Ames True Temper True Temper 2046300 18-Inch Blacksmith Engineers Hammer Hickory Replacement Handle

The Blacksmith/Engineer's hammer features premium quality 18-inch hammer handle that is shock absorbent and durable. The hickory handle fits blacksmith/engineer's hammer heads ranging in weight from 6 to 8-pound. The hickory handle replacem...ent has excellent grip for handling comfort for the daily use in the field. Attach head to hickory handle to use effectively. read more

Ames True Temper
$33.58
at Amazon

Ames 1190600 4 Lb 36" Single Bit Dayton Axe With Hickory HandleAmes 1190600 4 Lb 36" Single Bit Dayton Axe With Hickory Handle Fea...tures: Used to trim branches, prune trees, split and cut wood Can also be used to drive wood stakes with the face Repair handle 2017300 (1340-3704) 4 lb head 36" hickory handle read more

Ames True Temper
$31.26
at Amazon

After years of fracturing concrete and carving through stones with your railroad/clay pick it is time that you replace your handle.... True Temper 36-inch fiberglass handle fits 5 to 7-pound sledges. The fiberglass handle provides the ultimate core handle for durability and safety. Slide the railroad/pick head onto handle from the bottom of the handle and tap head onto plastic handle guard until fitted tightly on handle guard. read more

Ames True Temper
$29.99
at Amazon

1196900 Size: 4 Lbs Features: -Sledgehammer. -Used for general sledging operations in striking wood, concrete, metal, and stone. ...-Common uses are drifting timbers and striking spikes, cold chisels, star drills, and hardened nails. -16'' handle length. -Available in 3lb and 4lb sizes. read more

Ames True Temper
$29.58
at Amazon

1197900 Size: 8 Lbs Features: -Sledgehammer.-Common uses are drifting timbers and striding spikes, cold chisels, star drills, and ...hardened nails.-Useful in drifting timbers and striking spikes, cold chisels, star drills, and hardened nails.-Repair handle 2000900 and 2017800. Options: -Available in 6Lb, 8Lb, 10 and 12Lb sizes. read more

Ames True Temper
$28.29
at Amazon

The premium quality 36-inch fiberglass axe handle has core ultimate strength. The handle is durable and comfortable to use while c...hopping wood. The single bit fiberglass handle fits axe heads ranging from 3-5-pound. Install the axe head to handle and use effectively. read more

Ames True Temper
$23.03
at Amazon

The Garden Pick/Cutter Mattock replacement handle features a 36-inch hickory handle fit for use of a 2-1/2-pound mattock head. The... American hickory replacement handle absorbs shock has an ergonomic hand grip. The Mattock head attaches to the replacement handle, it functions as a new tool and withstand constant-pounding from digging up roots, fracturing concrete, and breaking hardened soil read more

Ames True Temper
$19.99
at Amazon

Ames 1132600 5 Lb Wood Splitting Wedge SteelAmes 1132600 5 Lb Wood Splitting Wedge Steel Features: Used for splitting wood Steel 9...-1/4" length 1-3/4" head 5 lb wedge read more

Ames True Temper
$19.99
at Amazon

1197100 Features: -Handle Material:Metal -Handle Material:Wooden -Hammer Type:Dead Blow. Dimensions: -Overall Product Weight:4

Makita
$204.00
at Amazon

Makita's 18V Lithium-Ion Cordless Hammer Driver Drill has a built in L.E.D. light that helps illuminate darker work areas. A 1/2 i...nch keyless chuck for quick bit changes. 16 clutch settings a tool belt clip that can attaché to either side of the tool and an all metal 2 speed Transmission. (bare tool only) read more

Husqvarna
$1,599.00
at Amazon

Husqvarna power cutter with unique Cut-n-Break method cuts in stages of 2 1/2in. deep with 9in. twin diamond blades, leaving a thi...n core that is easily broken off with included breaking tool. Cutting can continue until required depth is reached, up to 16in. Excellent for indoor use, smaller jobs, flush cutting applications and when user wants to avoid overcutting at corners. Also ideal for cutting pipes in trenches, grooves for cabling, expansion joints and crack renovation. 120V motor has Elgard electronic overload protection and Electronic SoftStart to provide starting with normal, slow-acting fuses. Cutting Depth in. 16, Cutting Length in. 9, Amps 15, Volts 120. Cut-n-Break allows user to cut, in stages, up to 16in. deep Powerful 15 Amp, 1800 Watt 120V electric motor Adjustable blade guard enables flush cutting Ergonomic front handle makes it easy to cut vertically or horizontally Large miter gear delivers durability, minimal power loss and low noise levels read more

Panasonic
$637.00
at Amazon

Panasonic EYC18DV42- 18.V IP56 Li-ion 2pc "Impact Driver" Combo Kit. EYC18DV42 is a member of the Panasonic ToughIP Tool series an...d has passed the IP standard test administered by the International Electro technical Commission (IEC) receiving an IP56 rating, dust and water resistant. Panasonic's dust and water resistant technology has been demonstrated to comply with the IP standard by tests designed to gauge the level of protection against the intrusion of dust and water. The EYC18DV42 combo kit consists of EY74A1 Dual Voltage Drill Driver and EY75A1 Dual Voltage Impact Driver. The drill driver, EY74A1 delivers high power at any speed in a compact length- 8" lightweight - 4.3lbs frame. The drill has an 18-stage clutch plus drill position, 1/2-inch, heavy-duty keyless chuck, variable speed, 2-speed gear box, electric brake and quick-charging system and LED work light . The drill is ideal for general construction, plumbing, electric installation work and finish carpentry. The EY75A1X Impact Driver delivers high torque fastening, stays cool and comfortable. The EY75A1's 1,370 in.lbs power and 3 speeds make short work for tough jobs.. Its lightweight of 3.53lbs, compact style reduce fatigue, while its new brushless motor and electronic switch increase the motors lifespan by about twice as long as our conventional motor. The EYC18DV42 2pc Impact Driver Combo kit is powered by 4.2ah Lithium Nickel battery packs, highest capacity battery pack on the market.. This battery pack delivers high output with low heat generation resulting in longer run time. . In addition the 18V drill/driver and impact driver combo kit utilizes Panasonic's unique Guard ION system. The Guard ION system monitors each battery cell during battery charging and during tool use to prevent over discharging and overheating of the battery pack thus insuring long life. The kit consists of a drill/driver, impact driver, 2 - 4.2Ah Li-ion battery packs, charger and carry bag. read more

Makita
$1,330.00
at Amazon

This burly hammer has a powerful 11 Amp motor and spline drive system to power through the toughest jobs. Switches from rotary ham...mer to hammer-only mode. Air cushion design enables hard-hitting, fast drilling. Hammering Modes Hammering only, hammering w/rotation, Blows Per Minute BPM 2,100, Case Included Yes, Amps 11, Rated RPM 260, Cordless No. 11 Amp motor 260 RPM 2100 blows per minute Rotary Hammering and Hammering-Only modes Spline-type drive system for maximum power All ball and needle bearings for long tool life Large comfortable grip swivels 360 for easy handling Automatic brush cut-out system Air cushion design for hard hitting and fast drilling Torque limiter clutch for smoother operation Factory grease packed for reduced maintenance Includes straight handle, D-handle, depth gauge, bit grease and plastic tool case Model HR5000C read more

Williams
$277.02
at Amazon

All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for gre...ater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry read more

Forrest
$249.00
at Amazon

Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut e...dge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Recommended for: thin, low pressure, two-sided laminates, plywood & fine cross cutting on all woods. Eliminates need for a small scoring saw blade on table saw work. The 40° points slice through thin bottom layers with no tears or chips. Reduced yearly sharpening costs - less machine downtime.No splinters cross-cutting oak, ply veneers and melamineCuts in all directions- rip, cross-cut, miter, any depth.Cuts all sized grooves 1/4' through 29/32' increments. (Set of plastic adjusting shims also included)Super-hard carbide gives up to 300% longer life, especially good on plywoods and abrasive particle-boards. read more

Stanley Proto
$351.12
at Amazon

Stanley J6014C Proto 1/2-inch Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft-lbs Calibrated to +/- 3% clockwise directio...n and +/- 6% counter clockwise at 20% to 100% of full scale. Calibration is accomplished by manual loading the torque wrenches. Manufactured to meet standard industrial torque applications, general industry, heavy equipment and maintenance. read more

Stanley Proto
$268.21
at Amazon

Stanley J6062C Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 40-200 in-lbs Calibrated to +/- 3% clockwise directio...n (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

Stanley Proto
$265.03
at Amazon

Stanley J6060A Proto 1/4-inch Drive Ratcheting Head Micrometer Torque Wrench 10-50 in-lbs Calibrated to +/- 3% clockwise direction... (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance. read more

RIDGID
$806.75
at Amazon

632-74685 Features: -Cutters:Pipe Cutters -Multi-Use:No -Quantity:Single. Dimensions: -Overall Product Weight:28.63

View wishlist Set Sale Alert Continue shopping
View Sale Alerts Continue shopping