Refine By
Fluke

Multi-stacking 4 mm banana plugs to mini-hooks which attach to component leads up to 1.5 mm (0.060) in diameter: Maximum ratings f...or non-hazardous aplications 300V, less than 1/2 mA; Maximum ratings for CE compliance 30 Vrms or 60 Vdc, 5 Amps --- Multi-stacking 4 mm banana plugs to mini-pincers which open to 2.3 mm (0.090): Maximum ratings for non-hazardous applications 300V, less than 1/2 mA; Maximum ratings for CE compliance 30 Vrms or 60 Vdc, 5 Amps --- Multi-stacking 4 mm banana plugs to micro-hooks which attach to component leads up to 1 mm (0.040) in diameter: Maximum ratings for non-hazardous applications 150V, less than 1/2 mA; Maximum ratings for CE compliance 30 Vrms or 60 Vdc, 3 Amps --- All have 91 cm (36) long PVC insulated leads --- One year Warranty read more

Fluke

The Pocket Toner connects to any voice, data, or video cable to detect open/short circuits, continuity, AC/DC voltage and dial ton...e all while protecting up to 52 volts.The Pocket Toner comes in three models and several different kit configurations so no matter what your job, you can safely install and test.All of the Pocket Toners have dual audible indicators in the main body and detachable buzzer toner units, removable push on connectors, auto shut-off and easy-to-read indicators. read more

Fluke

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From ind...ustrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running. read more

Fluke
$8,710.00
at Amazon.com

The fluke 294 4 channel. 100 ms/s arbitrary waveform generator and waveform manager plus software incorporates a Compact Flash mem...ory card, giving effectively unlimited storage for waveforms and setups. 100 MS/s 12-bit arbitrary waveform capability. 1M point waveform memory. 40 MHz function generator capabilities using DDS (50 MHz for square waves). 10 ns pulse pattern generator. Waveform sequencing with up to 1024 segments. Unlimited waveform storage using CF memory card. Waveform manager plus for windows software. USB interface in addition to RS-232 and GPIB. These universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms, function generator, pulse/pulse train generator, sweep generator, trigger generator, tone generator, and amplitude modulation source. 115V supply voltage. +/- 14 percent accuracy. 50/60/400 Hz frequency. Measures 335mm length by 350mm width by 130mm height. read more

Fluke

Vibration Sensor Mounting Pads, Enables Adhesive Mounting Of The Sensor To The Drive Train For Better Data Quality, For Use With F...luke-810 (5aer8), Pack Of 10 read more

Fluke

Fluke C550 Rugged Canvas Tool Bag Fluke Corporation is the world leader in the manufacture, distribution and service of electronic... test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. The C550 tool bag is manufactured with a reinforced steel frame. Along with 25 pockets this tool bag has a rugged ballistic cloth and is weather resistant read more

Fluke

The Pocket Toner connects to any voice, data, or video cable to detect open/short circuits, continuity, AC/DC voltage* and dial to...ne* all while protecting up to 52 volts. Identify and test low-voltage, singular coax cables for continuity, opens/shorts and 50-75 termination . Low-voltage protection up to 52 volts . Kit includes NX1 unit, toner, F-type (M-push, Speed 81) adapters & 1-AAA battery read more

Fluke

Interface Cablefor Use With Mfr. No. Fluke-434, Fluke-433/003 Power Quality Analyzers, Features Optically Isolated Usb Interface T...o Computer, Manufacturers Warranty Length 1 Yr. read more

Fluke

C190 Protective hard shell carrying case for 190 series ScopeMeter. OC4USB Optically isolated USB adapter/cable. SW90W/034EFG Fluk...eView software for Windows. English, French and German language. read more

Fluke

EP0328Z, USB TO SERIAL RS232 ADAPTER Fluke EP0328Z USB to serial RS232 adapter Used for 1740 Series 3-phase power quality loggers ...disturbance analyzer Additional Details ------------------------------ Binding: Misc. Label: Fluke Corporation Manufacturer: Fluke Corporation Number of items: 1 Publisher: Fluke Corporation Studio: Fluke Corporation read more

Fluke
$94.95
at Amazon

Product Information:Fluke C550 Heavy Duty 25Pocket Tool Bag features a steel reinforced frame and rugged ballistic cloth with heav...y duty hardware. This large zippered storage compartment with 25 pockets is weather resistant and enables you to carry all your tools to the job. Fluke C550 tool bag comes with a one year warranty. Features:#149; Steel reinforced frame#149; Rugged ballistic cloth with heavy duty hardware#149; Large zippered storage compartment with 25 pockets#149; Weather resistant#149; Carry all your tools to the job#149; One year warranty Specifications:#149; Model Number: C550#149; Item Number: 1547919#149; Color: Black/Yellow read more

Fluke
$239.95
at Amazon

<div class="aplus"><p>The Fluke FoodPro Plus dual infrared and RTD thermometer takes noncontact or contact temperature measurement... and is used to monitor the temperatures of food products and foodservice equipment. This thermometer measures surface temperature from -35 to +275 degrees C (-31 to +527 degrees F) with an infrared sensor and measures internal temperatures from -40 to +200 degrees C (-40 to +392 degrees F) with a built-in fold-out resistance temperature detector (RTD) probe sensor. It has a 2.5:1 infrared distance-to-spot ratio with LED illumination for highlighting the measurement area. Go/No-Go lights indicate when food is in an unsafe temperature range (40 to 140 degrees F) to meet Hazard Analysis of Critical Control Points (HACCP) guidelines. This thermometer is used by foodservice professionals to measure food product and equipment temperatures and help detect potential food safety problems.</p><p>The Fluke FoodPro Plus shows the maximum temperature for reference. The backlit display helps eliminate light reflections and improves contrast in low-light conditions. It has an integrated countdown timer and alarm to help monitor cooking and cooling intervals and food service line inspections. It is Ingress Protection certified IP54 for dust and splashing liquid and can be hand washed without submersion after use. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives. It comes with one 9V battery, a soft case, a calibration certificate with National Institute of Standards and Technology (NIST) traceability and the German Calibration Service (Deutscher Kalibrierdienst, DKD) traceability, and instructions. </p><h5>Specifications</h5><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Infrared temperature range</TD><TD>-35 to +275 degrees C (-31 to +527 degrees F)</TD></TR><TR><TD>Infrared sensor accuracy</TD><TD>0 to 65 degrees C (32 to 150 degrees F): + or - 1 degree C (+ or - 2 degrees F); above 65 degrees C (150 degrees F): + or - 1.5% of the reading; below 0 degrees C (32 degrees F): + or - 1 degree C (+ or - 2 degrees F) + or - 0.1 degree</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Distance-to-spot ratio</TD><TD>2.5:1</TD></TR><TR><TD>Infrared sensor working range</TD><TD>25 to 250mm / 1 to 10 inches</TD></TR><TR BGCOLOR="#dfe1e0"><TD>RTD probe temperature range</TD><TD>-40 to +200 degrees C (-40 to +392 degrees F)</TD></TR><TR><TD>RTD probe accuracy</TD><TD>-5 to +65 degrees C (23 to 150 degrees F): + or - 0.5 degrees C (+ or - 1 degree F); below -5 degrees C (23 degrees F): + or - 1 degree C; above 65 degrees C (150 degrees F): + or - 1% of the reading</TD></TR><TR BGCOLOR="#dfe1e0"><TD>RTD sensor type</TD><TD>Thin Film, Platinum Class A RTD</TD></TR><TR><TD>Display resolution</TD><TD>0.1 degree C / 0.2 degree F</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Power Supply</TD><TD>9V battery</TD></TR><TR><TD>Weight</TD><TD>150g</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Dimensions</TD><TD>165 x 32 x 50mm (H x W x D)</TD></TR></TABLE><br/><p>H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industrial equipment. </p><p>Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.</p><h5>What's in the Box?</h5><UL><LI>Fluke FoodPro Plus dual infrared and RTD thermometer</LI><LI>9V battery</LI><LI>Soft case</LI><LI>Instructions</LI></UL></DIV> read more

Fluke
$79.95
at Amazon

Kit includes 1 mini-hook test lead set, 1 mini-pincer test lead set, 1 micro-hook test lead set. 1 Year warranty.

Fluke
$119.95
at Amazon

<div class="aplus"><p>The Fluke FoodPro infrared thermometer takes noncontact temperature measurement and is used to monitor the s...urface temperatures of food products and foodservice equipment. This thermometer measures temperature from -30 to +200 degrees C (-20 to +390 degrees F) with an accuracy of + or - 1 degree C (+ or - 2 degrees F) from 0 to 65 degrees C (32 to 150 degrees F) and + or - 1.5% of the reading above 65 degrees C (150 degrees F). It has a 2.5:1 infrared distance-to-spot ratio with LED illumination for highlighting the measurement area. Go/No-Go lights indicate when food is in an unsafe temperature range (40 to 140 degrees F) to meet Hazard Analysis of Critical Control Points (HACCP) guidelines. It is Ingress Protection certified IP54 for dust and splashing liquid and can be hand washed without submersion after use. The CE mark indicates compliance with applicable European Union (EU) directives. It comes with one AA battery and instructions. This thermometer is used by foodservice professionals to measure food product and equipment temperatures and help detect potential food safety problems.</p><h5>Specifications</h5><TABLE BORDER=1 WIDTH="800" CELLPADDING=2 CELLSPACING=0><TR BGCOLOR="#dfe1e0"><TD>Temperature range</TD><TD>-30 to +200 degrees C (-20 to +390 degrees F)</TD></TR><TR><TD>Infrared sensor accuracy</TD><TD>0 to 65 degrees C (32 to 150 degrees F): + or - 1 degree C (+ or - 2 degrees F); above 65 degrees C (150 degrees F): + or - 1.5% of the reading; below 0 degrees C (32 degrees F): + or - 1 degree C (+ or - 2 degrees F) + or - 0.1 degree</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Display resolution</TD><TD>0.2 degree C / 0.4 degree F</TD></TR><TR><TD>Distance-to-spot ratio</TD><TD>2.5:1</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Working range</TD><TD>25 to 250mm / 1 to 10 inches</TD></TR><TR><TD>Power Supply</TD><TD>AA battery</TD></TR><TR BGCOLOR="#dfe1e0"><TD>Weight</TD><TD>100g</TD></TR><TR><TD>Dimensions</TD><TD>150 x 30 x50mm (H x W x D)</TD></TR></TABLE><br/><p>H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.</p><p>Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industrial equipment. </p><p>Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.</p><h5>What's in the Box?</h5><UL><LI>Fluke FoodPro infrared thermometer</LI><LI>AA battery</LI><LI>Instructions</LI></UL></DIV> read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping