Refine By
Extech
$159.99
at Amazon

<div class="aplus"> <div style="width: 350px;" class="leftImage"> <div id="image0"><img alt="" src="http://ecx.images-amazon.com/i...mages/I/21ooA4teUGL.jpg" ></div> </div> <h5><div id="header0">ExStik II pH/Conductivity/TDS/Salinity Meter</div></h5> <div id="text0" class="a-spacing-small"><p>The Extech EC500 ExStik features seven units of measure (pH, µS/cm, mS/cm, ppm, ppt, mg/L, g/L), internal memory that stores up to 15 labeled readings for easy recall, adjustable conductivity to TDS ratio factor from 0.4 to 1.0, and self-calibration upon power up.</p></div> <h5><div id="header1">Accurate Sensor Measures Four Parameters</div></h5> <div id="text1" class="a-spacing-small"><p>The EC500 incorporates the latest microprocessor chip technology and patented sensor technology to enable the simultaneous measurement of conductivity, TDS, salinity, and temperature. With the touch of a button the EC500 allows you the flexibility of interchangeable cell constants and has made the job of testing fast, accurate, and repeatable.</p></div> <h4><div id="header2">Applications</div></h4> <ul><li>Wastewater and drinking water analysis</li><li>Environmental tests to determine the health of ponds, streams, wells, and other bodies of water</li><li> Manufacturing processes such as component or PCB rinsing</li></ul> <div class="break"></div><br><h4>Related Products</h4> <div class="rightImage"> <div id="image1"><img alt="" src="http://ecx.images-amazon.com/images/I/11OWxxfIb2L.jpg" ><div class="imageCaption">EC510</div></div> </div> <h5><div id="header3">ExStik II pH/Conductivity/TDS/Salinity/Temperature Kit</div></h5> <div id="text3" class="a-spacing-small"><p>Kit includes the EC500 ExStik pH/Conductivity/TDS/ Salinity/Temperature Meter, with EC505 sensor, protective cap, 84?S/cm, 1413?S/cm and 12880?S/cm Conductivity calibration standards (30mL bottle each), pH buffer pouches (one each of 4, 7, 10 pH plus rinse solution), weighted base, three sample cups with caps, four 3V CR-2032 batteries, 48" (1.2m) neckstrap, and carrying case.</p></div> <div class="break"></div> </div> read more

Extech
$189.99
at Amazon

<div class="aplus"> <div class="two-third-col"><div style="width: 350px;" class="leftImage"> <div id="image0"><img alt="" src="htt...p://ecx.images-amazon.com/images/I/21P7mRo+TiL.jpg" ></div> </div> <h5><div id="header0">ExStik Waterproof Chlorine Meter</div></h5> <div id="text0" class="a-spacing-small"><p>This revolutionary technique measures Direct Total Residual Chlorine from 0.01ppm to 10ppm. It makes non-subjective measurements ? unaffected by interferences associated with traditional colorimeters and spectrophotometers like sample color, turbidity, light, and pollutants.</p></div> <h5><div id="header2">Includes</div></h5> <div id="text2" class="a-spacing-small"><p>This product comes with an electrode, five packs of 10 reagent tablets (50 tests), a protective sensor cap, a sample cup with cap, four CR2032 batteries, and a 48? neckstrap.</p></div> </div><div class="third-col last"><h4><div id="header1">Additional Features</div></h4> <ul><li>Unique flat surface electrode eliminates any concerns for clogged junctions or glass breakage</li><li>Self-calibration uses reagent tablets for consistent results</li><li>EPA approved methodology</li><li>Waterproof to IP57</li><li>Large LCD simultaneously displays ppm of Total Chlorine and Temperature plus an analog bargraph indicator for viewing trends</li><li>Memory stores 15 readings</li></ul></div><div class="break"></div><br> <h4>Related Products</h4><div class="sixth-col"> <div class="centerImage"> <div id="image1"><img alt="" src="http://ecx.images-amazon.com/images/I/21P3wY2us0L.jpg" ><div class="imageCaption">CL204</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">ExTab Reagent tablets for the Extech CL200 Chlorine Meter</div></h5> <div id="text3" class="a-spacing-small"><p>Includes 100 packs (10 tablets each). Requires one tablet per test-enough for 1000 tests. Foil packaging provides very stable environment with long shelf life. No messy powder reagents.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img alt="" src="http://ecx.images-amazon.com/images/I/21P3wY2us0L.jpg" ><div class="imageCaption">CL203</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">ExTab Reagent tablets for the Extech CL200 Chlorine Meter</div></h5> <div id="text4" class="a-spacing-small"><p>Includes 10 packs (10 tablets each). Requires one tablet per test-enough for 100 tests. Foil packaging provides very stable environment with long shelf life. No messy powder reagents.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image3"><img alt="" src="http://ecx.images-amazon.com/images/I/01MyYgqPMcL.jpg" ><div class="imageCaption">CL205</div></div> </div> </div> <div class="third-col"> <h5><div id="header5">Spare Chlorine Electrode For Extech CL200 Chlorine Meter</div></h5> <div id="text5" class="a-spacing-small"><p>Replacement flat surface electrode for use with the ExStik Chlorine Meter. Easy to clean, rugged flat surface Chlorine electrode. Measures Chlorine and temperature. Interchangeable with ExStik pH (PH100/PH110) or ORP (RE300) meters. Complete with protective connector cap.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img alt="" src="http://ecx.images-amazon.com/images/I/11f+0kt9C8L.jpg" ><div class="imageCaption">CL207</div></div> </div> </div> <div class="third-col last"> <h5><div id="header6">Chlorine Calibration Standard</div></h5> <div id="text6" class="a-spacing-small"><p>1ppm standard for use with the Extech CL200 Chlorine Meter and other chlorine meters requiring calibration and accuracy checks. Complete with 3 ampules (20mL each).</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header7"></div></h5> <div id="text7" class="a-spacing-small"></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header8"></div></h5> <div id="text8" class="a-spacing-small"></div> </div> <div class="break"></div> </div> read more

Extech
$119.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 250px;"><div id="image0"><img src="http://ecx.images-amazon.com/images/I/...21qXi+gCwbL.jpg" alt="" ></div></div> <div class="rightImage" style="width: 250px;"></div> <h5><div id="header0">LED Light Meter</div></h5> <div id="text0" class="a-spacing-small"><p>The LT40 LED light meter is useful for measuring and optimizing environmental light levels in a wide range of environments, including office buildings, manufacturing plants & warehouses, university campuses, schools, hospitals, and many other locations. OSHA regulates workplace lighting because illumination must be adequate for assigned tasks, and light meters are used to verify regulatory compliance, as well as state and local public safety codes and ordinances. Use of LED lighting is on the rise because it is more efficient to operate, it emits stable, high quality illumination, and the technology is dropping in price. Besides LED lighting, the LT40 can measure standard light sources ? fluorescent, metal halide, high pressure sodium and incandescent ? up to 400,000 lux (40,000 Fc).</p></div> <h5><div id="header1">Key Features</div></h5> <div id="text1" class="a-spacing-small"><p>The key features on the LT40 include: overload indication; maximum/average/minimum memory hold; data hold; auto range adjustment (to optimize accuracy and resolution); cosine and color-corrected measurements; auto power off (with disable function); 4000-count display; and tripod mount.</p></div> <h5><div id="header2">Includes</div></h5> <div id="text2" class="a-spacing-small"><p>The LT40 comes with a built-in sensor with protective cover, two AAA batteries, storage pouch, and user manual.</p></div> <div class="break"> </div> <br> <h5><div id="header3">Applications</div></h5> <div id="list0"><ul><li>Factories & warehouses</li><li>Office buildings</li><li>Retail stores</li><li>Restaurants</li><li>Hospitals</li><li>Libraries</li><li>Schools & universities</li><li>Parking garages</li><li>ATM locations</li><li>Museums</li><li>Art galleries</li><li>Safety & security</li><li>Photography & videography</li></ul></div> </div> read more

Extech
$179.99
at Amazon

Temperature/Humidity Data logger Kit with PC Interface --- Compact, powerful and easy to use - records up to 16,000 readings.

Extech
$80.99 $89.99
at Casa

Non-contact probe audibly identifies selected wire or cable. Trace phone, computer network and coax cables. Tone generator is term...inated with RJ11 and RJ45 connectors plus alligator clips. Selectable continuous or variable tone. Continuity and ring/tip identification test Dimensions: 1.0 IN x 9.0 IN x 2.3 IN read more

Extech
$849.00
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../31eUOQaorsL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Water Restoration Contractor Kit</div></h5> <div id="text0" class="a-spacing-small"><p>The Extech MO290-RK Water Restoration Contractor Kit includes the MO290 moisture meter for measuring moisture in various wood types and building materials, as well as monitoring a variety of key ambient conditions. The kit also includes a variety of probes for checking moisture levels in hard wood, under baseboards, in between walls, and under plywood subflooring.</p></div> <h5><div id="header1">Kit Overview</div></h5> <div id="text1" class="a-spacing-small"><p>The MO290-RK kit includes an MO-P1 pin probe, MO290-HP hammer probe, MO290-EP deep wall probe and an MO290-BP baseboard probe for all contact moisture readings. MO290 also incorporates a pinless sensor that detects moisture in wood and building materials with virtually no surface damage, as well as a built-in IR thermometer for taking non-contact temperature readings.</p></div> <h5><div id="header2">What's in the Box</div></h5> <div id="text2" class="a-spacing-small"><p>The MO290-RK includes the RHT10 USB Humidity and Temperature datalogger with RHT10-SW software for GPP (g/kg) calculations. The MO290's built-in sensor measures Air Temperature, Relative Humidity, GPP (grains per pound), Dew Point and Vapor Pressure. The kit includes a carry case, 9-volt battery, and user manual.</p></div> <div class="break"></div><br> <h4>More Extech Instruments & Accessories to Choose From</h4> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/11ltVcftirL.jpg" alt="" ><div class="imageCaption">MO290 <br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">Pinless Moisture Psychrometer + IR</div></h5> <div id="text3" class="a-spacing-small"><p>The Extech MO290 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. The remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes complete with a pin moisture probe (MO-P1), one 9-volt battery, carrying case, and user manual. Optional specialty moisture probes are available.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/112mMX8IpiL.jpg" alt="" ><div class="imageCaption">MO295 <br>View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">Pinless Moisture Psychrometer + IR</div></h5> <div id="text4" class="a-spacing-small"><p>The Extech MO295 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. The remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include store/recall 20 readings in memory, fast analog bargraph for viewing moisture trends, programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes complete with a pin moisture probe (MO-P1), one 9-volt battery and a carrying case. Optional specialty moisture probes are available.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image3"><img src="http://ecx.images-amazon.com/images/I/11brZ-dUBCL.jpg" alt="" ><div class="imageCaption">MO297<br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header5">Pinless Moisture Psychrometer + IR and Bluetooth</div></h5> <div id="text5" class="a-spacing-small"><p>The Extech MO297 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer and METERLiNK (Bluetooth) transmitter that wirelessly transmits moisture and humidity data to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images. The pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. A remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and a 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include store/recall 20 readings in memory, fast analog bargraph for viewing moisture trends, programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes with a pin moisture probe (MO-P1), one 9-volt battery, and a carrying case. Optional specialty moisture probes are available.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img src="http://ecx.images-amazon.com/images/I/11kPEr6AOdL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header6">MO290-EP</div></h5> <div id="text6" class="a-spacing-small"><p>Extension Probe for Model MO265/290/295/297 Moisture Meters with 30-inch (76.2cm) cable and four pins</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image5"><img src="http://ecx.images-amazon.com/images/I/11iTQrHb-aL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header7">MO290-HP</div></h5> <div id="text7" class="a-spacing-small"><p>Hammer Probe for Model MO265/290/295/297 Moisture Meters includes four pins (1.6-inch/4cm pin depth)</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image6"><img src="http://ecx.images-amazon.com/images/I/11Wy9RG9viL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header8">MO290-BP</div></h5> <div id="text8" class="a-spacing-small"><p>Moisture Baseboard Probe for Model MO265/290/295/297 Moisture Meters (dual fixed flat pins with 4.1-inch/10.5cm pin length) with 30-inch cable</p></div> </div> <div class="break"></div> </div> read more

Extech
$199.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../21zQBQJQ+KL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Type 2 Sound Meter</div></h5> <div id="text0" class="a-spacing-small"><p>Sound Level Meter meets ANSI and IEC 651 Type 2 standards. Ideal for noise surveys in the workplace, installing fire alarms and speaker systems, and enforcing noise ordinances.</p></div> <h5><div id="header1">Additional Features</div></h5> <div id="text1" class="a-spacing-small"><p>Measures from 35 to 130 dB in two ranges and has an accuracy of ±1.5 dB. Data Hold and Max Hold functions. Backlit display allows use in dimly lit areas.</p></div> <h5><div id="header3">What is a Sound Level Meter?</div></h5> <div id="text3" class="a-spacing-small"><p>Sound level meters are instruments designed to respond to noise much like the human ear. The measurements taken by sound level meters are compared to known standards to determine if the noise level could have a detrimental effect on human hearing.</p></div> <h5><div id="header4">Types of Sound Level Meters</div></h5> <div id="text4" class="a-spacing-small"><ul><li>Type 3 ? Low cost models for basic sound checks.</li><li>Type 2 ? Models that meet OSHA and other ordinance testing requirements.</li><li>Type 1 ? Precision for lab testing (Extech doesn't have one).</li><li>Dosimeters ? Measure work noise exposure according to OSHA.</li><li>Analyzer ? analyzes noise in narrow bands.</li></ul></div> <h5><div id="header2">What's in the Box</div></h5> <div id="text2" class="a-spacing-small"><p>Comes with microphone windscreen, 9-volt battery, and user manua. Model 407732-NISTL is also available with a Certificate of Calibration traceable to NIST at a single calibration point to 94 dB.</p></div> <div class="break"></div><br> <h4>More Extech Instruments to Choose From</h4> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image3"><img src="http://ecx.images-amazon.com/images/I/01lOmX-zevL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header5">407730 Sound Level Meter</div></h5> <div id="text5" class="a-spacing-small"><p>Records sound levels from 40 to 130 decibels with ±2 dB accuracy and 0.1 dB resolution. It features a large, 2000 count LCD display with a fast responding analog bargraph for viewing trend. Additional features include: Min/Max, Max Hold, Auto Power off, and an analog AC output for connection to chart recorders and dataloggers. Complete with microphone windscreen, four AAA batteries, and user manual.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img src="http://ecx.images-amazon.com/images/I/11HGSOdw+4L.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header6">407732-Kit Sound Level Meter Kit</div></h5> <div id="text6" class="a-spacing-small"><p>Type 2 Sound Level Meter Kit meets ANSI and IEC 651 Type 2 standards. Ideal for noise surveys in the workplace, installing fire alarms and speaker systems, and enforcing noise ordinances. Measures from 35 to 130 dB in two ranges and has an accuracy of ±1.5 dB. Data hold and Max hold functions. Backlit display allows use in dimly lit areas. Kit comes complete with 407732 sound meter, 407744 94 dB Sound Calibrator, microphone windscreen, three 9-volt batteries, hard carrying case, and user manual. Model 407732-Kit-NIST is also available with a Certificate of Calibration traceable to NIST which includes 407732-NIST Sound Level Meter and 407722-NIST Sound Calibrator.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image5"><img src="http://ecx.images-amazon.com/images/I/11u7hIBI3PL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header7">407750 Sound Level Meter with PC Interface and Background Noise Filter</div></h5> <div id="text7" class="a-spacing-small"><p>Integer ut urna libero, ac pulvinar risus. Etiam vel metus metus, ullamcorper tristique magna. Suspendisse in sem ac velit adipiscing porta eu in quam. Donec facilisis massa sit amet diam mollis id ornare leo porttitor. Maecenas viverra laoreet metus, sed aliquam nisl facilisis eu. Aliquam erat volutpat. Donec ligula neque, lacinia sit amet dignissim vitae, tempus non dui. Nam rhoncus ultricies orci, at mollis nisi hendrerit in.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image6"><img src="http://ecx.images-amazon.com/images/I/01XN2e1vvNL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header8">407736 Type 2 Sound Level Meter with Calibration Check</div></h5> <div id="text8" class="a-spacing-small"><p>Sound Level Meter measures in 2 ranges from 35 to 130 dB with ±1.5 dB accuracy that meets ANSI and IEC Type 2 standards. It features a built-in 94 dB calibration check, fast/slow response time, A/C Weighting, Max Hold, and analog AC/DC output for connection to an analyzer or recorder. Comes with microphone windscreen, 9-volt battery, carrying case, and user manual. Model 407736-NIST is also available with a Certificate of Calibration traceable to NIST.</p></div> </div> <div class="break"></div> </div> read more

Extech
$32.32
at Sears

Detects AC Current (200mA to 1000A) through shielded wires, conduit, and metal circuit breaker or junction boxes. Sensitivity adju...stment with audible and visual indication. CAT III-600V. Complete with pocket clip and four LR44 batteries. Locates current in hidden wires and cables Non-contact AC Current range is from 200mA to 1000A Locates current flow even where voltage detectors cannot work Detects through shielded wires, conduit, and metal circuit breaker or junction boxes Sensitivity adjustment for locating wires/conduit through walls read more

Extech
$129.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../31tOCK1l3DL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Humidity and Temperature Datalogger</div></h5> <div id="text0" class="a-spacing-small"><p>The Extech RHT20 Humidity and Temperature USB Datalogger can records up to 16,000 Humidity and 16,000 Temperature readings with selectable sampling rates of 2s, 5s, 10s, 30s, 1min, 5min, 10min, 30min, 1hr, 2hr, 3hr, 6hr, 12hr and 24hr.</p></div> <h5><div id="header1">Additional Features</div></h5> <div id="text1" class="a-spacing-small"><p>Featuring user-programmable alarm thresholds for RH and Temperature, the RHT20 displays current temperature and humidity readings, Min/Max, and alarm status. It has a Humidity range of 0 to 100 percent RH, a Temperature range of -40 to 158 degrees F (-40 to 70 degrees C) and an accuracy of ±3 percent RH and ±1 degrees C/1.8 degrees F. USB connector easily plugs in to a PC for data analysis.</p></div> <h5><div id="header2">What's in the Box</div></h5> <div id="text2" class="a-spacing-small"><p>Comes with 3.6-volt lithium battery, a mounting bracket with combination lock, Windows compatible software, and user manual.</p></div> <div class="break"></div><br> <h4>More Extech Instruments to Choose From</h4> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/118wfeQLMkL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">RHT10 Humidity And Temperature USB Datalogger</div></h5> <div id="text3" class="a-spacing-small"><p>The RHT10 can record up to 32,000 readings (16,000 for each Humidity & Temperature parameter). The selectable data sampling rates are 2s, 5s, 10s, 30s, 1min, 5min, 10min, 30min, 1hr, 2hr, 3hr, 6hr, 12hr and 24hr. It has a user programmable alarm thresholds for RH and Temperature. It has a Humidity range of 0 to 100 percent RH, a Temperature range of -40 to 158 degrees F (-40 to 70 degrees C) and an accuracy of ±3 percent RH and ±1 degrees C/1.8 degrees F. This USB datalogger has a one year battery life and displays Dew Point temperature via the included Windows software. Comes with 3.6-volt lithium battery, a protective USB cap, mounting bracket, Windows compatible software for analysis, and user manual.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/11B0D7IMqfL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">42280 Temperature and Humidity Datalogger</div></h5> <div id="text4" class="a-spacing-small"><p>The 42280 is a wall-mount, tripod mount, or desktop indoor air quality monitor with an internal memory capable of storing 16,000 readings (8000 Temperature readings and 8000 Relative Humidity readings) that can later be transferred to PC using the USB interface. It can be programmed from the built-in keypad, or remotely from a PC, with selectable data sampling rate (1 second to 12 hours) and user programmable audible and visual high/low alarms for both Temperature (-4 to 144 degrees F /-20 to 70 degrees C) and Humidity (0 to 100 percent RH). The triple LCD displays Humidity, Temperature, and date (Year, Month, and Day). Comes complete with Windows compatible software, USB cable, universal AC adaptor, and four AA batteries. A built-in utility allows for self-calibration using the optional RH300-CAL calibration kit that includes 33 percent and 75 percent RH calibration bottles.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image3"><img src="http://ecx.images-amazon.com/images/I/01enrDphRcL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header5">RHT50 Humidity/Temperature/Atmospheric Pressure Datalogger</div></h5> <div id="text5" class="a-spacing-small"><p>Records Relative Humidity (0 to 100 percent RH), Temperature (-40 to 158 degrees F /-40 to 70 degrees C) and Atmospheric Pressure (13.7 to 15psi / 950 to 1050hPa / 95 to 105kPa / 0.9 to 1.0bar). Datalogs up to 10,000 readings with user programmable sample rate from 1 minute to 18 hours. USB interface for easy set-up and data download. Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar. User-programmable High/Low alarm thresholds. Manual and Programmable start modes. Status Indication via Red/Yellow LED and Green LED. Complete with 3.6-volt lithium battery, mounting bracket, and Windows compatible analysis software. Use 2 dataloggers to measure for positive/negative pressure between two rooms or indoors/outdoors.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img src="http://ecx.images-amazon.com/images/I/11A6BeLM+JL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header6">WB200 Hygro-Thermometer Datalogger</div></h5> <div id="text6" class="a-spacing-small"><p>Combines traditional dry/wet bulb operation (refillable water tank) with electronic circuitry to provide accurate readings and trouble-free operation especially in dusty environments. Built-in fan provides fast response time. Audible and visual alarm alerts when temperature and humidity level is higher or lower than the user programmed High/Low set points. Datalogger with user programmable sampling rate (15 to 60 minutes) stores 100 records that can easily be recalled on the display. Measures Wet Bulb, Dew Point, Temperature (41 degrees F to 122 degrees F /5 degrees C to 50 degrees C) and Relative Humidity (0.0 to 99.9 percent RH). Complete with four AAA batteries and 100-240V Universal AC adapter.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header7"></div></h5> <div id="text7" class="a-spacing-small"></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header8"></div></h5> <div id="text8" class="a-spacing-small"></div> </div> <div class="break"></div> </div> read more

Extech
$149.99
at Amazon

Durable housing is double molded. Easy to open alligator clips with wide jaws. Complete with cable and three large color coded all...igator clips, pouch case, and 9V battery. read more

Extech
$99.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../21ASJdLVvQL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Hygro-Thermometer Psychrometer</div></h5> <div id="text0" class="a-spacing-small"><p>The RH300 is a compact meter that is ideal for field applications. Simultaneously displays relative humidity (10 to 90 percent RH), air temperature (-4 to 122 degrees F /-20 to 50 degrees C) and dew point (-90.4 to 122 degrees F /-68.0 to 49. 9 degrees C) or wet bulb (-6.9 to 122 degrees F /-21.6 to 49.9 degrees C).</p></div> <h5><div id="header1">Additional Features</div></h5> <div id="text1" class="a-spacing-small"><p>Calculates T1-T2 differential (air temperature minus external probe temperature) using optional probe (TP890), and T2 minus dew point. Compact meter is well-suited for field applications. Unique sensor cap closes to protect to protect meter during storage. Advanced features include Data Hold, selectable Auto Power Off, and MAX/MIN/Average reading.</p></div> <h5><div id="header2">What's in the Box</div></h5> <div id="text2" class="a-spacing-small"><p>Comes with two AAA batteries and user manual. Model RH305 includes the RH300, TP890 external temperature probe, RH300-CAL calibration bottles, two AAA batteries, carrying case, and user manual.</p></div> <div class="break"></div><br> <h4>More Extech Instruments to Choose From</h4> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/11QKZOqXkJL.jpg" alt="" ><div class="imageCaption">RH305<br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">Hygro-Thermometer Psychrometer Kit</div></h5> <div id="text3" class="a-spacing-small"><p>Model RH300 Hygro-Thermometer Psychrometer can simultaneously display Relative Humidity (10 to 90 percent RH), air temperature (-4 to 122 degrees F /-20 to 50 degrees C) and dew point (-90.4 to 122 degrees F /-68.0 to 49. 9 degrees C) or wet bulb (-6.9 to 122 degrees F /-21.6 to 49.9 degrees C). Calculates T1-T2 differential (air temperature minus external probe temperature) using the included external probe (TP890), and T2 minus dew point. Compact meter is ideal for field applications. Unique sensor cap closes to protect to protect meter during storage. Advanced features include data hold, selectable auto power off and MAX/MIN/Average reading. A built-in utility allows for field calibrations using the included RH300-CAL kit with 33 percent and 75 percent RH calibration bottles. The kit come complete with Model RH300, TP890 external temperature probe, RH300-CAL calibration bottles, two AAA batteries, carrying case, and user manual.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/11NMpZIgNDL.jpg" alt="" ><div class="imageCaption">RH350<br>View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">Dual Input Hygro-Thermometer Psychrometer</div></h5> <div id="text4" class="a-spacing-small"><p>Displays Humidity (10 to 90 percent RH), Dew Point Point (-90.4 to 122 degrees F /-68.0 to 49. 9 degrees C), wet bulb (-6.9 to 122 degrees F /-21.6 to 49.9 degrees C), air temperature (-4 to 122 degrees F /-20 to 50 degrees C) and Type K Temperature (-328 to 2498 degrees F /-200 to 1370 degrees C). Triple backlit LCD can be changed to display Humidity and Air Temperature with either Dew Point, Wet Bulb or Type K Temperature. Differential function displays the temperature differences between T1- T2, Air-T1 and T1-Dew Point. Advanced features include built-in memory to store/recall up to 99 data points, Min/MAX/Average readings from the captured data, data hold and selectable auto power off. The built-in RS232 interface (optional RS232 cable 589250) uses 407752 software to download data to a PC for storage and further analysis. Includes two general-purpose Type K temperature bead probes, four AAA batteries, and user manual.</p></div> </div> <div class="break"></div> <div class="break"></div> </div> read more

Extech
$44.99
at Amazon

<div class="aplus"> <div class="two-third-col"> <div style="width: 250px;" class="leftImage"><div id="image0"><img alt="" src="htt...p://ecx.images-amazon.com/images/I/21HycdwAz0L.jpg" ></div></div> <h5><div id="header0">CAT-IV-Rated, 3-in-1 Pocket Multimeter</div></h5> <div id="text0" class="a-spacing-small"><p>Extech's DM220 is unrivaled in its combination of remarkable simplicity, multi-function versatility, pocket-friendly size, and robust CAT-IV overvoltage safety rating. The compact, autoranging Extech DM220 Digital Mini Multimeter is equipped with capabilities that are perfect for the electrical hobbyist, electronics tinkerer, or DIYer working on home improvement, automotive electrical, and A/V projects.</p></div> <h5><div id="header1">Functional Overview</div></h5> <div id="text1" class="a-spacing-small"><p>Use the DM220 to perform more in-depth testing on existing and new home wiring outlet and lighting circuits and troubleshoot appliances like refrigerators and dryers as well as electronic devices found around the home and garage. With its small size and integrated test leads, it's easy to have the DM220 handy wherever you are ? even in a shirt pocket. Keep it in the glove box for on the road repairs. Handy for quick testing, use it to measure AC/DC voltage (to 600 volts) and current (to 200 mA). Measure resistance, capacitance, frequency, and duty cycle. Test diodes and continuity. To avoid fussing with selecting the right measurement range when working on a variety of components from small electronics to main electrical sources, the meter automatically adjusts with autoranging. This is especially useful when taking measurements that straddle the boundaries of two ranges.</p></div> <h5><div id="header2">Other Features</div></h5> <div id="text2" class="a-spacing-small"><p>In addition to its electrical testing and flashlight functions, the DM220 adds even more value with a built-in non-contact voltage detector. You won't have to search for a voltage pen in order to quickly and safely check for voltage prior to attaching the multimeter's test leads to the device under test. A bright red LED alerts you to the presence of voltage whether the meter is on or off. And the built-in flashlight is great for looking into wall cavities, night-time roadside troubleshooting in or under a vehicle, or for illuminating dark basements, crawlspaces, and attics where lighting may be limited, unavailable or de-energized. In addition, the 4-digit, 4,000 count display is easy to read. Rarely seen in the pocket-meter category, the DM200 is backed by a CATIV 600-volt (CATIII 1000-volt) overvoltage safety rating, protecting users even on devices connected to mains/voltage distribution lines. Ultra-compact and ergonomically designed, the DM220 has a double-molded housing with storage clips to retain the integrated silicone test leads that stay pliable even when left in a service vehicle during the cold winter months. Buttons are sealed, membrane-style, to ensure dust-proof, trouble-free functioning. The DM220 measures 4.72 x 2.2 x 1.6 inches (HxWxD), weighs only 5 ounces, and comes with integrated silicone test leads, two AAA batteries, user manual, and one-year limited warranty.</p></div> <div class="break"> </div> <br> </div><div class="third-col last"> <h5><div id="header3">Applications</div></h5> <div id="list0"><ul id="list0inner"><li>Electrical repair</li><li>Appliance repair</li><li>Home wiring projects</li><li>Testing electrical systems on cars and boats</li><li>Hobby projects</li></ul></div> </div><div class="break"></div></div> read more

Extech
$769.00
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 320px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../31v-WzJToiL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Appliance Tester/Power Analyzer</div></h5> <div id="text0" class="a-spacing-small"><p>Model 380803 Appliance Tester/Power Analyzer is a compact battery operated device for analyzing AC power loads. Plug the device to be tested directly into the Power Analyzer. It will provide four simultaneous displays of Watts (200, 2000W), Power Factor (0 to 1.00), Voltage (200, 750V) or Frequency (40Hz to 20kHz), and Current (20A/terminals, 15A/sockets).</p></div> <br> <h5><div id="header1">Applications</div></h5> <div id="list0"><ul id="list0inner"><li>Measure and Audit power consumption of single-phase devices </li><li>Evaluate load performance under varying line conditions </li><li>Demonstrate effectiveness of power conservation efforts </li><li>Characterize device AC power requirements</li></ul></div> <div class="leftImage" style="width: 320px;"> </div> <h5><div id="header2">Other Features</div></h5> <div id="text1" class="a-spacing-small"><p>This device has a built-in datalogger that stores up to 1,012 readings (single record or continuous) that can be downloaded to a PC for further analysis using the included software and cable. Additional features include Data Hold, Max Hold, and overload protection. Battery or AC adapter operation provides line isolation.</p></div> <div id="text2" class="a-spacing-small"></div> <h5><div id="header3">Includes</div></h5> <div id="text3" class="a-spacing-small"><p>Comes complete with Windows compatible software, cable, eight AA batteries, power cord, AC Adaptor, case, and user manual. Also available with a NIST Certificate of Calibration (Model 380803-NIST).</p></div> <div id="text4" class="a-spacing-small"></div> <div class="break"></div> </div> read more

Extech
$129.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 320px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../31MIItWXYbL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Wireless AC Circuit Identifier</div></h5> <div id="text0" class="a-spacing-small"><p>A must-have tool for electricians, do-it-yourselfers, contractors, kitchen, bath and lighting installers, and handymen, the Extech RT32 Wireless Remote AC Circuit Identifier enables you to identify circuit breakers, wiring, switched lines, AC outlets, and light fixtures without cutting into any wires ? and without a helper.</p></div> <h5><div id="header1">Features Overview</div></h5> <div id="list0"><ul id="list0inner"><li>Easily identify the correct circuit powering the cable to be spliced or repaired</li><li>Eliminates the need for an assistant or back-and-forth trips for confirmation</li><li>Built-in light sensor can identify remote lighting circuits</li></ul></div> <div class="rightImage" style="width: 320px;"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/31tjtuOa0JL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header2">Specific Features</div></h5> <div id="text1" class="a-spacing-small"><p>This versatile tool uses a pager-sized, non-contact voltage detector transmitter that clamps onto wiring mid-run and transmits a "voltage present" signal to a pocket-sized receiver carried by the user. Clamped onto a live wire, the transmitter signals the user at the breaker panel with LED and audible alerts on the receiver (up to 100-meter range). The alerts stop when the correct circuit breaker is switched and work can then be performed safely. The RT32 wirelessly identifies the correct circuit breaker controlling remote mid run AC wiring (using the included non-contact transmitter); lighting circuits (using the included built in light sensor), and AC outlets (using the included AC outlet extender).</p></div> <div id="text2" class="a-spacing-small"><p>A compact external clamp-style non-contact voltage (NCV) probe can be used for wires that are hard-to-reach, or within a bundle. For inaccessible circuit wiring, a useful lighting circuit identification function uses a light sensor to indicate lighting changes in a room caused by the user remotely opening a circuit breaker and turning off a light on the circuit. An optional AC outlet extender can also be used to identify circuits by outlets.</p></div> <h5><div id="header3">Includes</div></h5> <div id="text3" class="a-spacing-small"><p>Comes with one-year limited warranty, four AAA batteries, remote clamp probe, pouch case, and user manual.</p></div> <div id="text4" class="a-spacing-small"></div> <div class="break"></div> </div> read more

Extech
$39.99
at Amazon

<div class="aplus"> <div class="two-third-col"> <div style="width: 250px;" class="leftImage"><div id="image0"><img alt="" src="htt...p://ecx.images-amazon.com/images/I/31krLo+e2AL.jpg" ></div></div> <h5><div id="header0">Autoranging Ultra-Compact Pocket Multimeter</div></h5> <div id="text0" class="a-spacing-small"><p>Extech's DM110 offers full-function versatility and the most pocket-friendly multimeter size available. The compact, autoranging Extech DM110 Digital Mini Multimeter is equipped with capabilities that are perfect for a electrical hobbyist, electronics tinkerer, or DIYer.</p></div> <h5><div id="header1">Applications</div></h5> <div id="text1" class="a-spacing-small"><p>Use this meter to perform more in-depth testing to troubleshoot anything connected to an outlet, like refrigerators, dryers, and other appliances, as well as electronic devices found around the home and garage. The DM110 is great for automotive and marine electrical, A/V projects, Arduino projects, and secondary home wiring systems like security alarm and thermostat circuits. With its small size, half-inch thickness, and integrated test leads, it's easy to have the DM110 handy wherever you are ? even in a shirt pocket. Keep it in the glove box for on the road diagnostics. Handy for quick testing with an easy to read 4-digit, 4,000 count display, use it to measure AC/DC voltage (to 500 volts) and current (to 400 mA). Measure resistance, capacitance, frequency, and duty cycle. Test diodes and easily check for continuity in a circuit or component.</p></div> <h5><div id="header2">Autoranging Convenience</div></h5> <div id="text2" class="a-spacing-small"><p>To avoid fussing with selecting the right measurement range when working on a variety of components from small electronics to main electrical sources, the meter automatically adjusts with autoranging. This is especially useful when taking measurements that straddle the boundaries of two ranges. Plus, you can lock a reading on the display with the Data Hold button or take Relative readings as well. Ultra-compact and ergonomically designed, the DM110 includes a protective rubber holster with storage clips to retain the integrated test leads, soft carrying case, CR2032 button battery, user manual, and one-year limited warranty.</p></div> <div class="break"> </div> <br> </div><div class="third-col last"> <h5><div id="header3">Key Features</div></h5> <div id="list0"><ul id="list0inner"><li>Autoranging multimeter </li><li>Measures AC and DC voltage to 500 volts</li><li>Pocket-sized: 1/2-inch width and 1.7-ounce weight</li></ul></div> </div><div class="break"></div></div> read more

Extech
$39.99
at Amazon

The Extech Instruments circuit breaker finder makes identifying the right circuit easy. Simply plug sender unit into an outlet and... use receiver to identify breaker. Lights Up Yes, Works With Standard outlets, UL Listed Yes, Common Usage Breaker finder/outlet tester, Includes qty. 1 Breaker finder, Single, Pair, or Set Single, Adjustable Yes. Makes identifying the right circuit easy Simply plug sender unit into an outlet and use receiver to identify breaker Sender unit also works as an outlet tester with indicator lights for checking wiring and a push button for testing GFCI outlets Comes complete with 9V battery read more

Extech
$209.99
at Amazon

<div class="aplus"> <div style="width: 350px;" class="leftImage"> <div id="image0"><img alt="" src="http://ecx.images-amazon.com/i...mages/I/21QcmPovn3L.jpg" ></div> </div> <h5><div id="header0">Photo Tachometer</div></h5> <div id="text0" class="a-spacing-small"><p>Make non-contact RPM measurements (5 to 99,999 rpm) of rotating objects by pointing the integral light beam (6 inch target distance) at the reflective tape placed on the object to be measured. The memory button holds last reading and recalls min/max readings display.</p></div> <h5><div id="header1">What's in the Box</div></h5> <div id="text1" class="a-spacing-small"><p>Comes with four AA batteries, 23 inches (0.6 meter) reflective tape, carrying case, and user manual.</p></div> <h5><div id="header2">Accessories</div></h5> <div id="text2" class="a-spacing-small"><p>Reflective Tape for Photo Tachometers (461937) for use with any brand photo tachometer. Place a piece of reflective tape on the object to be measured and point the tachometer's integral light beam at it. Ten reflective tape strips. Each strip measures 23 x 0.25 inches (584 x 6 mm).</p></div> <h5><div id="header4">What is a Tachometer?</div></h5> <div id="text4" class="a-spacing-small"><p>A tachometer is a device that measures the angular speed of a rotating shaft in terms of revolutions per minute (RPM). Also, a tachometer can measure linear speed in terms of feet per minute (feet/minute) or meters per minute.</p></div> <h5><div id="header7">How do Contact Tachometers Operate?</div></h5> <div id="text7" class="a-spacing-small"><p>The sensor tip is placed in direct contact with the rotating object. After 2 seconds an accurate reading is displayed. Linear surface speed can also be measured by placing the edge of the wheel on the moving object.</p></div> <div class="break"></div><br> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header7">How do Photo (Non-contact) Tachometers Operate?</div></h5> <div id="text7" class="a-spacing-small"><p>First, a small piece of reflective tape (approximately 1/4-inch) is mounted on the object to be measured. Second, the light beam or laser is pointed at the revolving tape. The reflection from the tape provides a reading to be displayed and updated once per second. For the most accurate measurements, the distance between the tachometer and the reflective tape should be within 6 inches for a light beam and up to 6.5 feet for a laser. Fluorescent or bright ambient lights may interfere with the measurement.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img alt="" src="http://ecx.images-amazon.com/images/I/11OVS5-RVuL.jpg" ></div> </div> </div> <div class="third-col last"> <h5><div id="header6">Which Extech Tachometer Model Is the One for You?</div></h5> <div id="text6" class="a-spacing-small"><p>A non-contact (photo) tachometer was designed for applications where it is not feasible to have the tachometer come in contact with the rotating device. This is the case in high-speed applications and/or where the object to be measured is not easily reached. A contact tachometer is also available for applications where direct contact of the tachometer with the object is preferred. You can also select a combination (contact/non-contact) tachometer for the maximum in flexibility.</p></div> </div> <div class="break"></div> <h4>More Extech Instruments to Choose From</h4> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img alt="" src="http://ecx.images-amazon.com/images/I/11fFDUtJTxL.jpg" ><div class="imageCaption">461891</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">Contact Tachometer</div></h5> <div id="text3" class="a-spacing-small"><p>Surface wheels measure contact surface speeds (10 to 9,999 rpm) of rotating objects. The memory button holds last reading and recalls min/max readings display. Complete with wheels for linear surface speed (0.2 to 6560 feet/minute; 0.05 to 1999.9 meters/minute) or RPM measurements, four AA batteries, and carrying case. Also available: Replacement Wheels for Contact Tachometer (461990) include Two sets of cone tip, flat tip, and spare wheel.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header8"></div></h5> <div id="text8" class="a-spacing-small"></div> </div> <div class="break"></div> </div> read more

Extech
$209.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 320px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../21NlT5G5suL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Heavy Duty Light Meter</div></h5> <div id="text0" class="a-spacing-small"><p>The HD400 is a rugged light meter that measures a wide range to 4,000 Fc or 40,000 Lux using a precision silicon photo diode and spectral response filter with cosine and color corrected measurements. Peak mode (10 mS) captures highest reading, and Relative mode indicates change in light levels.</p></div> <br> <h5><div id="header1">Applications</div></h5> <div id="list0"><ul id="list0inner"><li>OSHA compliance for workplace lighting</li><li>Adequate indoor lighting in stairwells</li><li>Schools and other exam/testing areas</li><li>Medical examination and surgical procedure areas</li><li>University campuses, parking garages, and public areas</li><li>Security lighting and ATM locations</li><li>Computer and clean room lighting</li><li>Photography, film, and videography</li><li>Antiques, museum exhibits, and artwork</li></ul></div> <div class="break"></div> <div class="leftImage" style="width: 320px;"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/21utvvTojjL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header2">Additional Features</div></h5> <div id="text1" class="a-spacing-small"><p>Backlit LCD display with 40-segment bar graph; peak mode (10 mS) captures the highest reading; relative mode indicates change in light levels; minimum/maximum; data hold; low battery indicator; and a built-in USB port for real-time monitoring and storage of light level data on a PC.</p></div> <div id="text2" class="a-spacing-small"></div> <h5><div id="header3">What Is a Light Meter?</div></h5> <div id="text3" class="a-spacing-small"><p>A light meter measures the amount of visible light, also known as illumination, in a given area. For many meter brands, including Extech, illumination is expressed in units of measure called Lux (for metric) and foot-candles (used in the US). To use an Extech light meter, the sensor is placed on a tabletop or other surface in the area to be measured and the light level reading is indicated on the meter's display.</p></div> <div id="text4" class="a-spacing-small"><p>There are many different types of lighting that can be measured. the most common are: sodium, tungsten, mercury, and fluorescent. The following list shows common applications for each lighting type.</p><ul><li>Sodium lighting: Highway, parking lots, security measurements</li><li>Tungsten lighting: Sunlight and incandescent lighting measurements</li><li>Mercury lighting: Highways, parking lots, stadiums</li><li>Fluorescent lighting: Indoor lighting for workstations and store display areas</li></ul></div> <div class="break"></div> </div> read more

Extech
$74.99
at Amazon

<div class="aplus"> <div class="two-third-col"> <div style="width: 300px;" class="leftImage"> <div id="image0"><img alt="" src="ht...tp://ecx.images-amazon.com/images/I/316poGgR8BL.jpg" ><div class="imageCaption">Performs 11 basic and advanced measurements with ±0.3 percent basic accuracy. </div></div> </div> <h5><div id="header0">11-Function Auto-Ranging Multimeter</div></h5> <div id="text0" class="a-spacing-small"><p>The Extech EX420 is a compact, 11-function autoranging digital multimeter. The EX420 measures AC/DC voltage and current, resistance, diode, continuity, and frequency, all with ±0. 3 percent basic accuracy. The EX420 can also capture Type K temperature readings. These numerous functions enable professionals to carry one meter into the field instead of several.</p></div> <h5><div id="header1">Features Overview</div></h5> <div id="text1" class="a-spacing-small"><p>Featuring a large, backlit LCD screen (4,000-count) with easy-to-read, 1-inch-tall digits, the EX420 provides high resolution over wide ranges, low current measuring down to 0.1 uA, as well as input fuse protection and misconnection warnings. The meter's other functions include Data Hold to freeze on-screen readings, and Auto Power Off to conserve battery life. A Type K thermometer is built in for contact temperature measurements</p></div> <h5><div id="header2">Includes</div></h5> <div id="text2" class="a-spacing-small"><p>EX420 digital multimeter, CAT III test leads, multi-position tilt stand, Velcro hanging strap, holster with built-in test lead storage, Type K bead wire temperature probe, 9-volt battery, and user manual. The EX420 includes a one-year limited warranty.</p></div> <h5><div id="header3"></div></h5> <div id="text3" class="a-spacing-small"></div> <h5><div id="header4"></div></h5> <div id="text4" class="a-spacing-small"></div> </div> <div class="third-col last"> <div style="width: 300px;" class="leftImage"> </div> <div class="break"> </div> <h5><div id="header5"></div></h5> <div id="text5" class="a-spacing-small"></div> <br> <h5><div id="header6">Features & Benefits Overview</div></h5> <div id="list0"><ul id="list0inner"><li>Accurately performs 11 basic and advanced measurements</li><li>Lightweight and ergonomically designed for comfortable one-handed operation</li><li>Large, high-contrast LED display with 1-inch numbers is easy to read</li><li>Type K bead wire temperature probe for surface or air measurements</li><li>One-year limited warranty on parts and labor</li></ul></div> </div> </div> read more

Extech
$74.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 250px;"><div id="image0"><img src="http://ecx.images-amazon.com/images/I/...21WIcgcaD-L.jpg" alt="" ><div class="imageCaption">View larger</div></div></div> <div class="rightImage" style="width: 250px;"></div> <h5><div id="header0">Multifunction Voltage Tester</div></h5> <div id="text0" class="a-spacing-small"><p>This voltage/continuity tester and flashlight is designed in a double-molded IP64 housing with large backlit LCD display and bargraph.</p></div> <h5><div id="header1">Additional Features</div></h5> <div id="text1" class="a-spacing-small"> <ul> <li>AC/DC voltage indication (0 to 480 VAC /0 to 690 VDC) with DC polarity</li> <li>Phase rotation test</li> <li>Low impedance test for eliminating ghost voltages</li> <li>CAT IV-600V</li> <li>CE approved</li></ul></div> <h5><div id="header2">What's in the Box</div></h5> <div id="text2" class="a-spacing-small"><p>Comes with two AAA batteries, protective cap, pouch case, and user manual.</p></div> <div class="break"> </div> <br> <h5><div id="header3"></div></h5> <div id="list0"></div> </div> read more

Extech
$109.99
at Amazon

Compact case features push button output selector switch. Dimensions:3.5x2.3x1" (89x58.4x25.4mm). Weight: 10oz (283.5g).

Extech
$49.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../21khQBSchIL.jpg" alt="" ><div class="imageCaption">View larger<br><br></div></div> </div> <h5><div id="header0">NCV Voltage Detector + IR Thermometer</div></h5> <div id="text0" class="a-spacing-small"><p>Quickly check for the presence of live wires before testing. Suitable for outlets or against wire insulation testing. Model DV40 combines a CAT III-1000V Voltage Detector (with a wide range from 50 to 1000V) with an Infrared Thermometer that measures and displays non-contact surface temperatures on the built-in LCD screen using a from -20 to 445 degrees F (-30 to 230 degrees C). 1:1 distance to target ratio and fixed 0.95 emissivity covers 90 percent of surface applications.</p></div> <h5><div id="header1">What's in the Box</div></h5> <div id="text1" class="a-spacing-small"><p>Three LR44 batteries and user guide.</p></div> <h5><div id="header2">Applications</div></h5> <div id="text2" class="a-spacing-small"><p>Applications include: Electrical Troubleshooting, Plant/FM Maintenance, Building Inspections, HVAC/R Repairs, and Field Service.</p></div> <div class="break"></div><br> <h4>More Extech Instruments to Choose From</h4> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/01jikfNOEQL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">DV20 Non-Contact Voltage Detector + Flashlight</div></h5> <div id="text3" class="a-spacing-small"><p>The DV20 is a pocket-size, CAT IV-rated non-contact voltage detector designed for quick voltage checks on live wires before testing. Other features of this detector is its LED flashlight for illuminating dimly lit areas, rugged double molded housing, and CAT IV-1000V safety rating. Designed for use on 50/60 Hz circuits. Includes two AAA batteries.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/01PP+3ATYlL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">DV24 Wide Range NCV Detector + Flashlight</div></h5> <div id="text4" class="a-spacing-small"><p>The DV24 provides fast, non-contact detection of AC Voltage from 50 to 1000VAC using Red LED indicator to indicate the presence of voltage. Slim tip fits into outlet receptacles or against wire insulation testing. CAT IV-1000V safety rating. Includes two AAA batteries.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image3"><img src="http://ecx.images-amazon.com/images/I/01SaNxIpEqL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header5">DV25 Dual Range AC Voltage Detector</div></h5> <div id="text5" class="a-spacing-small"><p>Quickly check for the presence of live wires before testing. Suitable for outlets or against wire insulation testing, this pocket-sized dual range Non-Contact Voltage detector combines two models in one. Low range measures down to 24V and the high range measures up to 1000V. Additional features include: CAT IV-1000V safety rating, audible and visual indication, rugged double molded housing, and a bright built-in LED flashlight. For use on 50/60 Hz circuits. Complete with two AAA batteries.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img src="http://ecx.images-amazon.com/images/I/01kzemLh7-L.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header6">DV26 CAT IV Non-Contact Voltage Detector + Flashlight</div></h5> <div id="text6" class="a-spacing-small"><p>Quickly check for the presence of live wires before testing. Suitable for outlets or against wire insulation testing. Green LED lights when powered on and ready to use indicates that battery is good. Flashing Red LED with audible beeper indicates presence of live wires. 100 to 1000VAC, 50/60 Hz range. Built-in bright LED flashlight and CAT IV-600V safety rating. Includes two AAA batteries.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header7"></div></h5> <div id="text7" class="a-spacing-small"></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header8"></div></h5> <div id="text8" class="a-spacing-small"></div> </div> <div class="break"></div> </div> read more

Extech
$349.99
at Amazon

Use this Extech Video Borescope/Wireless Inspection Camera to inspect hard-to-reach areas and view remotely from a safe distance u...p to 32 feet on the detachable wireless 3.5in. color display. Camera has 4 bright LED lamps with dimmer to help you see objects in dark areas and provides a glare-free close-up field of view. Video and images can be saved on SD card and played back on wireless monitor or PC. Battery Type AA, Case Included Yes, Battery Included Yes, Monitor Type 3 1/2 in. color monitor, Includes Menus in 10 languages English, Chinese, German, French, Spanish, Portuguese, Italian, Japanese, Dutch, and Russian, Light Type 4 Bright LED lamps, Water Resistant Yes, the probe only, Probe in. 39, Head Size in. 3/8, Dimensions L x W x H in. 3 7/8 x 1 x 2 11/16. Wireless 3.5in. color monitor can be viewed from remote location up to 32ft. away from inspection site Saved video and images can be viewed on your PC via SD card or USB cable, using Windows Media Player Multilingual menus read more

Extech
$209.99
at Amazon

<div class="aplus"> <h5><div id="header0">Comprehensive Tools You Need for Industrial, Electrical & HVAC Predictive Maintenance</d...iv></h5> <div id="text0" class="a-spacing-small"><p>To maximize uptime, you need tools that help you effectively maintain the efficiency and performance of your plant's equipment ? electrical/electronic as well as heating/cooling. Extech's TK430-IR Kit equips you with four versatile tools that can help you find problems before they shut down a production line, affect food quality in the cold chain, or disable air conditioning in a commercial building.</p></div> <div class="two-third-col"> <div style="width: 300px;" class="leftImage"> <div id="image0"><img alt="" src="http://ecx.images-amazon.com/images/I/315O1LmfBIL.jpg" ></div> </div> <div style="width: 300px;" class="leftImage"> <div id="image1"><img alt="" src="http://ecx.images-amazon.com/images/I/21AbENCkstL.jpg" ><div class="imageCaption">MA200</div></div> </div> <h5><div id="header1">EX430 True RMS digital multimeter</div></h5> <div id="text1" class="a-spacing-small"><p>Compact and powerful, the Extech EX430 11-Function True RMS Pro MultiMeter provides the versatility of multiple meters in one convenient device. The EX430 measures AC/DC voltage and current, resistance, frequency, and temperature along with testing for diodes and continuity. Autoranging functionality provides ease of use, large backlit display with 1-inch high digits allow for easy reading, and the ergonomically designed housing offers comfortable, one-handed operation.</p></div> <h5><div id="header2">MA200 400 amp Clamp Meter</div></h5> <div id="text2" class="a-spacing-small"><p>The perfect complement to the EX430, the MA200 features a 400 amp AC rating and an ample 0.9-inch (23mm) jaw opening that can accommodate conductors up to 300 MCM. The 4-digit (2,000-count) readout is easy to read and you can operate the meter with one hand using the thumb-dial selector that is ergonomically placed off to the side. You can select auto- or manual-ranging, and besides current readings you can measure voltage, resistance and perform diode and continuity tests.</p></div> <h5><div id="header3">42510 Infrared Thermometer</div></h5> <div id="text3" class="a-spacing-small"><p>In addition to being able to take temperature measurements using the EX430's Type K wire probe, the kit's 42510 Infrared Thermometer lets you make safe, point-and-shoot, non-contact temperature measurements. The 42510 features a useful 8:1 distance ratio, which means that at a safe distance of 8 inches you are getting a temperature reading focused on a tight, one-inch spot. The 42510 not only ensures technicians can perform all essential electrical diagnostics, the IR makes it easy to identify overheating motors, stressed bearings, overloaded electrical panels, abnormal vent temperatures, and other components from a distance with point-and-shoot laser accuracy. The compact IR thermometer has broad troubleshooting applications with its wide temperature range from -58 to 1000 degrees F.</p></div> <h5><div id="header4">40130 NCV Detector</div></h5> <div id="text4" class="a-spacing-small"><p>The test kit adds value with the included non-contact voltage detector. Use this compact pen-style voltage detector before you start any job. Suitable for many industrial applications with its 100-volt to 600-volt AC range, you can quickly and conveniently check for AC voltage prior to attaching your multimeter's test leads to the device under test. When testing connections, terminations, outlets or near wire insulation with live voltage, a bright red LED flashes to illuminate the tip along with an audible beep that can be disabled. Backed by a one-year limited warranty, the TK430-IR kit comes with two sets of CAT-III test leads and Type K thermocouple bead probes, 9-volt batteries, and a custom carrying case.</p></div> </div> <div class="third-col last"> <div style="width: 300px;" class="leftImage"> <div id="image2"><img alt="" src="http://ecx.images-amazon.com/images/I/21HiTjKXKWL.jpg" ><div class="imageCaption">42510</div></div> </div> <div class="break"> </div> <h5><div id="header5"></div></h5> <div id="text5" class="a-spacing-small"></div> <br> <h5><div id="header6">The TK430-IR Kit includes:</div></h5> <div id="list0"><ul id="list0inner"><li>EX430 True RMS, autoranging multimeter with 11 functions</li><li>MA200 400 amp clamp meter with basic AC Current and 1mA resolution</li><li>42510 IR Thermometer (-58 to 1000 degrees F/-50 to 538 degrees C) with laser pointer</li><li>40130 Non-contact voltage (NCV) detector with 100V to 600-volt AC range</li></ul></div> </div> </div> read more

Extech
$249.99
at Amazon

The Etch carbon monoxide meter measures CO levels from 0 to 1000ppm. Common Usage: Measures CO levels from 0 to 1000ppm., Senses: ...0 - 1000 PPM, Batteries Required: Yes, Battery Included: Yes, Includes: 1 Meter, 1 Battery, 1 Protective Holster, and 1 Carrying Case. read more

Extech
$159.99
at Amazon

This special value Electrical Test Kit is assembled with True RMS Meters to provide all the electrical testing needs for installat...ion and repair of electrical systems, HVAC equipment and large appliances, plus AC/DC Clamp Meter for automotive and motor applications. read more

Extech
$84.99
at Amazon

<div class="aplus"> <div class="two-third-col"> <div style="width: 250px;" class="leftImage"><div id="image0"><img alt="" src="htt...p://ecx.images-amazon.com/images/I/219n5fG3XNL.jpg" ></div></div> <div style="width: 250px;" class="rightImage"></div> <h5><div id="header0">400 Amp AC Clamp Meter</div></h5> <div id="text0" class="a-spacing-small"><p>The compact Extech MA200 is a useful general purpose AC clamp meter for plant maintenance technicians, electrical troubleshooters, and DIYers. The 4-digit (2,000-count) readout is easy to read and you can operate the meter with one hand, having a thumb-dial selector that is ergonomically placed off the side of the meter. You can select auto- or manual-ranging and measurement functions in addition to current include: voltage and resistance as well as diode and continuity tests.</p></div> <h5><div id="header1">Ergonomic & Versatile</div></h5> <div id="text1" class="a-spacing-small"><p>The affordable clamp meter is compact and easy to hold. Whether you are performing amp readings in a heavy duty industrial setting or doing commercial electrical work, the 400 amp AC rating and ample 0.9-inch (23mm) jaw opening is compact enough to fit in tight locations but can also accommodate bigger jobs, swallowing conductors up to 300 MCM. For better diagnostics and troubleshooting, you can use one of two one-button functions: press HOLD to freeze a reading on the LCD; MAX tracks and displays maximum values (useful for blind measurements and start-up draw).</p></div> <h5><div id="header2">Other Features</div></h5> <div id="text2" class="a-spacing-small"><p>CAT III-rated, the MA200 measures 7.9 x 2 x 1.4-inches (HxWxD) and comes with test leads, two AAA batteries, carrying case, user manual, and one-year limited warranty. NIST certification is also available.</p></div> <div class="break"> </div> <br> </div><div class="third-col last"> <h5><div id="header3">Features Overview</div></h5> <div id="list0"><ul id="list0inner"><li>Autoranging</li><li>Hold, Max data functions</li><li>Compact ergonomic form factor</li><li>0.9-inch (23mm) jaw opening</li></ul></div></div><div class="break"></div> </div> read more

Extech
$69.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../31AEfFJy6nL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Mini Laser IR Thermometer</div></h5> <div id="text0" class="a-spacing-small"><p>Compact thermometer measures temperature from -4 to 630°F (-20 to 332°C) with 0.1° resolution. Fixed 0.95 emissivity covers 90% of surface applications.</p></div> <h5><div id="header1">Additional Features</div></h5> <div id="text1" class="a-spacing-small"><p>Built-in laser pointer identifies target area. Min/Max feature displays the highest and lowest readings taken over time. Backlighting illuminates display for taking measurements at night or in areas with low background light levels. Automatic Data Hold when the trigger is released and Auto power off.</p></div> <h5><div id="header2">Includes</div></h5> <div id="text2" class="a-spacing-small"><p>Comes with 9V battery, carrying case, and user manual.</p></div> <div class="break"></div><br> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/11hdzKrY9tL.jpg" alt="" ><div class="imageCaption">42515<br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">1472°F (800°C) 13:1 Laser IR Thermometer with Type K Input</div></h5> <div id="text3" class="a-spacing-small"><p>Infrared Thermometer measures from -58 to 1472°F (-50 to 800°C) and has a Type K input and memory to store up to 20 readings. It features adjustable high/low visual and audible alarms and MAX/MIN/AVG/DIF measurement that displays the highest, lowest, average, and MAX minus MIN values. It has a large backlit LCD display for easily reading measurements and programming parameters. Adjustable emissivity increases measurement accuracy for different surfaces. The built-in laser pointer improves aim. Data Hold, Auto Power Off, and Low Battery Indication. Complete with 9V battery, Type K bead wire probe, and soft case.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/11w-pYYD-SL.jpg" alt="" ><div class="imageCaption">42515-T<br>View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">1472°F (800°C) 13:1 Laser IR Thermometer with Type K Input and Pipe Clamp</div></h5> <div id="text4" class="a-spacing-small"><p>Includes the 4215 IR Thermometer and a TP200 pipe clamp temperature probe (-4 to 200°F/ -20 to 93°C) with a spring-loaded jaw for secure grip on pipes from 0.25? (6.35mm) to 1.5? (38mm) diameter. The 42515 Infrared Thermometer measures from -58 to 1472°F (-50 to 800°C) and has a Type K input and memory to store up to 20 readings. It features adjustable high/low visual and audible alarms and MAX/MIN/AVG/DIF measurement that displays the highest, lowest, average, and MAX minus MIN values. It has a large backlit LCD display for easily reading measurements and programming parameters. Adjustable emissivity increases measurement accuracy for different surfaces. The built-in laser pointer improves aim. Data Hold, Auto Power Off, and Low Battery Indication. Complete with 9V battery, TP200 Pipe Clamp, Type K bead wire probe, and soft case.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image3"><img src="http://ecx.images-amazon.com/images/I/116GHe4deEL.jpg" alt="" ><div class="imageCaption">42510<br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header5">1000°F (538°C) 8:1 Compact Laser IR Thermometer</div></h5> <div id="text5" class="a-spacing-small"><p>Compact thermometer measures temperature from -58 to 1000°F (-50 to 538°C) with 0.1° resolution for readings up to 999.9°. Fixed 0.95 emissivity covers 90% of surface applications. Built-in laser pointer identifies target area. Backlighting illuminates display for taking measurements at night or in areas with low background light levels. Automatic Data Hold when the trigger is released and Auto power off. Complete with 9V battery and carrying case.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img src="http://ecx.images-amazon.com/images/I/11ZldgasD2L.jpg" alt="" ><div class="imageCaption">42500<br>View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header6">500°F (260°C) 6:1 Compact Laser IR Thermometer</div></h5> <div id="text6" class="a-spacing-small"><p>Compact thermometer measures temperature from -4 to 500°F (-20 to 260°C) with 1° resolution. Fixed 0.95 emissivity covers 90% of surface applications. Built-in laser pointer identifies target area. Backlighting illuminates display for taking measurements at night or in areas with low background light levels. Automatic Data Hold when the trigger is released and Auto power off. Complete with 9V battery and carrying case.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header7"></div></h5> <div id="text7" class="a-spacing-small"></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header8"></div></h5> <div id="text8" class="a-spacing-small"></div> </div> <div class="break"></div> </div> read more

Extech
$419.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../414GSkkHGCL.jpg" alt="" ></div> </div> <h5><div id="header0">Combination Pin/Pinless Moisture Meter with Remote Probe</div></h5> <div id="text0" class="a-spacing-small"><p>Monitor moisture in wood and other building material with virtually no surface damage. It features percentage WME (wood moisture equivalent) pin moisture reading (6.0 to 94.8 percent) and Relative pinless moisture reading for non-invasive measurement (0 to 99.9) with a measurement depth to 0.75-inch (22mm) below material surfaces.</p></div> <h5><div id="header1">Additional Features</div></h5> <div id="text1" class="a-spacing-small"><p>A remote pin probe is also included to measure moisture in hard-to-reach areas. Other features include a digital, backlit LCD readout and tri-color LED bar graph, and built-in calibration check. Cap protects pins during storage and can be snapped on to the side of the housing during use.</p></div> <h5><div id="header2">What's in the Box</div></h5> <div id="text2" class="a-spacing-small"><p>Comes with 9-volt Battery, replacement pins (MO200-PINS), protective cap, remote pin probe (MO-P1), pouch case, and user manual.</p></div> <div class="break"></div> <br> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/114yymXzHwL.jpg" alt="" ><div class="imageCaption">MO260 <br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">Combination Pin/Pinless Moisture Meter</div></h5> <div id="text3" class="a-spacing-small"><p>Monitor moisture in wood and other building material with virtually no surface damage. It features percentage WME (wood moisture equivalent) pin moisture reading (6.0 to 94.8 percent) and relative pinless moisture reading for non-invasive measurement (0 to 99.9) with a measurement depth to 0.75-inch (22mm) below the surface. It features a digital LCD with backlighting and tri-color LED bar graph, built-in calibration check, replaceable pins, and low battery indicator.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/11dyiCpwrHL.jpg" alt="" ><div class="imageCaption">MO260-RK <br>View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">Restoration Kit</div></h5> <div id="text4" class="a-spacing-small"><p>Provides a complete solution for the Restoration Contractor. Diagnose the amount of moisture content in buildings and measure accurate Humidity readings of ambient room conditions and GPP calculations. The kit includes Model MO260 Combination Pin/Pinless Moisture Meter and Model RH490 Precision Hygro-Thermometer that measures temperature, humidity, dew point, wet bulb, and mixing ratio in GPP (grains per pound/grains per kilogram). The kit is supplied in a hard carrying case that provides protection and organization for the meters and accessories whenever they are needed.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header5"></div></h5> <div id="text5" class="a-spacing-small"></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header6"></div></h5> <div id="text6" class="a-spacing-small"></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col"> <h5><div id="header7"></div></h5> <div id="text7" class="a-spacing-small"></div> </div> <div class="sixth-col"> <div class="centerImage"> </div> </div> <div class="third-col last"> <h5><div id="header8"></div></h5> <div id="text8" class="a-spacing-small"></div> </div> <div class="break"></div> </div> read more

Extech
$64.99
at Amazon

Handy battery operated pocket size (7.6in.L) moisture meter with adjustable pins to detect moisture in wood and building materials.... 1 year limited warranty. read more

Extech
$33.49 $41.99
at Casa

Extech 445703 Big Digit Hygro-Thermometer w/ Min/Max 1 inch Digits on Super Large Dual Display Min/Max with reset function Humidit...y: 10 to 99%RH Temperature: 14 to 140 degrees F (-10 to 60 degrees C) Desktop or Wall Mount Need more information on this product? Click here to ask. Weight: 0.37lb read more

Extech
$99.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 320px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../31L8Zg80yNL.jpg" alt="" ></div> </div> <h5><div id="header0">Electrical Test Kit with AC Clamp Meter</div></h5> <div id="text0" class="a-spacing-small"><p>This special value Electrical Test Kit (model ETK30) is assembled to provide all the electrical testing needs for installation and repair of electrical systems and HVAC equipment. The ETK30 includes: an EX205T True RMS multimeter and MA430 400 amp AC clamp meter with a built-in non-contact voltage detector with LED alert. The ETK30 kit is supplied in an attractive storage case that provides protection and organization.</p></div> <br> <h5><div id="header1">Applications</div></h5> <div id="list0"><ul><li>Electrical troubleshooting </li><li>Mechanical diagnostics</li><li>HVAC installs/repair</li><li>Field service techs</li><li>Process control</li><li>Plant & predictive maintenance</li><li>QA/QC and R&D bench testing</li><li>True RMS for accurate readings on noisy circuits</li></ul></div> <div class="break"></div> <div class="rightImage" style="width: 300px;"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/21i39lrul+L.jpg" alt="" ><div class="imageCaption">EX205T</div></div> </div> <h5><div id="header2">EX205T Features Overview</div></h5> <div id="text1" class="a-spacing-small"><p>The Extech EX205T is a True RMS digital multimeter, which provides truer AC readings when measuring distorted or non-sinusoidal waveforms and noisy signals. This model is also autoranging, which means it automatically displays readings with the proper decimal place location and maximum resolution.</p></div> <div id="text2" class="a-spacing-small"><p>Featuring a large 2000-count, backlit dual LCD with easy-to-read digits, this multimeter measures: AC/DC voltage (600 volts); AC/DC current (10 amps with resolution to 0.1 ?A); resistance (20 M?); diode test; and continuity. Other features include input fuse protection, maximum hold, auto power off, data hold function, and a CAT III-600V safety rating. Iit includes test leads, 9-volt battery, and user manual.</p></div> <div class="break"> </div> <div class="rightImage" style="width: 300px;"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/21KNtTr05rL.jpg" alt="" ><div class="imageCaption">MS430</div></div> </div> <h5><div id="header3">MA430 Features Overview</div></h5> <div id="text3" class="a-spacing-small"><p>The MA430 clamp meter is compact and easy to hold while offering an ample 1.2-inch (30mm) jaw opening to accommodate conductors up to 350 MCM. Featuring a large, four-digit readout, the illuminated display is easy to see in poorly lit work areas, and the thumb-dial selector is convenient, one-hand operation.</p></div> <div id="text4" class="a-spacing-small"><p>Another safety feature built into the new MA430 series meters is the non-contact voltage (NCV) detector, which quickly identifies the presence of voltage on live wires and alerts the user with a red LED indicator. The MA430 measures: AC current, AC/DC voltage, resistance, diode test, continuity, and non-contact voltage detection. It includes test leads, 9-volt battery, and user manual.</p></div> <div class="break"></div> </div> read more

Extech
$39.99
at Amazon

<div class="aplus"> <h5><div id="header0">9 Function Mini MultiMeter + Non-Contact Voltage Detector</div></h5> <div id="text0" cla...ss="a-spacing-small"><p>The Extech EX310 is a manual-ranging DMM with NCV detector and battery test function. Featuring an extra-large 2,000-count display, the EX310 enables users to quickly and conveniently check for voltage prior to attaching the multimeter's test leads to the device under test. It offers 9 total functions, including AC/DC voltage to 600 volts, AC/DC current to 10 amps, resistance, diode testing and continuity testing. Plus, the battery test function lets users quickly check the condition of 1.5-volt and 9-volt batteries.</p></div> <div class="two-third-col"> <div style="width: 300px;" class="leftImage"> <div id="image0"><img alt="" src="http://ecx.images-amazon.com/images/I/312aUsqxvNL.jpg" ></div> </div> <div style="width: 300px;" class="leftImage"> </div> <h5><div id="header1">Features Overview</div></h5> <div id="text1" class="a-spacing-small"><p>Easy to use, small and compact for convenient handling, the EX310 features an impact-resistant rubber holster for an excellent grip and protection from other gear while stored in your toolbox. When placed near AC voltage such as a live wire, outlet or switch, the device signals that voltage is detected via a red LED indicator and audible beeper. This compact meter's 0.5 percent basic accuracy is comparable to higher-end meters.</p></div> <h5><div id="header2">Other Functions</div></h5> <div id="text2" class="a-spacing-small"><p>The large 1-inch digits offer easy readability even at a glance. Powered by two AAA batteries, the device also has a low battery indicator. The EX310 measures 5.7 x 2.9 x 1.6 inches (HxWxD), and it weighs 9 ounces. It's backed by a one-year limited warranty.</p></div> <h5><div id="header3">Includes</div></h5> <div id="text3" class="a-spacing-small"><p>Extech EX310 Manual-ranging Mini Multimeter, test leads, tilt stand, protective holster; two AAA batteries; and user manual.</p></div> <h5><div id="header4">Residential Applications</div></h5> <div id="text4" class="a-spacing-small"><p>Installing lights, switches, outlets, and thermostats; HVAC troubleshooting; A/V projects</p></div> </div> <div class="third-col last"> <div style="width: 300px;" class="leftImage"> </div> <div class="break"> </div> <h5><div id="header5">Automotive/Marine Applications</div></h5> <div id="text5" class="a-spacing-small"><p>Installing auxiliary lights, stereos, alarms and remote starters</p></div> <br> <h5><div id="header6">EX310 Mini Multimeter At a Glance:</div></h5> <div id="list0"><ul id="list0inner"><li>Non-contact AC voltage detector with red LED indicator and audible beeper</li><li>9 functions including AC/DC voltage to 600 volts, AC/DC current to 10 amps, resistance, diode testing, continuity testing, and load testing for 1.5-volt and 9-volt batteries</li><li>Large, easily readable 1-inch digits</li><li>2,000 count display</li><li>Includes grippy rubber holster</li><li>Powered by two AAA batteries</li><li>One-year limited warranty</li></ul></div> </div> </div> read more

Extech
$186.99
at Sears

Hygro-Thermometer measures Relative Humidity, Temperature, Dew Point and Wet Bulb "? Compact and rugged design features large disp...lay and bargraph? Display any two parameters (Temperature and Humidity orDew Point, or Wet Bulb) simultaneously? Min/Max... This product: Extech Easyview Hygroand#45;Thermometer $186.99 read more

Extech
$579.99
at Amazon

<div class="aplus"> <div class="leftImage" style="width: 350px;"> <div id="image0"><img src="http://ecx.images-amazon.com/images/I.../3112kF5+EcL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> <h5><div id="header0">Pinless Moisture Psychrometer + IR Thermometer</div></h5> <div id="text0" class="a-spacing-small"><p>The Extech MO295 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage, and the remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. Comes with a pin moisture probe (MO-P1), one 9-volt battery, carrying case, and user manual. Optional specialty moisture probes are available.</p></div> <h5><div id="header1">Features Overview</div></h5> <div id="text1" class="a-spacing-small"><p>The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and a 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure.</p></div> <h5><div id="header2">Additional Features</div></h5> <div id="text2" class="a-spacing-small"><p>The MO295 can store/recall 20 readings in memory, and the meter features a fast analog bargraph for viewing moisture trends, programmable high/low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an Auto Power Off function.</p></div> <div class="break"></div><br> <h4>More Extech Instruments & Accessories to Choose From</h4> <div class="sixth-col"> <div class="centerImage"> <div id="image1"><img src="http://ecx.images-amazon.com/images/I/11ltVcftirL.jpg" alt="" ><div class="imageCaption">MO290<br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header3">Pinless Moisture Psychrometer + IR</div></h5> <div id="text3" class="a-spacing-small"><p>The Extech MO290 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer. This pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. The remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and a 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes complete with a pin moisture probe (MO-P1), one 9-volt battery, carrying case, and user manual. Optional specialty moisture probes are available.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image2"><img src="http://ecx.images-amazon.com/images/I/11brZ-dUBCL.jpg" alt="" ><div class="imageCaption">MO297 <br>View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header4">Pinless Moisture Psychrometer + IR and Bluetooth</div></h5> <div id="text4" class="a-spacing-small"><p>The Extech MO297 is an 8-in-1 meter that combines a pin/pinless Moisture Psychrometer with a built-in infrared (IR) thermometer and METERLiNK (Bluetooth) transmitter that wirelessly transmits moisture and humidity data to selected FLIR thermal imaging IR cameras to incorporate meter readings with thermal images. The pinless moisture sensor allows users to measure moisture in various types of wood and building materials with virtually no surface damage. A remote pin-type probe can be used for contact moisture readings in hard-to-reach areas. The meter has an easy to read, large dual display screen with a back light feature that can be used in dimly lit areas. It simultaneously displays percentage of moisture in wood or material being tested and air temperature, IR temperature, or humidity. Pinless moisture measurements can read to a depth of 0.75-inch below the surface. The non-contact IR thermometer has an 8:1 distance to spot ratio and a 0.95 fixed emissivity. The built-in humidity and temperature probe measures relative humidity, air temperature plus grains per pound (GPP), dew point (DP), and vapor pressure. Additional features include store/recall 20 readings in memory, fast analog bargraph for viewing moisture trends, programmable high or low moisture and humidity alarms, automatic calculation of differential temperature to determine condensation point, minimum/maximum function, data hold, and an auto power off function. Comes with a pin moisture probe (MO-P1), one 9-volt battery, and a carrying case. Optional specialty moisture probes are available.</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image3"><img src="http://ecx.images-amazon.com/images/I/11KXwFBxPVL.jpg" alt="" ><div class="imageCaption">MO290-RK <br>View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header5">Water Restoration Contractor Kit</div></h5> <div id="text5" class="a-spacing-small"><p>The Extech MO290-RK kit uses a combination of moisture meter and thermo-hygrometers to capture all of the ambient conditions as well as the moisture levels under baseboards, in between walls and in hard wood and plywood subfloors. It uses the included RHT10 USB Humidity and Temperature datalogger with RHT10-SW software for GPP (g/kg) calculations. The MO290-RK kit includes an MO-P1 pin probe, MO290-HP hammer probe, MO290-EP deep wall probe and an MO290-BP baseboard probe for all contact moisture readings. The kit is supplied in a rugged, hard carrying case. The kit also includes the MO290 Pinless Moisture Psychrometer and IR Thermometer that monitors moisture in wood and building materials with virtually no surface damage. It has a built in IR thermometer for non-contact temperature readings and a built-in sensor that measures Air Temperature, Relative Humidity, GPP (grains per pound), Dew Point and Vapor Pressure.</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image4"><img src="http://ecx.images-amazon.com/images/I/11kPEr6AOdL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col last"> <h5><div id="header6">MO290-EP</div></h5> <div id="text6" class="a-spacing-small"><p>Extension Probe for Model MO265/290/295/297 Moisture Meters with 30-inch (76.2cm) cable and four pins</p></div> </div> <div class="break"></div> <div class="sixth-col"> <div class="centerImage"> <div id="image5"><img src="http://ecx.images-amazon.com/images/I/11iTQrHb-aL.jpg" alt="" ><div class="imageCaption">View larger</div></div> </div> </div> <div class="third-col"> <h5><div id="header7">MO290-HP</div></h5> <div id="text7" class="a-spacing-small"><p>Hammer Probe for Model MO265/290/295/297 Moisture Meters includes four pins (1.6-inch/4cm pin depth)</p></div> </div> <div class="sixth-col"> <div class="centerImage"> <div id="image6"><img src="http://ecx.images-amazon.com/images/I/11Wy9RG9viL.jpg" alt="" ></div> </div> </div> <div class="third-col last"> <h5><div id="header8">MO290-BP</div></h5> <div id="text8" class="a-spacing-small"><p>Moisture Baseboard Probe for Model MO265/290/295/297 Moisture Meters (dual fixed flat pins with 4.1-inch/10.5cm pin length) with 30-inch cable</p></div> </div> <div class="break"></div> </div> read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping