BHG.com  /   Home Improvement  /   Maintenance & Repairs  /   Plumbing

share

Replacing Sink Strainers

From Step-By-Step Plumbing

Prev  1 2 (of 2)  Next

About this Project

A slight leak under the sink at the tailpiece is likely the result of a poor seal between the strainer body and the sink. To check for this, plug the sink, fill the bowl, and look for drips. If water drips from where the strainer body joins the sink, disassemble the strainer and apply new putty. Leaks may also occur where the tailpiece joins the strainer body. If so, tighten the slip nut. If that does not solve the problem, replace the washer.


Continued on page 2:  Step-by-Step

 

Related Links

Applying Corner Bead: How to Apply Corner Bead

Applying Finishes to the Wood
This story includes tips for applying all finishes and tips specific to stain, penetrating oil, clear surface finishes and paint.

Applying an Epoxy Finish
This story shows how to apply an epoxy finish.



Comments

Comments ( 0 )
1871312868

Add your comment

Send to Facebook
 
 
  • Videos
  • Top Tools
  • Calendar
  • Win Daily
Built-In Ironing Board Cabinet
Danny Lipford: How to install a built-in ironing cabinet.

Removing Wallpaper
Danny Lipford: Tips to cover or remove wallpaper.

Tubular Skylight
Danny Lipford: Tubular sky light.

Neutral Bedroom

Decorating Inspiration

Thousands of gorgeous photos will inspire you to decorate your home this holiday season.

Get Inspired

All Top Tools

Todays Daily Prize
ADVERTISEMENT

 

 
Search Recipe Site
By using this site, you agree to our Terms of Service.