Genius Bedroom Storage Ideas

See how you can pack more storage into your bedroom and closet and maximize organization.

View Video

Browse Backsplashes

Transform your kitchen with one of these stylish backsplash ideas.

View Slideshow

Find Your Dream Backyard

Whether you dream of sunning by a state-of-the-art pool or strolling through a simple cottage garden, there's an outdoor oasis with your name written all over it. Take this quiz to find out where you really belong.

See More

DIY Patio Ideas

Want to boost the beauty and usefulness of your outdoor spaces? Put one of these inspiring DIY patio ideas to work in your landscape.

View Slideshow

Update for $100

When it comes to DIY home projects, inexpensive does not have to equal inconsequential. For less than $100, you can create custom light fixtures, build accent walls, update your floors, or design one-of-a-kind decor. Budget home projects can make a big difference, as proven by this bunch of crafty bloggers.

View Slideshow

Add Exterior Charm

Is your home's exterior looking a little drab? These homes were too, until character-boosting updates completely transformed their dull facades. Take a cue from their makeovers and you too can refresh your exterior.

View Video

Budget Curb Appeal

Be the best home on the block for less. These budget curb appeal updates will show you how.

View Video
Popular in Home Improvement

How to Install Laminate Wood Floor

Set down a new floor in no time at all. Glueless laminate flooring is easy to install and can be walked on the same day.

Prefinished plank flooring is easier to install than hardwood flooring and offers the same appearance. The "planks" consist of medium-density fiberboard (MDF) sandwiched between plastic laminate.

How to Install Laminate Floors

  • The top laminate looks like random-grain wood, but its plastic composition makes it scratch- and stain-resistant.
  • Precision-milled tongue-and-groove edges make precise installation a snap.
  • The whole assembly is glued together at the edges and floats on a thin, closed-cell polyethylene foam pad.

Step 1: Acclimate the flooring. Flooring should sit in the room for at least 48 hours prior to installation, giving it time to expand or contract in relation to the room's temperature and humidity. This prevents buckling and other problems after installation.

Step 2: Remove existing baseboard molding. Use the pry bar to remove baseboard from the wall and set the pieces aside for reinstallation. Floating laminate planks (the kind used in this project) should be installed over a hard, smooth surface, such as vinyl. Remove damaged flooring to reveal the subfloor.

Step 3: Install the underlayment. Clear the floor of staples, nails, and other debris. Roll out the underlayment. Do not overlap adjoining strips. Use the utility knife to cut pieces as needed. The foam underlayment deadens sound and helps the floor feel more resilient.

Step 4: Plan the layout. To decide which direction to lay the planks, consider which wall is the longest and straightest. Avoid a narrow strip against the focal-point wall. Planks in the last row should be at least 2 inches wide. Figure on a 1/4-inch gap at each wall. Note it: If the last row will be less than 2 inches wide, add that width to the width of a full plank and divide by 2. Cut planks in the first and last rows to this width.

Step 5: Cut the first row. Depending on your layout, you may need to rip, or cut, the first row of planks lengthwise. If using a power saw, cut with the finished side down; if using a handsaw, cut with the finished side up. Use clamps to steady the planks as you cut them.

Step 6: Leave an expansion gap. Wedge the space chips that come with your installation kit between the wall and the planks to leave an expansion gap of 1/4 inch.

Step 7: Install the first row. Install the planks with the tongue side facing the wall (some manufacturers recommend you cut off the tongue edge of planks that face walls). Connect one plank to another by connecting the tongues and grooves. You may be able to snugly connect the planks by hand, or you may need to use a pull bar from the installation kit and a hammer to pull them together or a tapping block to tap the joints together. Cut the last plank in the row to length (save the scrap if it's at least 12 inches long).

Step 8: Install additional rows. As you snap on new rows, stagger the seams at least 12 inches in adjoining rows. You often can start a new row with the scrap from the plank you cut to end the previous row.

Step 9: Install the last row. You'll need to slide the planks into position at an angle, then gently pry them into place with the pry bar. Be sure you leave a 1/4-inch expansion gap between the last row and the wall.

Step 10: Cut around door casings. Don't try to cut planks to fit around door casings. Instead, use the jamb saw to cut the door casing about 1/16 inch above the height of the flooring, giving the plank room to slide under the casing. Rest a piece of flooring with underlayment on the floor and against the casing. Rest the jamb saw on top and cut the casing to the desired height.

Step 11. Reinstall the trim. After the planks are in place, reinstall the baseboard molding using the hammer and finishing nails. Then install shoe molding over the expansion joints and use transition strips to connect the laminate to adjoining surfaces, such as tile or carpet. Do not nail through the floor, just through the trim and wall.

close
close
close
close
close

Loading... Please wait...