BrassCraft BrassCraft 0.31-in x 0.06-in Rubber Faucet O-Ring

0.31-in x 0.06-in Rubber Faucet O-Ring For Amer Stand, Kohler, Speakman 3/16" I.D. X 5/16" O.D. X 1/16" Wall 2 per card Nitrile Butadiene

BrassCraft

BrassCraft?s Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provi...de a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Our stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. California residents: seeProposition 65 information 1/2 in. I.D. (5/8 in. O.D.) corrugated stainless steel with corrosion resistant coating Safety+PLUS excess flow valve protects against gas fires and explosions - 5/8 in. female flare connection to gas supply or gas ball valve Safety+PLUS valve ideal for most common household gas appliances Safety+PLUS valve features automatic activation and reset Safety+PLUS valve is 100% factory performance tested Safety+PLUS valve installs like a standard gas fitting; can be installed in vertical or horizontal position ProCoat coating resistant to ammonia, chlorine, solder flux, muriatic acid, as well as UV rays and salt Use with natural and liquefied petroleum (LP or propane) gases Gas connector is 100% leak tested Approved for indoor and outdoor use Temperature rating: 32° F to 150° F Pressure rating: 1/2 psi maximum Designed, machined and assembled in the USA CSA certified You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site. SPECIFICATIONS Assembled Depth (in.) 1.250 in Assembled Height (in.) 49.220 in Assembled Width (in.) 1.250 in Certifications and Listings CSA Certified Connection type Flare x MIP Gas Vent Pipe and Fittings Accessory Type Gas Appliance Connector Inner diameter (in.) 0.5 Inner material Stainless steel Manufacturer Limited Manufacturer Maximum pressure (psi) 0.5 Maximum working temperature (F) 150 Minimum working temperature (F) 32 Outer diameter (in.) 0.625 Outer material Stainless steel Product Height (in.) 1.250 in Product Length (in.) 49.220 in Product Weight (lb.) 1.2745 lb Product Width (in.) 1.250 in Returnable 90-Day CUSTOMERS WHO VIEWED THIS ITEM PURCHASED... $31.83Quick CouplingAdd to cart$10.76Speedi-Products 4 in. x 24 in. B-Vent Round PipeAdd to cart$11.23Speedi-Products 4 in. B-Vent 45-Degree Round... Add to cart$22.58Speedi-Products 5 in. x 60 in. B-Vent Round Pipe(1) Add to cart$11.27Speedi-Products 5 in. B-Vent 90-Degree Round... (1) Add to cart CUSTOMER REVIEWS Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a Review Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a ReviewIf you have questions or comments regarding the customer service you received please contact us. SHIPPING OPTIONS Most orders process within 3 business days. Please allow 3 to 5 business days for Standard Shipping in addition to order processing time, which varies by product. Items deliver by small parcel service. If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply. This item is also available for pick up in your local store (FREE) within 4-7 bu read more

BrassCraft

Designed for most sink, shower and tub drains, this BrassCraft 1/4 in. x 25 ft. Power Pistol-Grip Drum Auger can be operated manua...lly or with an attached drill motor (not included). It features a center-balanced pistol grip that helps improve control and offers a comfortable operation. The auger's quick-lever cable lock provides fast, simple and secure cable adjustments. Great for clearing stubborn clogs. For most sink, shower and tub drains Use to clear 1-1/4 in. - 2 in. lines 25 ft. cable with 1/4 in. diameter provides adequate reach into drains helping clear household clogs High-impact polymer housing for durability Quick-lever cable lock provides easy cable adjustments and securely locks the cable Can be operated manually or with a drill motor attached adding extra power for stubborn clogs (motor not included) Center-balanced pistol grip keeps the weight of the cable over your wrist for a comfortable operation and better control Rubber over-mold in the pistol-grip handle helps minimize hand fatigue and enhance comfort during operation Screw construction Safe, reliable and easy use You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site. SPECIFICATIONS Assembled Depth (in.) 22.25 in Assembled Height (in.) 6.75 in Assembled Width (in.) 20.125 in Auger Type Other Cable diameter (in.) .25 Cable length (ft.) 25 Manufacturer One year limited warranty Maximum pipe size cleared (in.) 2 Minimum pipe size cleared (in.) 1.25 Power Source Manual Powered cable feed No Returnable 90-Day Winding drum Yes CUSTOMERS WHO VIEWED THIS ITEM PURCHASED... $3.95Original FlexiSnake Hair Clog Tool(7) Add to cart$9.13Drain Millipede Hair Clog Tool(7) Add to cart$12.56Drain Weasel Plus Hair Clog Tool Starter Kit(3) Add to cart$29.99Johnny Jolter Professional Power Plunger(5) Add to cart$119.64NaturalAire 20 in. x 25 in. x 1 in. Best FPR 8... (18) Add to cart CUSTOMER REVIEWS Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a Review Write a Review Click on filters to refine your results. Ratings summary Overall rating 4.1 out of 5.0 65 reviews 5(38)4(15)3(2)2(1)1(9)Ease of installation 4.5 out of 5.0 Quality 4.0 out of 5.0 Value 4.3 out of 5.0 Customer Images Previous Next 2Page1 of 1 CloseDrill poweredPrevious Next photo1of1 Drill poweredphoto from customer review Overall 4 out of 5It works!February 25, 2013BymilehighfromDenver, CO, USAI was skeptical, but I bought anyway. I took it to my worst drain. And it worked as advertised. That 50 year old drain now works again. The rest of... (Show full review)Read this review 82% of customersrecommend this product50 of 61reviewsRead All Reviews (65)82%of customersrecommend this product50 of 61reviewsRating Breakdown 65 reviews4.1 out of 5.0 5(38)4(15)3(2)2(1)1(9)Ease of installation 4.5 out of 5.0 Quality 4.0 out of 5.0 Value 4.3 out of 5.0 Write a Review Filter Reviews by: Rating, Profile, Gender, Age(65) Filter Reviews by: Rating, Profile, Gender, Age(65) and Star Rating 5 Stars(38)or 4 Stars(15)or 3 Stars(2)or 2 Stars(1)or 1 Star(9)orMoreFewer and Home Improvement Profile DIYer(34)or Professional(5)or Other(2)orMoreFewer and Gender Male(34)or Female(8)orMoreFewer and Age Range 17 or under(0)or 18 to 24(1)or 25 to 34(4)or 35 to 44(13)or 45 to 54(12)or 55 to 64(11)or 65 or over(2)orMoreFewer Click on filters to refine your results. Product ReviewsWrite a Review Search reviews: SearchSort By: Most relevant Featured reviews Top contributors Photo reviews Video reviews Newest Oldest Highest rating Lowest rating Most helpful Longest Shortest What is relevancy sort?Most Relevant puts the best reviews at the top. We choose the order based on helpfulness votes, latest reviews, pictures and other traits that readers look for in their reviews. DKR58 from Portland, OR, USA Age Range:55 to 64, Gender:MaleHome Improvement Profile:Professional Pr read more

BrassCraft

Corrosion is no match for BrassCraft?s COPPER-FLEX water heater connectors. Constructed of seamless copper tubing, COPPER-FLEX wat...er heater connectors are the professional?s choice for water heater installations. Featuring an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks. In addition, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs. California residents: seeProposition 65 information Corrugated copper tube 7/8 in. O.D. x 15 in. L End connections: 3/4 in. FIP nuts, both ends No dielectric union needed, the integrated dielectric sleeve eliminates the potential for corrosion and the need to install an additional dielectric union Requires less torque to seal with a pliable nitrile rubber washer, especially on rough nipple surfaces Use with electric or gas water heaters or softeners, use only to connect water Engineered and tested for harsh water conditions Temperature rating: 40° to 180° F (NSF61 maximum 82° C) Pressure rating: 125 psi maximum Designed, machined and assembled in the USA CSA and IAPMO certified NSF 61 and no-lead certified You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site. SPECIFICATIONS Assembled Depth (in.) 1.125 in Assembled Height (in.) 16.570 in Assembled Width (in.) 1.125 in Finish Family Bronze/Copper Metallic Manufacturer Limited Manufacturer Product Depth (in.) 16.570 in Product Height (in.) 1.125 in Product Length (in.) 16.570 in Product Type Supply Line WH Product Weight (lb.) 0.4523 lb Product Width (in.) 1.125 in Returnable 90-Day ONLINE BEST SELLERS $39.94Lutron Maestro Single Pole Occupancy Motion... (67) Add to cartSAVE $59.70$139.30 WAS $199.004-Shelf 77 in. W x 73 in. H X 24 in. D Steel Shel(83) Add to cartSAVE $499.50$499.50 WAS $999.00Hampton Bay Westbury 7-Piece Patio High Dining Set(151) Add to cart$189.00GE 5.0 cu. ft. Chest Freezer in White(1115) Add to cart$449.00Admiral 6.5 cu. ft. Electric Dryer in White(484) Add to cart CUSTOMER REVIEWS Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a Review Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a ReviewIf you have questions or comments regarding the customer service you received please contact us. SHIPPING OPTIONS Most orders process within 3 business days. Please allow 3 to 5 business days for Standard Shipping in addition to order processing time, which varies by product. Items deliver by small parcel service. If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply. This item is also available for pick up in your local store (FREE) within 4-7 business days, plus order processing time. read more

