We covered this three-drawer dresser with a twin-size sheet. When cutting out the fabric, check pattern matches and repeats so the overall design is pleasing. Flat-front drawers work best because the fabric is glued to the front, then wrapped around the edges and glued and stapled in place. For beveled drawers, apply the fabric to the flat surface only. Paint the bevel a contrasting color.

Cost: Less than $20 for a twin sheet

Time: An afternoon

Skill: Beginner

• 1 twin-size, flat sheet (for a three-drawer dresser)
• Scissors
• White crafts glue
• Paintbrush
• Small rolling pin or credit card
• Staple gun

1. Cut. Cut the sheet 1/2-inch wider on all sides than the drawer fronts.

2. Mix. Mix equal parts of water and white crafts glue, and paint one drawer front with the solution, covering the entire surface with a thin coat.

3. Glue. Working quickly, center the fabric on the drawer front and gently press it into place with a small rolling pin or the edge of a credit card. Work from the center out, pushing air bubbles out the sides.

4. Wrap and staple. Wrap the 1/2-inch fabric flaps to the drawer's sides or around to the back, and glue into place with full-strength glue. For extra security, add a row of hidden staples. Repeat this process for the rest of the drawers, then slide the drawers into a dresser that has been painted to match.