduce Heat... That Causes Build Up & Pitch, Precision Honed C3 Tungsten Carbide Tips Hold Edge Longer, Round Shape Means Each Tooth Cuts Uniform Equal Amount Of Wood, Blade Flatness Ensures Close Tolerances, Clam Pack. read more

American Tool
$90.62-$249.95
at Amazon

10", 80 Tooth Carbide Tipped, Marathon Circular Saw Blade, 5/8" Arbor, Thin Kerf For Faster, Cleaner Cuts, Heat Vents Reduce Heat ...That Causes Build Up & Pitch, Precision Honed C3 Tungsten Carbide Tips Hold Edge Longer, Round Shape Means Each Tooth Cuts Uniform Equal Amount Of Wood, Blade Flatness Ensures Close Tolerances. read more

American Tool
$19.64-$73.32
at Amazon

5-1/2", 18 Tooth, Marathon Cordless Carbide Circular Saw Blade, 10mm Arbor, For Framing/Ripping, Ultra Thin Kerf For More Cuts Per... Charge, Face Ground Carbide Teeth For Fast, Clean Cuts, Aggressive Hook Angle For Fast Cuts, Construction Grade Carbide Teeth For Longer Life, Carded. read more

Irwin Industrial
$2.66-$22.99
at Amazon

Bi-Metal blade made with 8 percent Cobalt keeps teeth sharp longer and increases blade life. Use with materials 3/16" (5mm) and th...icker. Electronic beam weld allows for a more powerful bond. Applications: Wood and Nail Embedded Wood. read more

Irwin Tools
$55.33
at Amazon

585-4935555 Features: -Product Type:Circular. Dimensions: -Overall Length - End to End:8.6 -Overall Height - Top to Bottom:0.2 -Ov...erall Product Weight:0.65 read more

Bosch
$8.15-$9.99
at Amazon

5 Pack, 3" 12 Tooth Wood Cutting Jig Saw Blade, For Scroll Cutting Wood, For Narrow Curve Cutting, Hard & Soft Wood, Plywood, Part...icleboard, & Plastic 5/64" - 3/4", Fits Bosch Models 1581AVS, 1581AVSK, 1584AVS, 1584AVSK, 1587AVS, 1587AVSK, 1587AVSP, As Well As Other Older Bosch Models. read more

American Tool
$21.34
at Amazon

6-1/2", 24 Tooth, Marathon Cordless Carbide Circular Saw Blade, 5/8" Arbor, For Framing/Ripping, Ultra Thin Kerf For More Cuts Per... Charge, Face Ground Carbide Teeth For Fast, Clean Cuts, Aggressive Hook Angle For Fast Cuts, Construction Grade Carbide Teeth For Longer Life, Carded. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping