Make a personal statement in your bedroom retreat with a pretty headboard for the bed. These DIY headboard ideas will show you how to make a headboard from genius items such as wood shims, old shutters, and upholstered panels.
You'll be surprised by what home store staple serves as the foundation for this stylish headboard. Watch and find out, plus see how easy it is to make one for your bedroom.
Embrace two trends -- rope decor and industrial accents -- with this DIY headboard.
Watch and learn how to upholster a headboard. Our step-by-step how-to makes it easy. You can do this headboard in about a weekend, but grab a partner -- it's helpful to have an extra set of hands for some steps of this project.
Repurpose barn boards into a new headboard with a modern twist. Cut a piece of plywood to desired size (ours fits a queen bed). Gently clean the boards with a damp cloth, but don’t scrub or sand away the weathered character. Cut boards as needed, and nail them to cover the plywood. For the whitewashed finish, we diluted 1/3 cup white paint with 1/2 cup water and brushed on the mixture. When dry, we taped off boards and created color blocks using a blue spruce hue. The soothing shade works perfectly in a bedroom, and the color blocks add a modern touch to the piece. Screw the headboard into studs in your wall, or hang with wood cleats.
Look to carpet for more than just flooring purposes -- use it to fabricate a headboard. Cut a pattern from kraft paper in your desired size and shape. Trace the pattern onto plywood, and cut using a jigsaw. Sand, prime, and paint the edges of the plywood using semigloss latex paint, and let dry. Place carpet tiles on the plywood, allowing them to overhang all sides of the plywood. Use adhesive caulk to secure the carpet tiles one at a time to the plywood, and let dry. Use a sharp utility knife to cut the carpet tiles to the shape of the plywood. Use a rubber mallet to nail in large nailheads 1 inch from the edge and around the sides and top. Hang the headboard at the desired height using a cleat.
Tip: Place a second piece of clean, dry plywood or another heavy object on top of the carpet tiles to weigh them down as the adhesive dries. To care for the headboard, clean with a vacuum attachment to remove dust.
Update an old wood headboard with a fabric slipcover and a tension shower rod. It's a super-simple way to refresh a piece you may already have.
Paneled doors rescued from a salvage shop were repurposed into a handsome headboard. Another vintage find -- a plastic place mat -- created the stenciled design.
With crafts store supplies, you can make a DIY headboard that nods to a classic wrought-iron bed frame silhouette. Assemble two 36x48-inch frames from canvas stretchers. Positioned side by side, the frames will fit nicely behind a full-size bed. Paint frames and let dry. Cut two pieces of off-white linen, leaving enough material on all sides so it can be pulled tautly across the backs of the frames and stapled. Sketch half of the headboard design on each piece of linen with a pencil, and draw over the outline with a black king-size permanent marker. Lay the linen facedown on the backs of the corresponding frames. Use a staple gun to secure linen to frames. Staple the center top first; stretch the linen and staple at the bottom. Repeat for the sides. Continue stretching and stapling until linen is secure. Mount the framed canvas headboard on the wall with sawtooth hangers -- two per frame -- and secure with removable adhesive strips.
Thinking of skipping the headboard? You won't want to after watching this video. See all the things a headboard can do to enhance your bedroom.
With a little basic carpentry and a beautiful old quilt, you can create this charming headboard.
Look up for headboard materials: Use tin ceiling tiles. Cut a pattern from kraft paper in your desired size and shape. Trace the pattern onto plywood, and cut using a jigsaw. Place tin tiles on the plywood, allowing tiles to overhang. Use adhesive caulk to secure tiles one at a time to the plywood. Use tin snips to cut the tiles to the shape of the plywood. Grind down any rough edges. Paint the tin and sides, and let dry. Hang at desired height using a cleat.
Unlikely materials are often the ticket to eye-catching headboards. Here, corrugated metal roofing was fabricated into a headboard by cutting out the shape with a jigsaw. The edges were smoothed with a grinder before the piece was screwed to the wall. Plus, the headboard falls right in line with on-trend industrial decor.
Emblazoned with the mantra "relax," this headboard gives the invitation to do just that. To build this headboard, scout out old floorboards, barnwood, or other cast-off wood from architectural salvage shops or Craigslist. Check any paint on the wood for lead (testing kits are available at home centers). Remove nails and other sharp objects, and sand well.
Cut boards to desired size with a table saw. (Our boards are 60 inches long to fit a queen-size bed.) Sand the boards. Cut three 1x2s to 2 inches shorter than the height of your headboard (our headboard's total height is 40 inches, so our 1x2s are 38 inches); these are the headboard's back supports. Position salvaged boards with front sides down; place supports perpendicular to the boards. (Ideally, these supports will line up with the studs in your wall.) Screw the supports into the boards. To add the stenciled embellishment, arrange your letters on the headboard and trace around them with a marker. Use crafts paint (interior latex paint also works well) to fill in the letters, covering the lines. Screw the headboard into the studs in your wall, or screw heavy-duty hangers into the 1x2s to hang the headboard.
Break an oversize headboard into small squares for an easy upholstered headboard project. To make this headboard, cut plywood into enough squares to fit your space. Ours are 18-inch squares. Wrap the front of each square in quilt batting, stapling it to the back. Cut a square of fabric at least 2 inches wider on each side than the plywood square. Stretch the fabric over the batting, and staple it to the back of the plywood. Trim away excess fabric (especially at the corners) to make hanging easier. To hang, place a sawtooth picture hanger on the back of each panel, and arrange them on the wall above your bed.
For less than $100, you can make a headboard out of basics from your local home center. On a piece of medium-density fiberboard (MDF), draw a design that's as wide as the mattress and about 40 inches tall; cut it out. Use wood glue to cover the MDF with a piece of beaded board cut into the same shape. Glue strips of veneer over the rough edges. Glue or screw trim to the top edge and a finial in the cutout. Paint the entire piece. When dry, mount the headboard to the wall with 1-1/2-inch spacers.
Go beyond the basic headboard and make the entire wall behind your bed a headboard. Distressed barnwood planks run the length of the wall behind this bed. To create the look, measure your wall to determine what length of planks you'll need and how many it will take to cover the wall from top to bottom. Starting at the ceiling, secure the planks using nails at several points along the board, ensuring some of the nails are driven into studs. Continue down the wall, butting the top of the next board against the bottom of the previous board. You might need to cut a board horizontally when you get to the bottom. Including a regular upholstered headboard with the bed will add comfort to the wall.
This no-sew, no-tools-required update is an easy and affordable way to revive a metal headboard. Simply drape a length of fabric -- whether it's yardage, a woven floorcloth, or a blanket -- over an existing headboard. Clip both sides of the fabric together with curtain rings, and loop ribbon through the rings and around the bed frame, securing with a bow. Use several curtain rings on both sides of the headboard.
Instead of constructing a headboard, paint one on the wall behind your bed. To make this faux-bois headboard, you'll need a wood-graining tool -- a rubber roller that is engraved with a wood-grain pattern. Look for the tool in the paint section at a crafts store. Mask off the area where you'll be painting the headboard with painter's tape. Paint a base coat (we used a light blue); let dry. Mix 4 parts glaze medium with 1 part paint in a darker color. Apply the glaze mix using the wood-graining tool and following the manufacturer's instructions of rocking the tool back and forth as you pull it across the surface. Repeat until complete. Remove masking and let dry. Spray with a clear finishing sealer, if desired.
Trace a curvaceous pattern on a piece of medium-density fiberboard, and cut it out. Paint the edge white, and cover the front with wallpaper. The pattern will look striking against a blank wall, doubling as artwork in a bedroom. If using multiple pieces of wallpaper, take care to match the pattern for a chic, finished look.
Add a vintage country look to your bedroom with a feed sack-covered headboard. A large feed sack provides enough fabric to cover a twin-size headboard. Staple two layers of batting over the front side of a piece of plywood, then staple the feed sack on top of the batting. Pull the fabric taut as you add staples to the center of each side and then as you work your way to the corners. For a stunning finish, nail a piece of architectural salvage to the top of the upholstered headboard.
Create a one-of-a-kind headboard with built-in storage using old dresser drawers. Search salvage shops and secondhand stores for cast-off drawers and old dressers. Plan your layout on the floor, using fillers (such as storage cubes) and leaving spaces where the wall can show through. Once you've perfected your design, screw the pieces together. (We also cut plywood doors to fit a few openings and secured them with hinges.) To embellish your headboard, give it a few coats of paint and wallpaper the drawer backs and doors. Hang the headboard on the wall using a few 1x4-inch cleats.
With a bit of sewing skill, this high-end designer look-alike headboard can be created in a weekend. Check out our step-by-step instructions for creating this beautiful headboard.
Inexpensive picture frames can be found at garage sales or thrift shops and made into a magnificent headboard. Remove the glass from the frames, and cut quilt batting the same size as the frame back. Cut fabric to size, adding 2 inches on each side. Lay the fabric facedown, center the batting on the fabric, and add the frame back. Wrap the fabric and secure to the frame back with duct tape. Insert into the frame. Hang the frames side by side for a picture-perfect headboard.
A solid-pine door makes a perfect bold headboard. Cut 15 inches off the bottom of the door. Paint the door and let dry. Mount the door to the wall about 4 inches above the floor using two brackets. Reinforce with one bracket on top. To hide the top bracket, use finishing nails to attach a piece of molding to its top edge, 1 inch above the door. Fill holes with wood filler, sand, and paint.
Two single window panels are the perfect alternative to an ordinary headboard. To get this look, find windows that measure about the width of your mattress. Remove the glass and install fiberboard or thin plywood over the back for safety. Cut fabric to fit each section, and secure it in place with spray adhesive.
In place of a headboard, a salvaged mantel gives this bedroom architectural flair. The more distressed the better for a vintage look like this.