Refine By
Sea Gull Lighting
$368.00
at Luxicore

Dusted ivory glass and subtle industrial pendants, including: T4 G9 halogen lamping and assemblies, four feet of 120V single circu...it rail, one standoff support adapter and one power feed canopy read more

Lamps Plus

A charming bird accent lamp in a distressed white finish topped with a natural colored linen lamp shade. Perfect for a country cot...tage style home, place this bird accent lamp on a night stand or side table. The distressed white finish provides a vintage style room. Topped with a light colored linen shade. Crafted with pride in the U.S.A., in the Indiana workshops of AHS Lighting and Home Decor. read more

Tech Lighting

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately). The l...ow-voltage leads from the remote transformer connect to canopy leads inside the junction box. read more

Tech Lighting

A direct-end power feed brings power from a remote transformer to the rail at an end of the run and mounts to a wall perpendicular... to the run. The low-voltage leads from the remote transformer are connected to the canopy leads inside the junction box. read more

Tech Lighting

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering ...a MonoRail low-voltage lighting system. It can power lamps totaling up to 300 watts. The transformer is concealed inside a decorative housing with a single integral power feed and fast acting secondary short circuit and overload protection that will safely turn the system off should a short occur. Once the short has been removed, the unit can be reset by simply flipping the wall switch off and on. read more

Tech Lighting

The field-cuttable rigid standoff is recommended for curvy runs or runs with heavier Heads, Pendants or Functional art, such as gl...ass pendants. Rigid standoffs are compatible with various power feed options: Use the chart below to determine the appropriate standoff for your run. read more

Tech Lighting

Center Power Feeds are generally used to bring power to a Two-Circuit MonoRail system when the transformer or canopy cannot be loc...ated directly above the run. The center power feed can be used anywhere within the run and includes a removable 4" round canopy and 12 field-cuttable softwire leads. Specify dual-feed when using a dual-feed transformer. Dual-feed canopy includes isolating connectors. read more

Tech Lighting

The "T" connector joins three pieces of Two-Circuit MonoRail to form a "T". These connectors are conductive, so you may power the ...system from any of the runs. At least one standoff must be located near the connector. read more

Tech Lighting

This single-feed surface transformer converts standard 120 line voltage to 12 volts to provide the necessary voltage for powering ...a MonoRail low-voltage lighting system. It can power lamps totaling up to 300 watts. The transformer is concealed inside a decorative housing with a fast acting secondary circuit breaker that will safely turn the system off should a short occur. Once the short has been removed the breaker can be reset. read more

Tech Lighting

This remote magnetic transformer converts standard 120volt line-voltage to 12 volts, providing the necessary voltage for powering ...a Two-Circuit MonoRail low-voltage lighting system. Each transformer includes fast-acting secondary circuit breakers that will safely turn the system off should a short occur. Once the short has been removed the breakers can be reset. Transformer powers lamps totaling up to 300 watts. read more

Tech Lighting

These conductive connectors join sections of Two-Circuit MonoRail together end to end at desired sharp horizontal angle. Set of th...ree. read more

Tech Lighting

The field-cuttable rigid standoff is recommended for curvy runs or runs with heavier elements, such as glass pendants. Rigid stand...offs are compatible with various power feed options: Use the chart below to determine the appropriate standoff for your run. Use standoff supports every three feet of Two-Circuit MonoRail run and at corners. Standoffs can be positioned to cover points where rails are joined. read more

Tech Lighting

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately). The l...ow-voltage leads from the remote transformer connect to canopy leads inside the junction box. read more

Tech Lighting

Center Power Feeds are generally used to bring power to a MonoRail system when the transformer or canopy cannot be located directl...y above the run. The center power feed can be used anywhere within the run and includes a removable 4" round canopy and 12 of field-cuttable softwire leads. Specify dual-feed when using a dual-feed transformer. Dual-feed canopy includes isolating connectors. read more

Tech Lighting

Extends 36" from the wall to support and power rail from a remote transformer. Field-cuttable. Includes 4" round canopy and 2" squ...are canopy. read more

Tech Lighting

This remote magnetic transformer converts standard 120 or 277 volt line-voltage to 24 volts, providing the necessary voltage for p...owering a MonoRail, Kable Lite, Wall MonoRail or FreeJack low-voltage lighting system. This remote magnetic transformer can be used to power lamps totaling up to 600 watts. This transformer is equipped with fast-acting secondary circuit breaker that will safely turn off the system should a short occur. Once the short has been removed the breaker can be reset. read more

Tech Lighting

A single-feed canopy is mounted to the ceiling above the MonoRail run. It brings power to the MonoRail run from a remote transform...er (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside the junction box. read more

Tech Lighting

Two-circuit MonoRail bends very easily by hand to almost any imagineable shape, but the pre-bent S curve makes Two-Circuit Monorai...l even easier to install. Pre-bent into a horizontal S Curve. Consult drawing for approximate dimensions. Rated for 300 watts per circuit at 12 volts. Each piece of rail is shipped with conductive connectors to join rail pieces end to end. Order additional connectors if cutting and rejoining rails. read more

Tech Lighting

Canopy mounts to the wall and brings power to the Wall MonoRail run from a single-feed remote transformer (sold separately). The l...ow-voltage leads from the remote transformer connect to canopy leads inside the junction box. read more

Tech Lighting

Includes 8 long hand-bendable MonoRail, one set of decorative end caps, three Wall MonoRail standoffs, an end power feed, and a 12... volt 300 watt plug-in remote magnetic transformer. Add up to six 50 watt elements or up to eight 35 or 37 watt elements. read more

Tech Lighting

Sleek, minimalist design meets easy installation. For use when a longer drop is preferred. The Low-Profile combines a sleek new de...sign with the ability to use 4" or longer standoffs and ease of installation. First, the installer mounts and wires the upper canopy in much the same way a standard line-voltage pendant would be mounted. Second, the installer snaps the lower canopy into the upper canopy without the need for any tools. The electrical connections are made automatically due to the mating components. Finally the installer attaches the rail to the single integral power feed. The transformer bay is housed completely in the bottom canopy, so should there be any problems with the transformer at any time, only the bottom canopy would need to be removed. The upper canopy can remain in place. It??s that easy. This single-feed low-prifle surface transformer converts standard 120 line voltage to 12 volts to provide the necessary voltage for powering a MonoRail low-voltage lighting system. It can power lamps totaling up to 300 watts and features a fast acting secondary short circuit and overload protection that will safely turn the system off should a short occur. Once the short has been removed, the unit can be reset by simply flipping the wall switch off and on. read more

Tech Lighting

The "T" connector joins three pieces of MonoRail to form a "T". These connectors are conductive, so you may power the system from ...any of the runs. At least one standoff must be located near the connector. read more

Tech Lighting

The MonoRail Low-Profile Power Feed Canopy allows for the closest-to-ceiling possible mounting of a MonoRail run. It brings power ...directly above a MonoRail run from a remote transformer (sold separately). The low-voltage leads from the remote transformer are connected to the canopy leads inside the junction box. Compatible with MonoRail 1" Rigid Standoff. Not compatible with Power Extenders nor Power Vault Adapter. read more

Tech Lighting

Aluminum wings; glass body in white or blue. Two 18" hand-bendable, field-cuttable wire leads. Includes low-voltage, 20 watt halog...en bi-pin lamp. Aluminum only. read more

Tech Lighting

Aluminum wings and legs; glass body. Two 18" hand-bendable, field-cuttable wire leads. Includes low-voltage, 20 watt halogen bi-pi...n lamp. Aluminum only. read more

Tech Lighting

Includes 8 long hand-bendable MonoRail, two sets of decorative end caps, two rigid standoffs, and a 12 volt 300 watt surface magne...tic transformer. Rail drops 4.8" from ceiling. Add up to six 50 watt elements or up to eight 35 or 37 watt elements. read more

Tech Lighting

Includes 8 long hand-bendable MonoRail, two sets of decorative end caps, two rigid standoffs, a power feed canopy and a 12 volt 30...0 watt remote magnetic transformer. Rail drops 2" from ceiling. Add up to six 50 watt elements or up to eight 35 or 37 watt elements. read more

Tech Lighting

Low-voltage conductor of two individual conductive metal pieces fused together by a plastic separator. Hand-bendable, field-cuttab...le MonoRail is rated for 300 watts at 12 volts, 600 watts at 24 volts. Each piece of rail is shipped with conductive connectors to join rail pieces end to end. Order additional connectors if cutting and rejoining rails. Standard read more

Tech Lighting

Horizontal 90?? curves are sold by radius, or the distance from the center of the circle to the outside edge. Join four 90?? curve...s to create a circle with a diameter (overall width) equal to twice the specified radius. For a factory bend not shown, please call for a custom quotation. read more

Tech Lighting

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering ...a MonoRail low-voltage lighting system. It can power lamps totaling up to 150 watts. The transformer is concealed inside a decorative housing with a fast acting secondary circuit breaker that will safely turn the system off should a short occur. Once the short has been removed the breaker can be reset. read more

Tech Lighting

MonoRail pre-bent into a horizontal S curve. Consult the drawing for approximate dimensions. For a factory bend not shown, please ...call for a custom quotation. read more

Tech Lighting

The adjustable standoff??s cable virtually disappears for a clean and elegant look. It is best used on fairly straight runs with a... drop greater than 6". A wire grip allows you to easily shorten or lengthen the cable to size it for use. Use standoff supports every three feet of MonoRail run and at corners. Standoffs can be positioned to cover points where rails are joined. read more

Tech Lighting

This remote magnetic transformer converts standard 120 or 277 volt line-voltage to 12 volts, providing the necessary voltage for p...owering a MonoRail, Kable Lite, Wall MonoRail or FreeJack low-voltage lighting system. This remote magnetic transformer can be used to power lamps totaling up to 300 watts. This transformer is equipped with fast-acting secondary circuit breaker that will safely turn off the system should a short occur. Once the short has been removed the breaker can be reset. read more

Tech Lighting

This remote magnetic transformer converts standard 120 or 277 volt line-voltage to 12 volts, providing the necessary voltage for p...owering a MonoRail, Kable Lite, Wall MonoRail or FreeJack low-voltage lighting systems. This transformer can be used to power lamps totaling up to 300 watts and is equipped with fast-acting secondary circuit breaker that will safely turn off the system should a short occur. Once the short has been removed the breaker can be reset. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping