ARCOS Arcos 6-Inch 150 mm 2900 Range Chef's Knife, Yellow

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of knives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, m...eat and fish, the Arcos 2900 range 6-inch Chef knife yellow colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

related
ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 6-inch Chef knife yellow colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS
$24.87
at Amazon

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 6-inch Chef knife red colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS
$24.87
at Amazon

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 6-inch Chef knife blue colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 6-inch Chef knife blue colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 6-inch Chef knife red colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 6-inch Chef knife black colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS
$22.65-$32.71
at Amazon

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full color handle range of kn...ives 100-Percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 10-Inch Chef knife yellow color handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full color handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power ( over 100 mm ) and long edge retention ( over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS
$28.83-$31.90
at Amazon

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full color handle range of kn...ives 100-Percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 8-Inch Chef knife yellow color handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full color handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power ( over 100 mm ) and long edge retention ( over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full color handle range of kn...ives 100-Percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 8-Inch Chef knife yellow color handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full color handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power ( over 100 mm ) and long edge retention ( over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

Designed and engineered for heavy use, the Arcos 2900 line of kitchen knives is ideal for both professional settings as well as ho...me kitchens. Made in Spain using an exclusive Arcos stainless steel formula called Nitrum, the blade of this 10-inch chef's knife (250 mm) is enriched with nitrogen for hardening and added durability. And this knife features an NSF-certified, full colored handle in yellow, which allows each knife to be identified for cutting a specific food. Full color handles idea for HACCP environments. In addition to being NSF approved, knives from the Arcos 2900 range are ideal for HACCP environments that require a color coding system to keep utensils used on meat, fish, and vegetables separated. Safe and comfortable, the handle is made from injected polypropylene (PP), with a seamless joint between handle and blade thanks to the injection process. The handle won't slip out of your hands, and it's also resistant to impact and high temperatures (up to 260 degrees F). Dishwasher safe, though hand washing is recommended. Arcos Nitrum Stainless Steel Nitrum is a nitrogen-enriched, stainless steel formula that's found exclusively in Arcos knives. With Nitrum stainless steel, your Arcos knife will possess improved hardness for a longer lasting sharpness, enhanced microstructure for higher resistance to corrosion, and exceptional edge durability for longer periods between re-sharpening. The Nitrum production process has no negative effect on the air, water, or soil. How to Correctly Sharpen Your Arcos Knife Arcos recommends the regular use of a sharpening steel to keep the cutting edge of your knife razor sharp. Place the blade of the knife on the steel at a 20 degree angle. Keep the arm that is holding the steel steady and swipe the blade lightly over the steel keeping the angle at 20 degrees. Give each side of the knife an equal number of swipes (about 20). Sharpen the other side of the blade as before, this time using the other side of the honing steel. And remember to always protect your fingers. See larger image. Tips For Use and Maintenance Wash knives immediately after use with a mild soap. Avoid prolonged contact with leftover food. Do not use bleach, soda or detergents containing chlorine or chlorides ions because they rust the steel and may cause it to lose its shine. Avoid rubbing your knives with abrasive products, hard cloths, and metallic or synthetic cleaners. If you use a dishwasher, place your knives in with the blades facing up and in separate containers from the rest of your cutlery to avoid scratching. Avoid leaving your knives submerged in water for long periods of time, especially in hard or salty water that can affect metals. Dry immediately with a soft cloth. Leaving your knives to dry in the dishwasher is not recommended. About Arcos Arcos is a leading Spanish knife manufacturer and one of the oldest knife and cutlery manufacturers in the world. In 1745, Don Juan de Arcos started hand-crafting the first knives and scissors marked with the Arcos brand, and many of these pieces are displayed in the National Museum of Archeology of Madrid. Gregorio Arcos Aroca turned the small hand-crafted workshop into a mass-production factory for professional knives in 1875. And a century later, Gregorio Arcos Villanueva started the international expansion of the company. Today, Arcos is still a family owned business and proud of its remarkable heritage. To learn more about the history of Arcos, see this larger timeline image. read more

ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 8-inch chef knife brown colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

Designed and engineered for heavy use, the Arcos 2900 line of kitchen knives is ideal for both professional settings as well as ho...me kitchens. Made in Spain using an exclusive Arcos stainless steel formula called Nitrum, the blade of this 10-inch chef's knife (250 mm) is enriched with nitrogen for hardening and added durability. And this knife features an NSF-certified, full colored handle in black, which allows each knife to be identified for cutting a specific food. Full color handles idea for HACCP environments. In addition to being NSF approved, knives from the Arcos 2900 range are ideal for HACCP environments that require a color coding system to keep utensils used on meat, fish, and vegetables separated. Safe and comfortable, the handle is made from injected polypropylene (PP), with a seamless joint between handle and blade thanks to the injection process. The handle won't slip out of your hands, and it's also resistant to impact and high temperatures (up to 260 degrees F). Dishwasher safe, though hand washing is recommended. Arcos Nitrum Stainless Steel Nitrum is a nitrogen-enriched, stainless steel formula that's found exclusively in Arcos knives. With Nitrum stainless steel, your Arcos knife will possess improved hardness for a longer lasting sharpness, enhanced microstructure for higher resistance to corrosion, and exceptional edge durability for longer periods between re-sharpening. The Nitrum production process has no negative effect on the air, water, or soil. How to Correctly Sharpen Your Arcos Knife Arcos recommends the regular use of a sharpening steel to keep the cutting edge of your knife razor sharp. Place the blade of the knife on the steel at a 20 degree angle. Keep the arm that is holding the steel steady and swipe the blade lightly over the steel keeping the angle at 20 degrees. Give each side of the knife an equal number of swipes (about 20). Sharpen the other side of the blade as before, this time using the other side of the honing steel. And remember to always protect your fingers. See larger image. Tips For Use and Maintenance Wash knives immediately after use with a mild soap. Avoid prolonged contact with leftover food. Do not use bleach, soda or detergents containing chlorine or chlorides ions because they rust the steel and may cause it to lose its shine. Avoid rubbing your knives with abrasive products, hard cloths, and metallic or synthetic cleaners. If you use a dishwasher, place your knives in with the blades facing up and in separate containers from the rest of your cutlery to avoid scratching. Avoid leaving your knives submerged in water for long periods of time, especially in hard or salty water that can affect metals. Dry immediately with a soft cloth. Leaving your knives to dry in the dishwasher is not recommended. About Arcos Arcos is a leading Spanish knife manufacturer and one of the oldest knife and cutlery manufacturers in the world. In 1745, Don Juan de Arcos started hand-crafting the first knives and scissors marked with the Arcos brand, and many of these pieces are displayed in the National Museum of Archeology of Madrid. Gregorio Arcos Aroca turned the small hand-crafted workshop into a mass-production factory for professional knives in 1875. And a century later, Gregorio Arcos Villanueva started the international expansion of the company. Today, Arcos is still a family owned business and proud of its remarkable heritage. To learn more about the history of Arcos, see this larger timeline image. read more

ARCOS

Designed and engineered for heavy use, the Arcos 2900 line of kitchen knives is ideal for both professional settings as well as ho...me kitchens. Made in Spain using an exclusive Arcos stainless steel formula called Nitrum, the blade of this 10-inch chef's knife (250 mm) is enriched with nitrogen for hardening and added durability. And this knife features an NSF-certified, full colored handle in green, which allows each knife to be identified for cutting a specific food. Full color handles idea for HACCP environments. In addition to being NSF approved, knives from the Arcos 2900 range are ideal for HACCP environments that require a color coding system to keep utensils used on meat, fish, and vegetables separated. Safe and comfortable, the handle is made from injected polypropylene (PP), with a seamless joint between handle and blade thanks to the injection process. The handle won't slip out of your hands, and it's also resistant to impact and high temperatures (up to 260 degrees F). Dishwasher safe, though hand washing is recommended. Arcos Nitrum Stainless Steel Nitrum is a nitrogen-enriched stainless steel formula that's found exclusively in Arcos knives. With Nitrum stainless steel, your Arcos knife will possess improved hardness for a longer lasting sharpness, enhanced microstructure for higher resistance to corrosion, and exceptional edge durability for longer periods between re-sharpening. The Nitrum production process has no negative effect on the air, water, or soil. How to Correctly Sharpen Your Arcos Knife Arcos recommends the regular use of a sharpening steel to keep the cutting edge of your knife razor sharp. Place the blade of the knife on the steel at a 20 degree angle. Keep the arm that is holding the steel steady and swipe the blade lightly over the steel keeping the angle at 20 degrees. Give each side of the knife an equal number of swipes (about 20). Sharpen the other side of the blade as before, this time using the other side of the honing steel. And remember to always protect your fingers. See larger image. Tips For Use and Maintenance Wash knives immediately after use with a mild soap. Avoid prolonged contact with leftover food. Do not use bleach, soda or detergents containing chlorine or chlorides ions because they rust the steel and may cause it to lose its shine. Avoid rubbing your knives with abrasive products, hard cloths, and metallic or synthetic cleaners. If you use a dishwasher, place your knives in with the blades facing up and in separate containers from the rest of your cutlery to avoid scratching. Avoid leaving your knives submerged in water for long periods of time, especially in hard or salty water that can affect metals. Dry immediately with a soft cloth. Leaving your knives to dry in the dishwasher is not recommended. About Arcos Arcos is a leading Spanish knife manufacturer and one of the oldest knife and cutlery manufacturers in the world. In 1745, Don Juan de Arcos started hand-crafting the first knives and scissors marked with the Arcos brand, and many of these pieces are displayed in the National Museum of Archeology of Madrid. Gregorio Arcos Aroca turned the small hand-crafted workshop into a mass-production factory for professional knives in 1875. And a century later, Gregorio Arcos Villanueva started the international expansion of the company. Today, Arcos is still a family owned business and proud of its remarkable heritage. To learn more about the history of Arcos, see this larger timeline image. read more

ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full color handle range of kn...ives 100-Percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 8-Inch Chef knife black color handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full color handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power ( over 100 mm ) and long edge retention ( over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

Designed and engineered for heavy use, the Arcos 2900 line of kitchen knives is ideal for both professional settings as well as ho...me kitchens. Made in Spain using an exclusive Arcos stainless steel formula called Nitrum, the blade of this 8-inch chef's knife (200 mm) is enriched with nitrogen for hardening and added durability. And this knife features an NSF-certified, full colored handle in blue, which allows each knife to be identified for cutting a specific food. Full color handles idea for HACCP environments. In addition to being NSF approved, knives from the Arcos 2900 range are ideal for HACCP environments that require a color coding system to keep utensils used on meat, fish, and vegetables separated. Safe and comfortable, the handle is made from injected polypropylene (PP), with a seamless joint between handle and blade thanks to the injection process. The handle won't slip out of your hands, and it's also resistant to impact and high temperatures (up to 260 degrees F). Dishwasher safe, though hand washing is recommended. Arcos Nitrum Stainless Steel Nitrum is a nitrogen-enriched, stainless steel formula that's found exclusively in Arcos knives. With Nitrum stainless steel, your Arcos knife will possess improved hardness for a longer lasting sharpness, enhanced microstructure for higher resistance to corrosion, and exceptional edge durability for longer periods between re-sharpening. The Nitrum production process has no negative effect on the air, water, or soil. How to Correctly Sharpen Your Arcos Knife Arcos recommends the regular use of a sharpening steel to keep the cutting edge of your knife razor sharp. Place the blade of the knife on the steel at a 20 degree angle. Keep the arm that is holding the steel steady and swipe the blade lightly over the steel keeping the angle at 20 degrees. Give each side of the knife an equal number of swipes (about 20). Sharpen the other side of the blade as before, this time using the other side of the honing steel. And remember to always protect your fingers. See larger image. Tips For Use and Maintenance Wash knives immediately after use with a mild soap. Avoid prolonged contact with leftover food. Do not use bleach, soda or detergents containing chlorine or chlorides ions because they rust the steel and may cause it to lose its shine. Avoid rubbing your knives with abrasive products, hard cloths, and metallic or synthetic cleaners. If you use a dishwasher, place your knives in with the blades facing up and in separate containers from the rest of your cutlery to avoid scratching. Avoid leaving your knives submerged in water for long periods of time, especially in hard or salty water that can affect metals. Dry immediately with a soft cloth. Leaving your knives to dry in the dishwasher is not recommended. About Arcos Arcos is a leading Spanish knife manufacturer and one of the oldest knife and cutlery manufacturers in the world. In 1745, Don Juan de Arcos started hand-crafting the first knives and scissors marked with the Arcos brand, and many of these pieces are displayed in the National Museum of Archeology of Madrid. Gregorio Arcos Aroca turned the small hand-crafted workshop into a mass-production factory for professional knives in 1875. And a century later, Gregorio Arcos Villanueva started the international expansion of the company. Today, Arcos is still a family owned business and proud of its remarkable heritage. To learn more about the history of Arcos, see this larger timeline image. read more

ARCOS

Designed and engineered for heavy use, the Arcos 2900 line of kitchen knives is ideal for both professional settings as well as ho...me kitchens. Made in Spain using an exclusive Arcos stainless steel formula called Nitrum, the blade of this 10-inch chef's knife (250 mm) is enriched with nitrogen for hardening and added durability. And this knife features an NSF-certified, full colored handle in red, which allows each knife to be identified for cutting a specific food. Full color handles idea for HACCP environments. In addition to being NSF approved, knives from the Arcos 2900 range are ideal for HACCP environments that require a color coding system to keep utensils used on meat, fish, and vegetables separated. Safe and comfortable, the handle is made from injected polypropylene (PP), with a seamless joint between handle and blade thanks to the injection process. The handle won't slip out of your hands, and it's also resistant to impact and high temperatures (up to 260 degrees F). Dishwasher safe, though hand washing is recommended. Arcos Nitrum Stainless Steel Nitrum is a nitrogen-enriched stainless steel formula that's found exclusively in Arcos knives. With Nitrum stainless steel, your Arcos knife will possess improved hardness for a longer lasting sharpness, enhanced microstructure for higher resistance to corrosion, and exceptional edge durability for longer periods between re-sharpening. The Nitrum production process has no negative effect on the air, water, or soil. How to Correctly Sharpen Your Arcos Knife Arcos recommends the regular use of a sharpening steel to keep the cutting edge of your knife razor sharp. Place the blade of the knife on the steel at a 20 degree angle. Keep the arm that is holding the steel steady and swipe the blade lightly over the steel keeping the angle at 20 degrees. Give each side of the knife an equal number of swipes (about 20). Sharpen the other side of the blade as before, this time using the other side of the honing steel. And remember to always protect your fingers. See larger image. Tips For Use and Maintenance Wash knives immediately after use with a mild soap. Avoid prolonged contact with leftover food. Do not use bleach, soda or detergents containing chlorine or chlorides ions because they rust the steel and may cause it to lose its shine. Avoid rubbing your knives with abrasive products, hard cloths, and metallic or synthetic cleaners. If you use a dishwasher, place your knives in with the blades facing up and in separate containers from the rest of your cutlery to avoid scratching. Avoid leaving your knives submerged in water for long periods of time, especially in hard or salty water that can affect metals. Dry immediately with a soft cloth. Leaving your knives to dry in the dishwasher is not recommended. About Arcos Arcos is a leading Spanish knife manufacturer and one of the oldest knife and cutlery manufacturers in the world. In 1745, Don Juan de Arcos started hand-crafting the first knives and scissors marked with the Arcos brand, and many of these pieces are displayed in the National Museum of Archeology of Madrid. Gregorio Arcos Aroca turned the small hand-crafted workshop into a mass-production factory for professional knives in 1875. And a century later, Gregorio Arcos Villanueva started the international expansion of the company. Today, Arcos is still a family owned business and proud of its remarkable heritage. To learn more about the history of Arcos, see this larger timeline image. read more

ARCOS

Designed and engineered for heavy use, the Arcos 2900 line of kitchen knives is ideal for both professional settings as well as ho...me kitchens. Made in Spain using an exclusive Arcos stainless steel formula called Nitrum, the blade of this 10-inch chef's knife (250 mm) is enriched with nitrogen for hardening and added durability. And this knife features an NSF-certified, full colored handle in blue, which allows each knife to be identified for cutting a specific food. Full color handles idea for HACCP environments. In addition to being NSF approved, knives from the Arcos 2900 range are ideal for HACCP environments that require a color coding system to keep utensils used on meat, fish, and vegetables separated. Safe and comfortable, the handle is made from injected polypropylene (PP), with a seamless joint between handle and blade thanks to the injection process. The handle won't slip out of your hands, and it's also resistant to impact and high temperatures (up to 260 degrees F). Dishwasher safe, though hand washing is recommended. Arcos Nitrum Stainless Steel Nitrum is a nitrogen-enriched, stainless steel formula that's found exclusively in Arcos knives. With Nitrum stainless steel, your Arcos knife will possess improved hardness for a longer lasting sharpness, enhanced microstructure for higher resistance to corrosion, and exceptional edge durability for longer periods between re-sharpening. The Nitrum production process has no negative effect on the air, water, or soil. How to Correctly Sharpen Your Arcos Knife Arcos recommends the regular use of a sharpening steel to keep the cutting edge of your knife razor sharp. Place the blade of the knife on the steel at a 20 degree angle. Keep the arm that is holding the steel steady and swipe the blade lightly over the steel keeping the angle at 20 degrees. Give each side of the knife an equal number of swipes (about 20). Sharpen the other side of the blade as before, this time using the other side of the honing steel. And remember to always protect your fingers. See larger image. Tips For Use and Maintenance Wash knives immediately after use with a mild soap. Avoid prolonged contact with leftover food. Do not use bleach, soda or detergents containing chlorine or chlorides ions because they rust the steel and may cause it to lose its shine. Avoid rubbing your knives with abrasive products, hard cloths, and metallic or synthetic cleaners. If you use a dishwasher, place your knives in with the blades facing up and in separate containers from the rest of your cutlery to avoid scratching. Avoid leaving your knives submerged in water for long periods of time, especially in hard or salty water that can affect metals. Dry immediately with a soft cloth. Leaving your knives to dry in the dishwasher is not recommended. About Arcos Arcos is a leading Spanish knife manufacturer and one of the oldest knife and cutlery manufacturers in the world. In 1745, Don Juan de Arcos started hand-crafting the first knives and scissors marked with the Arcos brand, and many of these pieces are displayed in the National Museum of Archeology of Madrid. Gregorio Arcos Aroca turned the small hand-crafted workshop into a mass-production factory for professional knives in 1875. And a century later, Gregorio Arcos Villanueva started the international expansion of the company. Today, Arcos is still a family owned business and proud of its remarkable heritage. To learn more about the history of Arcos, see this larger timeline image. read more

ARCOS

Designed and engineered for heavy use, the Arcos 2900 line of kitchen knives is ideal for both professional settings as well as ho...me kitchens. Made in Spain using an exclusive Arcos stainless steel formula called Nitrum, the blade of this 8-inch chef's knife (200 mm) is enriched with nitrogen for hardening and added durability. And this knife features an NSF-certified, full colored handle in red, which allows each knife to be identified for cutting a specific food. Full color handles idea for HACCP environments. In addition to being NSF approved, knives from the Arcos 2900 range are ideal for HACCP environments that require a color coding system to keep utensils used on meat, fish, and vegetables separated. Safe and comfortable, the handle is made from injected polypropylene (PP), with a seamless joint between handle and blade thanks to the injection process. The handle won't slip out of your hands, and it's also resistant to impact and high temperatures (up to 260 degrees F). Dishwasher safe, though hand washing is recommended. Arcos Nitrum Stainless Steel Nitrum is a nitrogen-enriched stainless steel formula that's found exclusively in Arcos knives. With Nitrum stainless steel, your Arcos knife will possess improved hardness for a longer lasting sharpness, enhanced microstructure for higher resistance to corrosion, and exceptional edge durability for longer periods between re-sharpening. The Nitrum production process has no negative effect on the air, water, or soil. How to Correctly Sharpen Your Arcos Knife Arcos recommends the regular use of a sharpening steel to keep the cutting edge of your knife razor sharp. Place the blade of the knife on the steel at a 20 degree angle. Keep the arm that is holding the steel steady and swipe the blade lightly over the steel keeping the angle at 20 degrees. Give each side of the knife an equal number of swipes (about 20). Sharpen the other side of the blade as before, this time using the other side of the honing steel. And remember to always protect your fingers. See larger image. Tips For Use and Maintenance Wash knives immediately after use with a mild soap. Avoid prolonged contact with leftover food. Do not use bleach, soda or detergents containing chlorine or chlorides ions because they rust the steel and may cause it to lose its shine. Avoid rubbing your knives with abrasive products, hard cloths, and metallic or synthetic cleaners. If you use a dishwasher, place your knives in with the blades facing up and in separate containers from the rest of your cutlery to avoid scratching. Avoid leaving your knives submerged in water for long periods of time, especially in hard or salty water that can affect metals. Dry immediately with a soft cloth. Leaving your knives to dry in the dishwasher is not recommended. About Arcos Arcos is a leading Spanish knife manufacturer and one of the oldest knife and cutlery manufacturers in the world. In 1745, Don Juan de Arcos started hand-crafting the first knives and scissors marked with the Arcos brand, and many of these pieces are displayed in the National Museum of Archeology of Madrid. Gregorio Arcos Aroca turned the small hand-crafted workshop into a mass-production factory for professional knives in 1875. And a century later, Gregorio Arcos Villanueva started the international expansion of the company. Today, Arcos is still a family owned business and proud of its remarkable heritage. To learn more about the history of Arcos, see this larger timeline image. read more

ARCOS
$31.26
at Amazon

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 10-inch Chef knife wide blade blue colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

ARCOS

ARCOS leading European knife manufacturer, introduces 2900 series, unique professional NSF certified full colour handle range of k...nives 100-percent made in Spain since 1745. Specially designed for chopping, mincing, and dicing vegetables, meat and fish, the Arcos 2900 range 12-inch Chef knife wide blade blue colour handle uses an ergonomic handle made of polypropylene plastic (PP). This material is resistant to high temperatures and is non slippery. The 2900 provides different full colour handles which allows each knife to be identified for cutting a specific food, thus promoting better hygiene and health for the consumer. Blade made of hardened and tempered Nitrum stainless steel. Originally Arcos produced knives exclusively for the professional. Due to its high cutting power (over 100 mm) and long edge retention (over 350 mm) which made Arcos knives leader in the commercial market, now Arcos professional knives are also available for the end users that wants to feel in theirs hands a precise cutting tool used by professional chefs worldwide read more

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping