Dremel Dremel 50 Pc. General Purpose Kit (690-01)

Includes: (1) no. 401 mandrel (1) no. 402 mandrel (36) no. 409 cut-off wheels (1) no. 952 grinding stone (1) no. 407 sanding band/ mandrel (3) no. 120 grit sanding band (1) 421 polishing compound (3) 1/2" felt polishing wheel (2) 1" felt po...lishing wheel (1) no. 194 engraver read more

Dremel

3" Pack of 3 For cutting metal, copper, pipe, conduit, coated wire, shelving, sheet metal, threaded rod sheet and aluminum Use wit...h Dremel Saw-Max SM20 (Ace no. 2361350) read more

Dremel

1/8" shank For sharpening, deburring, and general purpose grinding of most materials 7/16" Head Diameter

Dremel

5/16" tapered ball head 1/8" shank Cone No. 124 For shaping, hollowing soft metal, plastic and wood

Dremel

1/4" bit diameter 1/8" shank diameter Ideal for sharpening, deburring and general purpose grinding on most materials Specifically ...designed for working with conic surfaces Use the 415 dressing stone to clean the surface of the grinding stone read more

Dremel

3/16" diameter 1/8" shank diameter Ball end Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes in... soft metals, plastics and woods Good for curved surfaces read more

Dremel

1/8" diameter 1/8" shank diameter 2 pack Tapered cylinder Ideal for shaping, hollowing, grooving, slotting, inlaying and making ta...pered holes in soft metals, plastics and woods Good for curved surfaces read more

Dremel

1" diameter EZ Lock accessory changes are easy as pull-twist- release Compatible with both EZ402 EZ Lock mandrel and standard 402 ...threaded mandrel (Ace No. 23892) Compatible with all Dremel rotary tools read more

Dremel

1/32" head (short cylinder) 3/32" shank For use on wood, fiberglass, plastic, and soft metals Not for use with hardened materials

Dremel

5/64" cylinder 1/8" shank For shaping, hollowing soft metal, plastic and wood

Dremel

1-1/2" For use with the EZ402 EZ lock mandrel Reinforced cutoff wheels cut two times more than standard 456 cutoff wheels The Drem...el EZ lock makes accessory changes easy as pull-twist-release Compatible with all Dremel rotary tools Pack of 12 read more

Master Halco
$6.99-$8.49
at Ace Hardware

1-3/8" x 2-3/8" Galvanized steel Secures gate in a closed position

Porter-Cable

2.0 AMP motor Dust-sealed switch Orbits 13500 OPM Pad size 4-1/4" x 4-1/2" Paper size 1/4" sheet

Greenlee

3/4" x 5 For fishing wire or cable/wire installation between walls For wood type auger bit with screw point For soft woods or thin... sections Flexible steel shaft read more

Milwaukee

6" 8 TPI 1" high .062 thick For cutting all wood, nail embedded wood, composition material, plastic, light gauge non-ferrous metal...s and aluminum Ideal for plunge cutting 5 blades per pack read more

Milwaukee

7-9" 15.0 AMP 4.2 HP motor 6000 RPM 7" and 9" type 27 guard included External brush doors-reduces service time 7 in. wheel Soft-gr...ip main handle Adjustable tool free burst resistant guard read more

Bosch

1/2" chuck Keyed chuck 8.5 AMPs 0-1000/3000 RPM 0-18000/51000 BPM 2 speeds for high torque and high speed applications Metal gear ...housing Integrated dual fan system Clutch helps minimize torque reaction Side handle Drilling capacities: concrete 3/4", wood 1-5/8", steel 1/2" Includes case read more

Wen

120 volts 7200 strokes/minute Tungsten carbide tip Adjustable stroke Permanently mark valuables Use like a pencil to write, draw, ...engrave on woods, metals, plastics and glass UL listed read more

Wen
Oregon

18" Premium 66 drive link C-loop chain Reduces kickback UL listed and ANSI

Great Neck Saw

Pink Around the house kit Includes: 4-in-1 screwdriver, long nose pliers, steel shaft hammer, measuring tape, open end wrench, tor...pedo level and zippered pink carrying bag read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping