Holding and Measuring in Place
I Like This! (0)
Introduction
The most accurate and mistake-proof way of measuring is not to use a measuring device at all. Simply hold a piece where it needs to fit and mark it. You can do this for a simple cutoff. At other times, such as when you need to cut a board in two directions, use a combination of techniques: Hold and mark, then measure. Often this method isn't feasible, especially where access is limited or when the lumber being cut is too bulky to be held in place. But take advantage of this foolproof approach when you can.
Related Links
Related Videos
Comments
Comments ( 0 )2276971417
Add your comment
