Refine By
BUD Industries

Internal panels for die-cast aluminum NEMA 4 for AN series boxes. Used to mount customer equipment inside the enclosures. Assemble...s to mounting bosses on inside of enclosure. Natural finish. Fits enclosure: AN-1323, AN-1323-G, AN-2823, AN-2823-B. Measures 9-23/32" length by 5-25/32" width by 3/64" thick. read more

BUD Industries

Blend of 'T' and rectangular shaped enclosures providing more room for internal components. Ergonomically designed with soft ribbe...d rounded sides that provide secure and comfortable grasp. Available with integral battery compartment designed to accept (2) or (4) AAA batteries. (Battery contact kits are included). Made from high impact resistant ABS plastic with UL94V-0 flammability rating. Internal PCB mounting bosses. Complete with top cover, bottom cover, front panel, battery door, and assembly hardware. Recessed top suitable for label and keypad. Measures 6-17/64" length by 3-11/16" width by 57/64" height. read more

BUD Industries

Durable UL94V-0 rated ABS/PC blend plastic housing. Three levels of PC board mounting locations - PC boards not supplied. Bottom l...evel accepts PC board with modular type terminals on 0.2" centers. Removable terminal guards have snap-off tabs to match number of terminals used. Snap-fit design allows tool-less assembly of all parts including PC boards. Snap-fit front cover is easily removable for machining or silk-screening. Fits standard 35mm DIN rail. Number of PCB terminals 36. Made of plastic. Light gray finish. Measures 4-11/64" length by 3-35/64" width by 2-1/4" height. read more

BUD Industries

Polycarbonate molded enclosures meet NEMA specifications and ideal for PCB enclosures, junction boxes and other applications in th...e electrical and electronic industries. Style 1 - Light gray polycarbonate body and cover. Body/Cover - UV stabilized , UL94-HB flammability rating, suggested service temperature -40C to 120C. Designed to IP65 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications. UL Listing is pending. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. Most models have internal guide slots for mounting PCB assemblies vertically. Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330). Cover screws are M-4 stainless steel, non-magnetic and fasten into threaded brass inserts. PNR-Series Boxes feature a smooth, recessed top cover. Cover included design. Card guides, PCB supports. Ratings : IP65, IP66, IP67, NEMA 1,2,4,4X,12,13, UL-508. External measures 7-55/64" length by 5-29/32" width by 2-5/32" height; internal measures 7-17/32" length by 5-39/64" width by 1-29/32" height. read more

BUD Industries

L Shaped panel design. Components or controls can be mounted to any surface. Made of aluminum. Natural finish. Measures 5" width b...y 2" height by 4" depth. read more

BUD Industries

Aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional s...upport. Optional bottom plate is easily attached. Natural finish. Measures 17" length by 10" width by 4" height. read more

BUD Industries

For use with 12" length by 12" width aluminum chassis. Used to protect wiring or components, or as a dust cover on underside of ch...assis. Made from.040" thick aluminum. Natural finish. Measures 11-51/64" length by 11-51/64" width by 9/64" thick. read more

BUD Industries

Small metal electronics enclosures. Extruded aluminum box with silver housing finish and black plastic bezels. These low cost extr...uded aluminum enclosures offer an alternative to the standard die cast or fabricated aluminum box. The silver colored finish is offset by the black plastic bezels producing a classic, yet futuristic, appearance to your product. Removable end panels allow for easy and low cost modifications. One piece extruded aluminum housing. External measures 9-5/16" length by 6-1/8" width by 3-11/64" height; internal measures 8-1/2" length by 5-11/32" width by 2-51/64" height. read more

BUD Industries

Small metal electronics enclosure. Made of 0.04" aluminum. Sturdy, all-welded body. Economical cabinets have removable front and b...ack panels. Measures 6" width by 9" height by 5" depth. read more

BUD Industries

Small metal electronics enclosures. Extruded aluminum box with silver housing finish and black plastic bezels. These low cost extr...uded aluminum enclosures offer an alternative to the standard die cast or fabricated aluminum box. The silver colored finish is offset by the black plastic bezels producing a classic, yet futuristic, appearance to your product. Removable end panels allow for easy and low cost modifications. One piece extruded aluminum housing. External measures 6-61/64" length by 6-1/8" width by 3-11/64" height; internal measures 6-1/8" length by 5-11/32" width by 2-51/64" height. read more

BUD Industries

Small metal electronics enclosures. Extruded aluminum box with silver housing finish and black plastic bezels. These low cost extr...uded aluminum enclosures offer an alternative to the standard die cast or fabricated aluminum box. The silver colored finish is offset by the black plastic bezels producing a classic, yet futuristic, appearance to your product. Removable end panels allow for easy and low cost modifications. One piece extruded aluminum housing. External measures 5-3/8" length by 6-1/8" width by 3-11/64" height; internal measures 4-35/64" length by 5-11/32" width by 2-51/64" height. read more

BUD Industries

Bud Industries hh-3539-bbl boot, blue ,style "k",grabber, bud hh3539bbl accessory boot, blue , style "k", grabber plastic boot.

BUD Industries

Designed for 19" panel width racks. Heavy 18 gauge formed steel panel, with twelve plastic cable clips. Black finish. Includes all... mounting hardware. Measures 19" width by 3-1/2" height. read more

BUD Industries

Use on Bud cabinet racks: Series 60, Series 2000, LPR Rack, All American, Classic II, Economizer, Design Features: 12 gauge steel.... Comes complete with all mounting hardware. 21" panel space. read more

BUD Industries

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. UL listed to UL508-4x requirements. PC/PBT blended plastic enc...losures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. UL listed to UL508-4x requirements. PC/PBT blended plastic enc...losures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries

High impact ABS molded enclosures meet NEMA specifications and ideal for PCB enclosures, junction boxes and other applications in ...the electrical and electronic industries. Style 3 - (For indoor use only) Dark gray ABS body and cover. Body/Cover - UL94-HB flammability rating, suggested service temperature 0C to 80C. Designed to IP65 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications. UL Listing is pending. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. Most models have internal guide slots for mounting PCB assemblies vertically. Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330). Cover screws are M-4 stainless steel, non-magnetic and fasten into threaded brass inserts. PNR-Series Boxes feature a smooth, recessed top cover. Cover included design. Card guides, PCB supports. Ratings : IP65, IP66, IP67, NEMA 1,2,4,4X,12,13, UL-508. External measures 7-55/64" length by 5-29/32" width by 2-15/16" height; internal measures 7-17/32" length by 5-39/64" width by 2-41/64" height. read more

BUD Industries
$18.50
at Amazon

Plastic style F design features: Highly decorative and versatile, sloped plastic desktop enclosure. No-display version. Light gray... plastic top and bottom covers. Small dark gray plastic cable access panel in rear. Natural finish aluminum sloped panel. PCB and component mounting bosses in bottom cove. Horizontal display version. Light gray plastic top and bottom covers with horizontal display insert area in top cover. Large gray plastic cable access panel in rear. Vertical display version. Light gray plastic top and bottom covers with vertical natural finish aluminum display panel. Comes complete with all assembly hardware and four rubber feet. Durable UL94-HB rated ABS material. Easily modified with common machine shop tools. Measures 8-11/16" width by 3-15/16" height by 6-9/64" depth. read more

BUD Industries
$17.50
at Amazon

This heavy duty steel junction box is well suited for a variety of junction and pull box electrical applications. Heavy duty 16 ga... welded steel construction. Screwed on flat cover with key holes for easy assembly. Four wall mounting holes in back. Embossed grounding hole in bottom allows easy access and flush wall mounting. Durable ANSI65 grey powder coating. Complies with NEMA and UL type 1 rating. Ul listing pending. Ratings : NEMA 1. 32.0" Area (length by width). Cover included design. Wall mount features. read more

BUD Industries
$20.50
at Amazon

This heavy duty steel junction box is well suited for a variety of junction and pull box electrical applications. Heavy duty 16 ga... welded steel construction. Screwed on flat cover with key holes for easy assembly. Four wall mounting holes in back. Embossed grounding hole in bottom allows easy access and flush wall mounting. Durable ANSI65 grey powder coating. Complies with NEMA and UL type 1 rating. Ul listing pending. Ratings : NEMA 1. 32.0" Area (length by width). Cover included design. Wall mount features. read more

BUD Industries
$52.30
at Amazon

Continuous seam welded 16 gauge steel construction. Hinged cover clamps to the base with keyed quarter turn latch for a watertight... seal. External mounting brackets allow box to be mounted on a wall or panel without having to remove the cover and exposing internal components to the environment. Bonding studs for grounding are provided on base and door. Internal panel and hardware included. Designed to meet NEMA type 1, 2, 4, 4X and IP65 ratings. Hinged Door, Lid design. Interior Panel. Easily machined and modified to your particular requirements. Base measures 5-29/32" width by 7-55/64" height by 5-29/32" depth. read more

BUD Industries
$79.10
at Amazon

Continuous seam welded 16 gauge steel construction. Hinged cover clamps to the base with keyed quarter turn latch for a watertight... seal. External mounting brackets allow box to be mounted on a wall or panel without having to remove the cover and exposing internal components to the environment. Bonding studs for grounding are provided on base and door. Internal panel and hardware included. Designed to meet NEMA type 1, 2, 4, 4X and IP65 ratings. UL Listed. Hinged Door, Lid design. Interior Panel. Easily machined and modified to your particular requirements. Base measures 11-51/64" width by 11-51/64" height by 7-55/64" depth. read more

BUD Industries
$59.40
at Amazon

Designed to meet NEMA 1, 2, 4, 4X, 12, 13 and IP65 ratings. UL listed to UL508-4X requirements (pending). Continuous seam welded 1...6 gauge steel construction. Screw mounted lift-off cover facilitates machining and assembly of components. Bonding studs for grounding are provided on base and door. Easily machined and modified to your particular requirements. Includes stainless steel wall mounting bracket kit. Includes 14 gauge steel, zinc plated removable internal panel. Finish: smooth gray powder coat. Ratings : IP65, NEMA 1, 2, 4, 4X, UL508-4X. These boxes are similar to the popular SNB series boxes with the added feature of screw mounted lift-off cover allowing easy machining of holes/cutouts and assembly of components. Base measures 7-55/64" width by 9-53/64" height by 5-29/32" depth. read more

BUD Industries
$167.90
at Amazon

Made from durable 14 gauge steel (1/16" thick). Smooth continuous welded seams. External mounting brackets allow the box to be mou...nted on a wall or panel without having to remove the cover and exposing internal components to the environment. Hinged cover clamps to the base with stainless steel brackets and steel screws for a watertight seal. Weld nuts for inner panel mounting. Bonding studs for grounding are provided on base and door. Easily machined and modified to your particular requirements. Internal panel and hardware included. Tested and listed to UL-508 Type 4x requirements (UL File #E194432). Finish: Smooth gray powder coat. Hinged Door, Lid design. Interior Panel. These sheet metal boxes meet NEMA 1, 2, 4, 4X, 12, 13, and IP65 ratings and can be mounted without need to remove cover and expose internal components. Base measures 16.00" length by 14.00" width by 10" height. read more

BUD Industries
$64.20
at Amazon

Designed to meet NEMA 1, 2, 4, 4X, 12, 13 and IP65 ratings. UL listed to UL508-4X requirements (pending). Continuous seam welded 1...6 gauge steel construction. Screw mounted lift-off cover facilitates machining and assembly of components. Bonding studs for grounding are provided on base and door. Easily machined and modified to your particular requirements. Includes stainless steel wall mounting bracket kit. Includes 14 gauge steel, zinc plated removable internal panel. Finish: smooth gray powder coat. Ratings : IP65, NEMA 1, 2, 4, 4X, UL508-4X. These boxes are similar to the popular SNB series boxes with the added feature of screw mounted lift-off cover allowing easy machining of holes/cutouts and assembly of components. Base measures 9-53/64" width by 11-51/64" height by 5-29/32" depth. read more

BUD Industries
$20.60
at Amazon

Small metal electronics enclosures. 0.040" aluminum alloy. Two sections slip together and may be joined by either built in snap lo...ck or sheet metal screws (included). Flanged sections assure proper shielding. Units can be used as separate housings or as part of larger assemblies. Measures 6" length by 5" width by 4" height. read more

BUD Industries
$133.50
at Amazon

Strong and stylish extruded aluminum body a with plastic front and rear bezels. Removable front and rear panels with protective fi...lm allow for easy scratch free machining. Adjustable locking aluminum and plastic handle allows for multi-positional carrying and bench top use. Extruded internal grooves for horizontal mounting of circuit board, chassis, or panel. Four scuff resistant antiskid feet; front feet feature foldable bails. 107" Area (length by width). read more

BUD Industries
$55.30
at Amazon

High impact ABS molded enclosures meet NEMA specifications and ideal for PCB enclosures, junction boxes and other applications in ...the electrical and electronic industries. Style 3 - (For indoor use only) dark gray ABS body and cover. Body/Cover - UL94-HB flammability rating, suggested service temperature 0C to 80C.Designed to IP66 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications. UL listed. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. Internal guide slots for mounting PCB assemblies vertically. Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330). Cover screws are m-4 stainless steel, non-magnetic and fasten into threaded brass inserts. Gasket material: silicon sponge. Cover included design. External measures 14-5/32" length by 7-55/64" width by 5-29/32" height; internal measures 13-27/32" length by 7-35/64" width by 5-5/8" height. read more

BUD Industries
$20.50
at Amazon

These heavy duty steel boxes are well suited for a variety of junction and pull box and many other electrical application. These b...oxes have a hinged cover with slotted-head quarter-turn cam lock. Heavy duty 16 ga welded steel construction. Hinged cover with slotted-head quarter-turn cam lock. Easily removable concentric knockouts on all four sides for industry standard conduit sizes. 3? Depth box do not have knockouts on hinge side. Four wall mounting holes in back. Embossed grounding hole in bottom allows easy access and flush wall mounting. Durable ANSI 65 grey powder coating. Complies with NEMA and UL type 1 rating. Ul listing pending. Ratings: NEMA 1. 32.0" Area (length by width). Hinged door, lid design. Knockouts, wall mount features. read more

BUD Industries
$58.70
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. UL listed to UL508-4x requirements. PC/PBT blended plastic enc...losures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries
$66.50
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. UL listed to UL508-4x requirements. ABS plastic enclosures are... molded out of light gray material with UL94-HB flammability rating.(not ul listed). ABS/PC blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating. Suggested service temperature range -40 degrees Celsius. to +70 degrees Celsius. Clear doors, for all models, are molded out of polycarbonate material with UL94-V0 flammability rating. read more

BUD Industries
$43.00
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. All plastic construction including hinge pins. Complete with s...tainless steel wall mounting brackets and hardware. Style A has two or three plastic latches. ABS/PC blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating. Suggested service temperature range -40 degrees Celsius to +70 degrees Celsius. Clear doors, for all models, are molded out of polycarbonate material with UL94-V0 flammability rating. read more

BUD Industries
$53.70
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. All plastic construction including hinge pins. Complete with s...tainless steel wall mounting brackets and hardware. Style A has two or three plastic latches. ABS/PC blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating. Suggested service temperature range -40 degrees Celsius to +70 degrees Celsius. Clear doors, for all models, are molded out of polycarbonate material with UL94-V0 flammability rating. read more

BUD Industries
$111.80
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. UL listed to UL508-4x requirements. ABS plastic enclosures are... molded out of light gray material with UL94-HB flammability rating. Not ul listed. ABS/PC blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating. Suggested service temperature range -40 degrees Celsius to +70 degrees Celsius. Clear doors, for all models, are molded out of polycarbonate material with UL94-V0 flammability rating. read more

BUD Industries
$38.85
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. All plastic construction including hinge pins. Complete with s...tainless steel wall mounting brackets and hardware. Style A has two or three plastic latches. PC/PBT blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries
$43.10
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. All plastic construction including hinge pins. Complete with s...tainless steel wall mounting brackets and hardware. Style A has two or three plastic latches. PC/PBT blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries
$49.75
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. All plastic construction including hinge pins. Complete with s...tainless steel wall mounting brackets and hardware. Style A has two or three plastic latches. PC/PBT blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries
$17.70
at Amazon

Used in combination with customer supplied padlock to secure enclosures against entry. Kit comes complete with hasp, gasket and al...l mounting ardware.Locking hasp kit. read more

BUD Industries
$107.55
at Amazon

Sliding shelves come in widths that either fit 19" or 24" wide panel spaces and all cabinet rack depths. Shelves are 16-gauge stee...l and flanged on all four sides for added support. Universal mounting brackets allow flexibility in mounting. Shelves allow sufficient room in rear for cables and power outlet strips. Requires two pairs of panel mounting rails per cabinet rack. 17" maximum clear inside depth. Travel: 8". read more

BUD Industries
$105.60
at Amazon

Sliding shelves come in widths that either fit 19" or 24" wide panel spaces and all cabinet rack depths. Shelves are 16-gauge stee...l and flanged on all four sides for added support. Universal mounting brackets allow flexibility in mounting. Shelves allow sufficient room in rear for cables and power outlet strips. Requires two pairs of panel mounting rails per cabinet rack. 17" maximum clear inside depth. Travel: 8". read more

BUD Industries
$119.05
at Amazon

Sliding shelves come in widths that either fit 19" or 24" wide panel spaces and all cabinet rack depths. Shelves are 16-gauge stee...l and flanged on all four sides for added support. Universal mounting brackets allow flexibility in mounting. Shelves allow sufficient room in rear for cables and power outlet strips. Requires two pairs of panel mounting rails per cabinet rack. 24" maximum clear inside depth. Travel: 15". read more

BUD Industries
$69.20
at Amazon

Polycarbonate molded enclosures meet NEMA specifications and ideal for PCB enclosures, junction boxes and other applications in th...e electrical and electronic industries. Style 2 - Light gray polycarbonate body and clear polycarbonate cover. Body/Cover - UV stabilized UL94-HB flammability rating suggested service temperature -40C to 120C. Designed to IP66 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications. UL listed. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. Internal guide slots for mounting PCB assemblies vertically. Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330). Cover screws are m-4 stainless steel, non-magnetic and fasten into threaded brass inserts. Gasket material: silicon sponge. Cover included design. External measures 11-51/64" length by 9-3/64" width by 3-3/8" height; internal measures 11-9/16" length by 8-13/16" width by 3-7/64" height. read more

BUD Industries
$136.45
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. All plastic construction including hinge pins. Complete with s...tainless steel wall mounting brackets and hardware. Style A has two or three plastic latches. PC/PBT blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries
$21.30
at Amazon

Polycarbonate molded enclosures meet NEMA specifications and ideal for PCB enclosures, junction boxes and other applications in th...e electrical and electronic industries. Style 1 - Light gray polycarbonate body and cover. Body/Cover - UV stabilized , UL94-HB flammability rating, suggested service temperature -40C to 120C. Designed to IP66 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications. UL listed. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. Internal guide slots for mounting PCB assemblies vertically. Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330). Cover screws are m-4 stainless steel, non-magnetic and fasten into threaded brass inserts. Gasket material: silicon sponge. Cover included design. External measures 6-23/32" length by 4-3/4" width by 3-9/64" height; internal measures 6-23/64" length by 4-25/64" width by 2-29/32" height. read more

BUD Industries
$19.40
at Amazon

Polycarbonate molded enclosures meet NEMA specifications and ideal for PCB enclosures, junction boxes and other applications in th...e electrical and electronic industries. Style 2 - Light gray polycarbonate body and clear polycarbonate cover. Body/Cover - UV stabilized UL94-HB flammability rating suggested service temperature -40C to 120C. Designed to IP66 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications. UL listed. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. Internal guide slots for mounting PCB assemblies vertically. Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330). Cover screws are m-4 stainless steel, non-magnetic and fasten into threaded brass inserts. Gasket material: silicon sponge. Cover included design. External measures 6-23/32" length by 4-3/4" width by 2-5/32" height; internal measures 6-23/64" length by 4-25/64" width by 1-59/64" height. read more

BUD Industries
$88.35
at Amazon

Designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. All plastic construction including hinge pins. Complete with s...tainless steel wall mounting brackets and hardware. Style A has two or three plastic latches. PC/PBT blended plastic enclosures are molded out of light gray material with UL94-5VA flammability rating and UV stabilized. read more

BUD Industries
$18.80
at Amazon

Polycarbonate molded enclosures meet NEMA specifications and ideal for PCB enclosures, junction boxes and other applications in th...e electrical and electronic industries. Style 1 - Light gray polycarbonate body and cover. Body/Cover - UV stabilized , UL94-HB flammability rating, suggested service temperature -40C to 120C. Designed to IP66 of IEC 529 and NEMA 1, 2, 4, 4x, 12, and 13 specifications. UL listed. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing ingress of moisture and dust. Internal guide slots for mounting PCB assemblies vertically. Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts (except PN-1320 and PN-1330). Cover screws are m-4 stainless steel, non-magnetic and fasten into threaded brass inserts. Gasket material: silicon sponge. Cover included design. External measures 7-43/64" length by 3-9/64" width by 2-5/32" height; internal measures 7-25/64" length by 2-55/64" width by 1-59/64" height. read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping