DIY Project: Install a Paver Patio

With the right materials and proper foundation, you can install a paver patio in a day.


  • view all thumbnails
step 1, remove shrubs
1/11
Clear the Area

    If necessary, remove shrubs along with stumps and roots. Excavate about 6 inches of soil to make room for base and pavers. Rake the ground level and tamp the soil to create a firm bed.

2/11
Weed Control

    Lay landscape fabric over the bed, cutting edges so the fabric fits in place. The porous material allows water to flow through but blocks weeds from sprouting.

3/11
Smooth Moves

    Spread a 2-inch layer of crushed gravel evenly over the landscape fabric. Use an iron rake to smooth the layer.

4/11
Tamp It Out

    Tamp the crushed gravel until base is extremely firm. This will help ensure that pavers settle evenly. Now add another 2 inches of gravel and tamp again.

5/11
On Level Ground

    Attach a level to a long, straight board, then move it across the bed to check how even the surface is. Adjust the contour of the bed as needed to make surface as level as possible.

6/11
Do a Little Shimmy

    Spread 1 1/2 to 2 inches of builder's sand over the gravel. Lay a long, straight board along the base of the house (see background). Take another board, notch both ends (see foreground) and shimmy it along the walk and the other board to smooth the sand.

7/11
Project Tip

    Mixing and matching different sizes of pavers (as shown in slide 10) can upgrade the look of your patio without costing a lot more money. Reduce costs by cutting some full-size pavers in half. Instead of renting a commercial-grade brick cutter (shown), which can be heavy and difficult to move, look for a compact brick cutter intended for smaller projects. Or see if you can pay the rental supply company to cut some pavers for you.

8/11
Walk the Line

    Lay the first paver. If the lines along the house and walk are not perfectly parallel, use a mason's line stretched tight between two stakes to keep lines true. Position pavers no more than 1/8 inch apart and tap them into place with a rubber mallet.

9/11
Finished Product

    After installation, spread a shallow layer of sand over the pavers and work the sand into the crevices with a push broom. Hose the area down to further settle the sand, filling any gaps that arise, then hose the area down a second time.

10/11
Patio Costs

    Concrete Pavers: $400
    Paver Delivery Fee: $50
    Gravel and Sand (bulk): $30
    Landscape Fabric: $10
    Brick-Cutter Rental: $60 (two hours at $30/hour)
    Total: $550

11/11
Popular Slideshows
If you're looking for ideas to spruce up your pati...

Paving creates an attractive, firm, and dry footin...

This weekend, take time to boost your home's curb ...

FULL YEAR just $5.99
Click Here!


Top Brands


Related Links
If you're looking for ideas to spruce up your pati...

Paving creates an attractive, firm, and dry footin...

This weekend, take time to boost your home's curb ...

Why spend big bucks on tools for your next paint t...

Share Your Thoughts