BrassCraft
$51.99 $76.00
at Wayfair

Features: Gas dryer kit 48" Coated gas connecter 0.75" Male thread (tapped 0.5": female) inlet automatic gas shutoff valve 0.75" M...ale thread steel adapter 0.5" Male thread steel adapter Made in the USA Show Additional Info Dimensions: Overall Product Weight: 1.4 Pounds read more

BrassCraft

The BrassCraft Gas Log Fireplace Installation Kit contains everything you need to connect most gas log fireplaces, decorative stov...es and space heaters to your gas supply. BrassCraft?s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available. Includes easy-to-read installation instructions. 1/2 in. O.D. x 24 in. L corrugated stainless-steel gas connector with ProCoat coating Connector coating resistant to prolonged exposure to harsh household chemicals, UV rays and salt Gas connector coated in black finish to make the connector virtually invisible. Ideal for gas log fireplaces and decorative hearths Includes multiple steel fittings to fit most gas appliance inlets - (1) 1/2 in. MIP (with 3/8 in. FIP tap) fitting, (1) 1/2 in. FIP fitting, and (1) 3/8 in. MIP fitting Fits all current and most older gas log fireplaces, decorative stoves and space heaters Leak detection solution and pipe thread sealant included Use with natural and liquefied petroleum (LP or propane) gases 100% leak tested Approved for indoor and outdoor use Temperature rating: -40° to 150° F Pressure rating: 1/2 psi maximum Designed, machined and assembled in the USA CSA certified You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site. SPECIFICATIONS Assembled Depth (in.) 1.250 in Assembled Height (in.) 9.000 in Assembled Width (in.) 1.250 in Certifications and Listings CSA Certified Connection type FIP x MIP Gas Vent Pipe and Fittings Accessory Type Gas Appliance Connector Inner diameter (in.) 0.375 Inner material Stainless steel Manufacturer Limited Manufacturer Maximum pressure (psi) 0.5 Maximum working temperature (F) 150 Minimum working temperature (F) -40 Outer diameter (in.) 0.5 Outer material Stainless steel Product Height (in.) 1.250 in Product Length (in.) 9.000 in Product Weight (lb.) 0.7085 lb Product Width (in.) 1.250 in Returnable 90-Day CUSTOMER REVIEWS Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a Review Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a ReviewIf you have questions or comments regarding the customer service you received please contact us. SHIPPING OPTIONS Most orders process within 3 business days. Please allow 3 to 5 business days for Standard Shipping in addition to order processing time, which varies by product. Items deliver by small parcel service. If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply. This item is also available for pick up in your local store (FREE) within 4-7 business days, plus order processing time. read more

BrassCraft
$51.24 $75.50
at Wayfair

Features: Gas furnace kit 48" Coated gas connector 0.5": Male thread (tapped 0.37" female flare) inlet automatic gas shutoff valve... 0.5" Male thread steel adapter 0.5" Female thread steel adapter Made in the USA Show Additional Info Dimensions: Overall Product Weight: 1.71 Pounds read more

BrassCraft
$16.11-$20.85 $21.84
at Wayfair

Features: Female nut x female nut 0.75" FPS x 0.75" FPS Made in the USA

BrassCraft

BrassCraft 3-1/2 in. Garbage Disposal Flange is constructed of brass for durability and lasting performance. Attractive Satin Nick...el finish is a perfect complement to Kitchen decor. Fits InSinkerator, KitchenAid, Emerson, Kenmore, and Grainger garbage disposals. 3-1/2 in. garbage disposal flange Durable brass construction Use with InSinkerator, KitchenAid, Emerson, Kenmore, and Grainger garbage disposals Satin nickel finish You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site. SPECIFICATIONS Assembled Depth (in.) 2.000 in Assembled Height (in.) 5.125 in Assembled Width (in.) 5.125 in Color Family Nickel Inside Diameter 1-3/4 Manufacturer Limited Manufacturer Material Brass Outside Diameter 3-1/2 Plumbing Part Type Escutcheon/Flange Product Height (in.) 2.000 in Product Length (in.) 5.125 in Product Type Flange Product Width (in.) 5.125 in Returnable 90-Day SUGGESTIONS BASED ON YOUR RECENTLY VIEWED ITEMS SAVE $54.90$494.10 WAS $549.005.0 cu. ft. Gas Range with Self-Cleaning Oven in (65) Add to cart$17.08MOEN Chateau Escutcheon in Chrome for... (16) Add to cart$17.51Brasstech 1-1/4 in. O.D. High Box Flange in... Add to cartSAVE $9.53$85.75 WAS $95.28Delta Shower Renovation Cover Plate in Bronze(3) Add to cart$6.55American Standard Escutcheon for Colony Bath and... Add to cart CUSTOMER REVIEWS Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a Review Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a ReviewIf you have questions or comments regarding the customer service you received please contact us. SHIPPING OPTIONS Most orders process within 3 business days. Please allow 3 to 5 business days for Standard Shipping in addition to order processing time, which varies by product. Items deliver by small parcel service. If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply. This item is also available for pick up in your local store (FREE) within 4-7 business days, plus order processing time. read more

BrassCraft

BrassCraft Garbage Disposal Stopper for 3-1/2 in. Flange is constructed of brass for durability and lasting performance. Attractiv...e Satin Nickel finish is a perfect complement to Kitchen decor. Fits InSinkerator, KitchenAid, Emerson, Kenmore, and Grainger garbage disposals. Garbage disposal stopper for 3-1/2 in. flange Durable brass construction Use with InSinkerator, KitchenAid, Emerson, Kenmore, and Grainger garbage disposals Satin nickel finish You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site. SPECIFICATIONS Assembled Depth (in.) 3.125 in Assembled Height (in.) 3.000 in Assembled Width (in.) 3.000 in Color Family Nickel Inside Diameter 1-3/4 Manufacturer Limited Manufacturer Material Brass Outside Diameter 3-1/2 Plumbing Part Type Escutcheon/Flange Product Height (in.) 3.125 in Product Length (in.) 3.000 in Product Type Flange Product Width (in.) 3.000 in Returnable 90-Day CUSTOMERS WHO VIEWED THIS ITEM PURCHASED... $30.53KOHLER Forte Diverter Bath Spout in Brushed Chrome(1) Add to cart$52.99KOHLER San Raphael Trip Lever in Vibrant... Add to cart$130.28KOHLER 1-1/4 in. x 1-1/4 in. Brass Slip x Slip... Add to cart$17.08MOEN Chateau Escutcheon in Chrome for... (16) Add to cartSAVE $2.30$20.70 WAS $23.00Delta Shower Arm Flange in Venetian Bronze(1) Add to cart CUSTOMER REVIEWS Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a Review Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a ReviewIf you have questions or comments regarding the customer service you received please contact us. SHIPPING OPTIONS Most orders process within 3 business days. Please allow 3 to 5 business days for Standard Shipping in addition to order processing time, which varies by product. Items deliver by small parcel service. If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply. This item is also available for pick up in your local store (FREE) within 4-7 business days, plus order processing time. read more

BrassCraft

The 3/8 in. Comp. x 3/8 in. Comp. x 20 in. Polymer Braid Dishwasher Connector has a reinforced inner core to resist chlorine and c...hloramine leaching and deterioration. For greater dependability, the ends have an 8-Sided pneumatic crimp. California residents: seeProposition 65 information Reinforced inner core with braided polymer-coated fibers More flexible than stainless steel Maximum pressure 125 PSI Corrosion resistant to cleaning and plumbing chemicals 8-Sided pneumatic crimp provides greater dependability for reliable nut-to-hose connection Nitrile rubber washers provide a long lasting water tight connection Note: Product may vary by store. Note: Product may vary by store. You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site. SPECIFICATIONS Assembled Depth (in.) .87500 in Assembled Height (in.) 20.375 in Assembled Width (in.) 0.875 in Certifications and Listings No Certifications or Listings Color Family Silver Color/Finish Family Silver Fitting material Brass Inlet Size 3/8 In. Manufacturer Limited manufacturer warrenty Maximum Pressure (PSI) 125 Outlet Size 3/8 In. Plumbing Part Type Supply Line Product Length (in.) 20 in Returnable 90-Day Tube Diameter (in.) 0.3 CUSTOMERS WHO VIEWED THIS ITEM PURCHASED... $7.883/8 in. Compression x 3/8 in. OD Copper Tube x 20(6) Add to cart$8.94BrassCraft 3/8 in. Compression x 1/2 in. FIP x... (80) Add to cart$6.88BrassCraft 3/8 in. Compression x 1/2 in. FIP x... (80) Add to cart$5.28BrassCraft 3/8 in. Compression x 1/2 in. FIP x... (80) Add to cart$6.981/2 in. FIP x 1/2 in. FIP x 20 in. Polymer Braid (4) Add to cart CUSTOMER REVIEWS Do you own this product? Be the first to rate it. Your feedback will help users like you to make informed decisions and will help us to improve our product offerings! Write a Review Write a Review Click on filters to refine your results. Ratings summary Overall rating 5.0 out of 5.0 1 review 5(1)4(0)3(0)2(0)1(0)Read All Reviews (1)Rating Breakdown 1 review5.0 out of 5.0 5(1)4(0)3(0)2(0)1(0)Write a Review Filter Reviews by: Rating, Profile, Gender, Age(1) Filter Reviews by: Rating, Profile, Gender, Age(1) and Star Rating 5 Stars(1)or 4 Stars(0)or 3 Stars(0)or 2 Stars(0)or 1 Star(0)orMoreFewer and Home Improvement Profile DIYer(0)or Professional(0)or Other(0)orMoreFewer and Gender Male(0)or Female(0)orMoreFewer and Age Range 17 or under(0)or 18 to 24(0)or 25 to 34(0)or 35 to 44(0)or 45 to 54(0)or 55 to 64(0)or 65 or over(0)orMoreFewer Click on filters to refine your results. Product ReviewsWrite a ReviewRecentlyRetired Works wellPostedOctober 4, 2011Overall rating 5.0 out of 5.0 Verified Purchase We purchased 2 connectors for a lavatory sink in our laundry room. The connectors look good and works well. They replace existing PEX connectors installed by the builder. Similar PEX connectors have leaked and caused significant water danage to one of our neighboors' home. We hope that these polymer braidconnectors will last for a while. 0points 0out of 0found this review helpful. Was this helpful?helpful0unhelpful0http://homedepot.ugc.bazaarvoice.com/1999m/100621651/review/16583206/undohelpfulness.djs?format=embeddedhtmlandsessionparams=__BVSESSIONPARAMS__andreturn=http%3A%2F%2Fwww.homedepot.com%2Fp%2FUnbranded-3-8-in-Compression-x-3-8-in-Compression-x-20-in-Polymer-Braid-Dishwasher-Water-Connector-B1-20DW-F%2F100621651andinnerreturn=http%3A%2F%2Fhomedepot.ugc.bazaarvoice.com%2F1999m%2F100621651%2Freviews.djs%3Fformat%3Dembeddedhtmlanduser=__USERID__andauthsourcetype=__AUTHTYPE__andsubmissionparams=__BVSUBMISSIONPARAMETERS__andsubmissionurl=__BVSUBMISSIONURL__Report inappropriate content SHIPPING OPTIONS Cost Saver Shipping includes initial transportation by small parcel service, with final delivery made by U.S. Postal Service. Tracking information may be limited. Orders for this item may be expedited for an additional fee. Other Delivery Options: Standard Shipping includes delivery by small parcel service. Processing time read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping