Refine By
Kraft Tool

This lightweight magnesium concrete float is perfect for floating small areas of concrete. Fitted with a 360 degree all-angle brac...ket. Kraft Tool Made in the USA. read more

CS Unitec Concrete Saws

CS Unitec Heavy duty pneumatic saws are designed for construction, industrial and municipal cutting applications. Low maintenance.... No carburetors or fuel lines to maintain. Cut wet or dry. Ideal for sidewalk repair, pile cutting, demolition, bridge work and pipe cutting. Wet or dry cutting of concrete, reinforced concrete, asphalt, masonry, steel and more Cut up to 7 deep Use indoors or outdoors ?? no gas or engine fumes Low maintenance ?? no belts, pistons, fuel lines or carburetors Accept diamond or abrasive blades Adjustable blade guard with built-in 3/4 water connection for wet cutting or dust suppression In-line oiler for motor lubrication 1 arbor size, 1/2 NPT air connection read more

Olympia Tools

Hardened and tempered steel Vinyl Hand Guard Hex Shanks with precision ground and polished tips Meets Federal Specifications, Manu...facturer: Olympia Tools read more

Stanley Hand Tools

Features:Ideal for cutting through and breaking up concreteDurable bull point that cuts fast and lasts longErgonomic, bi-material ...hand guard helps protect from overstrike, reduces slipping and absorbs vibrationsOne-piece construction forged for strength1-inch heat-treated tip allows for additional sharpeningHardened, quenched and tempered for long life and durabilityPowder-coated finish for easy visibility What's In The Box:Stanley 16-329 3/4-In X 12-In FatMax Concrete Chisel with Bi-Material Hand Guard read more

Olympia Tools

Hardened and tempered steel Coated Handles Hex Shanks with precision ground and polished tips Meets Federal Specifications, Manufa...cturer: Olympia Tools read more

STANLEY-BOSTITCH

Durable bull point that cuts fast, and lasts long Ideal for cutting through and breaking up concrete Bi-metal hand guard and ergon...omic grip for use protection and comfort Heat treated to meet or exceed ANSI specifications, Manufacturer: BOSTITCH read more

MK Diamond
$1,748.99
at Amazon.com

The MK Diamond CX-3 is a compact, lightweight concrete saw engineered for maneuverability and reliability. CX-3 saws can be used f...or wet or dry cutting and cuts can be made from both left and right sides of the saw. Features:Honda GX160 Cyclone engineCompact, lightweight, engineered for maneuverability and reliabilityCan be used for wet or dry cuttingCorrosion resistant cast-aluminum blade guardBuilt-in water distribution system supplies water to both sides of bladeBlade guard mounts on either left- or right-hand side of saw and cuts within 1-inch of wall or curbSturdy single piece steel motor mount weldment to minimize vibration1-inch diameter blade shaft with self aligning bearingsHinged blade guard provides easy access for blade changes and inspectionFolding handle bar for compact transportPoly V-belt for positive power transmissionOverall dimensions: 32 in. L x 19 in. W x 42 in. H What's In The Box:MK Diamond CX-3 Honda 14-Inch Walk-Behind Concrete Saw12-inch dry cutting diamond blade read more

Footprint Tools

High carbon steel Ground cutting edge Domed anti-mushroom head Extra material where blade meet the handle Hard wearing plastic gri...p and hand protection, Manufacturer: Footprint Tools read more

Kraft Tool

CC671 CONCRETE CHISEL- Forged from the finest tool steel- well tempered

Dasco

Dasco Pro mason chisel is ideal for cutting or shaping brick, cement block, cinder block, or trimming excess mortar. The target he...ad has been designed to help Protect hands from missed hits and to reduce mushrooming from repeated blows. read more

Marshalltown

Marshalltown Company is more than a manufacturer of premium quality trowels. We are committed to leading the construction tool ind...ustry and providing the best products for the contractor to complete every job with the best results possible. read more

Stanley Hand Tools

Features:Ideal for cutting through and breaking up concreteDurable bull point that cuts fast and lasts longErgonomic, bi-material ...hand guard helps protect from overstrike, reduces slipping and absorbs vibrationsOne-piece construction forged for strength1-inch heat-treated tip allows for additional sharpeningHardened, quenched and tempered for long life and durabilityPowder-coated finish for easy visibility What's In The Box:Stanley 16-329 3/4-In X 12-In FatMax Concrete Chisel with Bi-Material Hand Guard read more

Diamond Walk Behind Saw - Core Cut

Diamond Products 36 blade capacity (14-36 optional) One hand sawing control Forward-positioned motor for more weight at the blade ...and less at the operator 30 HP Deutz diesel engine (25HP, 30HP or 40HP electric motors optional) Eaton transmission Frame designed for the higher torque of a large horsepower engine, but more compact than the CC6500 saw read more

Task Tools

Task Tools concrete point chisel is single-piece construction and . The blade is made of drop-forged C65 carbon steel. Includes sa...fety grip hand protection. Blade hardness: HRC53-59; striking top hardness: HRC35-45. read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 18 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 16 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 12 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 14 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

ICS
$1,953.00
at Grainger.com

Concrete Chain Saw, Bar Length 14 In., Engine Rpm 9500, 5.0 Hp, Fuel Type Gas, Engine 2 Stroke, Single Cylinder, Air Cooled, Engin...e Displacement 4.7 Cu. In. (77cc), Tool Weight 21 Lb., Noise Level 100db @ 3 Ft., Vibration 10.5 M/sec. Front Handle, Water Supply 20 Psi Min., Fuel Tank Capacity 0.23 Gal., Fuel Mix Ratio 25 To 1, Replacement Chain Mfr. No. 71486, Includes Bar And Chain read more

ICS
ICS

Concrete Chain Saw Chain, Bar Length 14 In., Gauge 0.4, Pitch 3/8 In., Features Twinmax 32 Unique Double Bumper Design

ICS
ICS

Concrete Chain Saw Bar, Bar Length 12 In., Features Laser Cut Internal Water Channels Keep The Nose Sprocket Lubricated.

ICS
ICS
$2,917.00
at Grainger.com

Concrete Chain Saw, Bar Length 16 In., Engine Rpm 9300, 6.4 Hp, Fuel Type Gas, Engine 2 Stroke, Single Cylinder, Air Cooled, Engin...e Displacement 5.7 Cu. In. (94cc), Tool Weight 21 Lb., Noise Level 100db @ 3 Ft., Vibration 3.9 M/sec. Front Handle, 4.1 M/sec. Rear Handle, Water Supply 20 Psi Min., Fuel Tank Capacity 0.26 Gal., Fuel Mix Ratio 25 To 1, Replacement Chain Mfr No. 71706 And 71607, Includes Powerhead, Bar And Chain read more

ICS
ICS

Concrete Chain Saw Chain, Bar Length 12 In., Gauge 0.4, Pitch 3/8 In., Features Twinmax 29 Unique Double Bumper Design

ICS
ICS
$2,783.00
at Grainger.com

Concrete Chain Saw, Bar Length 12 In., Engine Rpm 9300, 6.4 Hp, Fuel Type Gas, Engine 2 Stroke, Air Cooled, Engine Displacement 5....7 Cu. In. (94cc), Tool Weight 21 Lb., Noise Level 112db @ 3ft., Vibration 3.9 Msec Front Handle, Water Supply 20 Psi Min., Fuel Tank Capacity 0.26 Gal., Fuel Mix Ratio 25 To 1, Replacement Chain Mfr. No. 531743, Includes Bar And Chain read more

ICS
ICS
$2,604.00
at Grainger.com

Concrete Chain Saw, Bar Length 14 In., Engine Rpm 9300, 6.4 Hp, Fuel Type Gas, Engine 2 Stroke, Single Cylinder, Air Cooled, Engin...e Displacement 5.7 Cu. In. (94cc), Tool Weight 21 Lb., Noise Level 100db @ 3 Ft., Vibration 3.9 M/sec. Front Handle, 4.1 M/sec. Rear Handle, Water Supply 20 Psi Min., Fuel Tank Capacity 0.26 Gal., Fuel Mix Ratio 25 To 1, Replacement Chain Mfr. No. 71486 And 71705, Includes Powerhead, Bar And Chain read more

ICS

Handguarded Concrete Chisel, Tip Size (In.) 3/4, Length (In.) 12, Chrome Vandium Steel, Application Demolition Features Applicatio...n : Demolition Tip Size : 3/4 Material : Chrome Vandium Steel Item : Handguarded Concrete Chisel Length : 12 read more

Stanley Hand Tools

Features:Ideal for cutting through and breaking up concreteDurable bull point that cuts fast and lasts longErgonomic, bi-material ...hand guard helps protect from overstrike, reduces slipping and absorbs vibrationsOne-piece construction forged for strength1-inch heat-treated tip allows for additional sharpeningHardened, quenched and tempered for long life and durabilityPowder-coated finish for easy visibility What's In The Box:Stanley 16-329 3/4-In X 12-In FatMax Concrete Chisel with Bi-Material Hand Guard read more

ICS
$2,898.00
at Grainger.com

Concrete Chain Saw, Bar Length 16 In., Engine Rpm 9300, 6.4 Hp, Fuel Type Gas, Engine 2 Stroke, Air Cooled, Engine Displacement 5....7 Cu. In. (94cc), Tool Weight 21 Lb., Noise Level 112db @ 3ft., Vibration 3.9 Msec Front Handle, Water Supply 20 Psi Min., Fuel Tank Capacity 0.26 Gal., Fuel Mix Ratio 25 To 1, Replacement Chain Mfr. No. 525342, Includes Bar And Chain read more

ICS
KNIPEX

Knipex Tools is the worlds largest manufacturer of professional pliers since 1882. Knipex Pliers, Cutters, Insulated Tools and oth...er products have been the tools of choice for Professional Tradesmen and end users who are serious about their hand tools and demand industrial quality. Knipex Tools are made from start to finish utilizing the highest quality materials. Based in Germany, KNIPEX Tools are German engineered to produce a tool unmatched in the industry in terms of features, comfort, design and performance. KNIPEX Bolt Cutters offer high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Cut through prestressing steel and tempered steel wire up to a hardness of 48 HRC and are extremely hard wearing. The long service life results from the use of high performance Chrome Vanadium steel for the blades. Special attention was also paid to the forged joint for premium performance. read more

Proline

Champion Cutting Tool Proline CM95 series SDS Plus masonry hammer drills are made from fine German made craftsmanship. These carbi...de tipped drills are designed to be most effectively used in concrete and hard masonry materials. Versatile slot drive system hammer bits fit most rotary hammers. Vacuum brazed with cooper at 1900-Degree F. Vacuum heat treated tool body to 50RC. Made with grade carbide. Cm95 drills have reinforced flutes and chisel shaped carbide tip for faster penetration. This set also includes two CM95X solid tip cross-head bits that can also penetrate rebar. read more

Simpson Strong Tie

Heavy-duty Simpson carbide-tipped drill bits are premium quality, professional grade, manufactured by german engineers to the high...est industry standards. They are design to meet precise tolerance requirements and incorporate proprietary features that enhance durability, drilling speed and usability. Regular and quad head bit and solid-tipped tip configurations are available. Shank styles include SDS-Plus, SDS-Max, Spline and Straight. Drill bits conform to ANSI Standard B212.15. read more

Goldblatt Tools
$50.24 $44.27
at Walmart.com

Concrete Finishing Trowel, Square End Type, Length 16 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 12 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools
$52.52 $46.26
at Walmart.com

Concrete Finishing Trowel, Square End Type, Length 18 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

HUSQVARNA CONSTRUCTION PRODUCTS
$1,921.00
at Grainger.com

Walk Behind Concrete Saw, Power Source 4 Cycle Gasoline Engine, Blade Dia. 14 In., Arbor Size 1 In., Depth Of Cut 4-5/8 In., Engin...e Brand Robin, 8.5 Hp, Fuel Capacity 1.59 Gal., Tool Weight 112 Lb., Length 36 In., Width 15 In., Height 39 In., Application Cutting Concrete And Asphalt, Blade To Wall 2 In., Features Light And Compact, Spring Assisted Raise/lower System, Adjustable Handles, Left Hand Cutting Only read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 18 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 16 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 20 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 14 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Goldblatt Tools

Concrete Finishing Trowel, Square End Type, Length 12 In, Width 4 In, High Carbon Steel Material, Wood Handle, Camel Back Handle D...esign, Handle Length 4 1/2 In, Handle Dia 2 In, Reinforced Aluminum Handle Mount And Spine, For Finishing Forms And Flat Work read more

Multiquip
$2,162.65
at Walmart.com

Multiquip FCG1-6H Features: -Lightweight, compact and productive.-Front, rear pointer drops into cut ensuring a straight line.-Pol...yurethane wheels with permanently sealed ball bearings.-Cuts control joints in green concrete and decorative lines in cured concrete.-Saws right to the edge of walls and columns.-Adjustable handle height for operator comfort.-Vacuum nozzle hook-up on blade guard.-Powerful gasoline engine permits light slab demolition.-Product Type: Tile saw/Masonry saw.-Distressed: No.-Application Material: Concrete.-Power Source: Electric; Gas.-Portable-Handheld: Yes.-Country of Manufacture: United States.Dimensions: -Overall Width - Side to Side: 10.-Blade: Yes -Blade Guard Length: 10.-Blade Length/Diameter: 10.-Depth of Cut at 90 Degrees: .-Depth of Cut at 45 Degrees: .-Maximum Depth of Cut: 3.25.-Blade Capacity: 10..-Cord: No -Cord Length: ..-Handle: No -Handle Width: .-Handle Height: ..-Wheel: Yes -Wheel Diameter: 5.-Wheel Base Length: .-Hand Wheel Height: .-Rear Axle Length: 6.-Front Axle Length: 8..-Table: No -Table Depth: .-Table Width: .-Table Height: .. read more

Multiquip
$2,897.19
at Walmart.com

Multiquip SP113H18 Features: -This hardy saw is equipped with a retractable cutting guide, locking ACME thread raise or lower syst...em, industrial blade shaft assembly and reinforced box steel frame.-Superb tracking provides precise cuts.-Rugged, proven design.-Product Type: Tile saw/Masonry saw.-Distressed: No.-Application Material: Concrete.-Power Source: Electric; Gas.-Country of Manufacture: United States.Dimensions: -Overall Width - Side to Side: 18.-Blade: No -Blade Guard Length: .-Blade Length/Diameter: .-Depth of Cut at 90 Degrees: .-Depth of Cut at 45 Degrees: .-Maximum Depth of Cut: .-Blade Capacity: ..-Cord: No -Cord Length: ..-Handle: No -Handle Width: .-Handle Height: ..-Wheel: Yes -Wheel Diameter: 8.-Wheel Base Length: .-Hand Wheel Height: .-Rear Axle Length: 12.-Front Axle Length: 10..-Table: No -Table Depth: .-Table Width: .-Table Height: .. read more

KNIPEX

Knipex Tools is the worlds largest manufacturer of professional pliers since 1882. Knipex Pliers, Cutters, Insulated Tools and oth...er products have been the tools of choice for Professional Tradesmen and end users who are serious about their hand tools and demand industrial quality. Knipex Tools are made from start to finish utilizing the highest quality materials. Based in Germany, KNIPEX Tools are German engineered to produce a tool unmatched in the industry in terms of features, comfort, design and performance. KNIPEX Bolt Cutters offer high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle, transmission ratio and ergonomic handle shape. Cut through prestressing steel and tempered steel wire up to a hardness of 48 HRC and are extremely hard wearing. The long service life results from the use of high performance Chrome Vanadium steel for the blades. Special attention was also paid to the forged joint for premium performance. read more

HUSQVARNA CONSTRUCTION PRODUCTS
$7,343.00
at Grainger.com

Walk Behind Concrete Saw, Power Source 4 Cycle Gasoline Engine, Blade Dia. 20 In., Arbor Size 1 In., Depth Of Cut 7-5/8 In., Engin...e Brand Honda, 6.5 Hp, Fuel Capacity 1.72 Gal., Tool Weight 325 Lb., Length 89 In., Width 26 In., Height 42 In., Application Cutting Concrete And Asphalt, Blade To Wall 2 1/4, Features ,gas Assisted Raise/lower System, Hydrostatic Differential Drive, Blade Shaft System Allows For A Minimum Of 250 Maintenance Free Hours, Right Hand Cutting Only read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping