Refine By
Kichler
$514.00 $771.00
at Homeclick

This twin landscape ballast requires a maximum 70 watt bulb. The body is made of steel and is suitable for wet locations.

Kichler
$160.00 $240.00
at Hayneedle

Available in a rugged textured bronze finish Ideal for pathway lighting along brick Die-cast aluminum housing Recessed design fits... into a brick wall Uses Bi-Pin light bulbs Slatted louver face design Whats Included BulbWhats Not Included Supply Wire, TransformerDescription Installing landscape lighting is easy, but keep in mind that it requires more than just the lighting fixtures. Landscape lighting systems also require: Transformer - The transformer is the power supply for your fixtures. It plugs into a standard household 110v outlet. The total lamp wattage of all fixtures connected to a transformer must be less than the capacity of the transformer. To determine which transformer you need, add up the wattage of all lamps and add 10% more as a safety factor. Example: If youre installing five light fixtures rated at 20 watts each, you will need a transformer that can accomodate at least 110 watts. (TRANSFORMER SIZE = TOTAL WATTAGE OF LAMPS x 1.1) Cable - This is the electrical wire that runs from your transformer to your individual light fixtures. Determine the length of cable needed by measuring the distance from the outlet to the farthest fixture location. Adding branches of cable is recommended for lights that are not located in a straight line from the transformer to the farthest fixture, so include the length of cable that branches off the main line. Remember: always leave a couple extra feet of cable per fixture for potential repositioning. Cable Length Chart See compatible transformers and cable for this lighting fixture below (scroll down). read more

Kichler
$148.00 $222.00
at Hayneedle

Available in a rugged textured bronze finish Ideal for pathway lighting Die-cast aluminum housing Recessed design fits into a bric...k wall Uses Bi-Pin light bulbs Sealed heat-resistant glass lens Whats Included BulbWhats Not Included Supply Wire, TransformerDescription Installing landscape lighting is easy, but keep in mind that it requires more than just the lighting fixtures. Landscape lighting systems also require: Transformer - The transformer is the power supply for your fixtures. It plugs into a standard household 110v outlet. The total lamp wattage of all fixtures connected to a transformer must be less than the capacity of the transformer. To determine which transformer you need, add up the wattage of all lamps and add 10% more as a safety factor. Example: If youre installing five light fixtures rated at 20 watts each, you will need a transformer that can accomodate at least 110 watts. (TRANSFORMER SIZE = TOTAL WATTAGE OF LAMPS x 1.1) Cable - This is the electrical wire that runs from your transformer to your individual light fixtures. Determine the length of cable needed by measuring the distance from the outlet to the farthest fixture location. Adding branches of cable is recommended for lights that are not located in a straight line from the transformer to the farthest fixture, so include the length of cable that branches off the main line. Remember: always leave a couple extra feet of cable per fixture for potential repositioning. Cable Length Chart See compatible transformers and cable for this lighting fixture below (scroll down). read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping