Dremel

OEO1108 Features: Rotary tool kit 200 Series Two speed rotary tool Cutting guide Corrugated storage case Product reference sheet ... read more

Includes: 1 EZ lock mandrel and 5 metal cutoff wheels EZ lock makes accessory changes easy as pull-twist- release One piece mandre... read more

1/2" diameter Fits mandrel No. 401 (Ace No. 25593) Card of 6

1/2"D x 1/2"H cylinder 1/8" shank For polishing brass, bronze, copper, silver, and steel Includes compound

2.0 AMP 10000-20000 RPM 3/16" shank size Cuts, routs and sands 90 degree pivoting handle for superior comfort and control Telescop... read more

36" flexible shaft Integrated shaft lock button for easy accessory changes Comfort grip hand piece Quick connect to rotary tools A... read more

For paint 80, 120 and 240 grit sanding paper for paint Use 80 grit for sanding off paint Use 120 grit for sanding primer, removing... read more

For wood 60, 120 and 240 grit sanding paper for wood For use with Dremel multi-max Sand in tight and difficult to reach areas 6 pa... read more

4.8 volt Longer run time Use as a spare battery to continue working Replacement battery for Dremel Cordless Mini Mite Rotary tool ... read more

1/32" bit diameter 1/8" shank diameter Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jew... read more

3/32" bit diameter 1/8" shank diameter Ideal for detail engraving, carving and routing for wood, fiberglass, plastic and soft mate... read more

5/64" cylinder 1/8" shank For shaping, hollowing soft metal, plastic and wood

7/32" Use with pro-sharpener, Wen and Dremel chain saw sharpeners Pkg/2

1/16" grout line Quickly removes old grout without damaging the tile Use with the Dremel multi-max (Ace number 2198208)

This Dremel multimax represents the newest in a long line of high speed rotary tools and accessories. Its ease of use, precision, ... read more

Dremel 628 7pc Drill Bit Set 7-piece set contains bit ideal for drilling into soft materials Includes 1/32-inch, 3/64-inch, 1/16-i... read more

Dremel 335-01 Plunge Router Attachment Plunge router attachment for Dremel rotary tool models 400, 398, 395, 300, 285, and 275 Qui... read more

1/8" shank Cuts drywall for electrical boxes and air vents Also works well with spiral cutting guide Ace No. 2104461

5/8" Head Diameter No. 941 1/8" shank For sharpening, deburring, and general purpose grinding of most materials

3/32" diameter Shank diameter: 3/32" (24MM) For fine detail work, cutting, engraving, carving, touch up and finishing Use on wood,... read more

Use 80 grit for sanding off paint. Use 120 grit for sanding primer removing brush strokes, paint runs and drops. Use 240 grit for ... read more

1-1/2" Thin and accurate cutting Reinforcement prevents breakage Easy to assemble Used for reslotting small screws Phillips No. 0,... read more

1/4" tapered head 1/8" shank For shaping, hollowing soft metal, plastic and wood

For use with Model No. 8000- 01 (Ace No. 2101434) High capacity holds a charge longer than a standard NiCd battery Keeps 85% of it... read more

1/8" shank For cutting wheels, sanding discs and polishing wheels For use with No. 409 (Ace No. 23893), 411 (Ace No. 28985), 412 (... read more

1-1/8" blade Cuts 1-1/4" door jambs Hack saw tooth design cuts 6D and 8D finishing nails, non- ferrous metals and soft wood Can re... read more

6.0 AMP motor 17000 RPM Depth guide for precise cuts Makes cuts in a wide variety of materials including wood, plastic, fiberglass... read more

Dremel 545 Diamond Wheel Effective Dremel cutting wheel is completely coated with diamond particles Produces super smooth, fine cu... read more

240 grit Shapes wood and sands curves 3/16" shank for extra torque applications 3/4" sanding drum height 1/2" sanding drum diamete... read more

4.8 volt 2 speed 5000 and 13000RPM's 3 hr charge Shaft lock switch Collet nut for fast replacement of bits Includes 5 bits, batter... read more

5/64" tapered head 1/8" shank Use with Dremel Multi-Pro rotary tools For detail work, cutting, engraving, carving, touch-up and fi... read more

1/4" diameter Drill holes in both flat and contoured glass Diamond impregnated cutting bit for long life Diamond grit around the c... read more

1/4" tapered head 1/8" shank Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particle board, soft metals, and ceramic ... read more

Carbide tipped For "Dremel" engraver model No. 290 (Ace No. 24616) For non-continuous use

The drywall bits allow you to quickly cut drywall for electrical boxes, air vents and other wall features. Its best to use drywall... read more

Converts Dremel rotary tool into mini plunge router Easy-guide handles and convenient bit storage Edge guide Depth adjustment mark... read more

1/8" shank For sharpening, deburring, and general purpose grinding of most materials 3/16" Head Diameter

For floor or wall Removes grout up to 3/8" below the face surface of the tile 1/2" depth adjustment Replacement grout bit Ace No. ... read more

Variable speed Circle cutter/straight edge guide Sanding/grinding guide Storage case Includes 30 genuine Dremel accessories Quick ... read more

Fits most Dremel tools For use on plastic, drywall, fiberglass, vinyl, wood and laminates Depth adjustment up to 3/4" Provides a m... read more

5/16" ball shaped head 1/8" shank For shaping, hollowing soft metal, plastic and wood

3" diameter .075" thickness Dome shaped wheel for flush cuts up to 3/4" For making flush cuts in a variety of wood materials: soft... read more

1/8" bit diameter 1/8" shank diameter Ideal for detail engraving, carving and routing for wood, fiberglass, plastic and soft mater... read more

25/32" Head Diameter 1/8" shank For soft and hard metals, glass, ceramic, porcelain, and gemstones

Hook and loop pad accessory allows the Dremel Multi-Max oscillating tool to accept sand papers and diamond sand paper Works with t... read more

3/4" Used to make precise and plunge cuts May be used on non-ferrous metals, wood, plastic, drywall and other soft materials Depth... read more

9/32" head diameter 1/8" shank For soft and hard metals, glass, ceramic, porcelain, and gemstones

3/32" mini ball shaped head 1/8" shank For shaping, hollowing soft metal, plastic and wood

1/8" shank For sharpening, deburring, and general purpose grinding of most materials 3/8" Head Diameter No. 952

Kit includes: 1 ea No 401 mandrel, 3 ea No 429 polishing wheel, 1 ea No 421 polishing compound 1 ea No 520 polishing wheel, 1 ea N... read more