This simple, stylish messenger bag is just the right size to hold your keys and wallet for a quick trip to your favorite neighborhood coffeehouse.
7 1/2 X 8 1/4"
Quantities are for 44/45"-wide, 100% cotton fabrics. All measurements include a 1/4" seam allowance. Sew with right sides together unless otherwise stated.
To make the best use of your fabrics, cut pieces in the following order.
1. Referring to Diagram 1, cover the 9" batting square with the eight coordinating print 1 1/2 x 9" strips, overlapping strip edges by about 3/8". Topstitch through all layers along each strip raw edge to make flap front.
2. Cover raw edges where strips overlap with 10" lengths of ribbon, yarn, rickrack, or other trim; machine-stitch in place. (See "Choosing the Right Stitch" for details on attaching trims.)
3. Hand-stitch any small beads or charms as desired, placing them at least 1" away from the flap front raw edges. (Attaching these small embellishments now ensures that most knots will be hidden inside the finished flap.)
4. Trim flap front to 8 1/2" square. With right sides together, sew the flap front and the green print 8 1/2" square on all sides, leaving an opening for turning in the center of the top edge (Diagram 2). Turn right side out and press, turning under raw edges. Topstitch 1/8" from all edges to complete the flap.
1. Following the manufacturer's instructions, press the fusible fleece 8 x 9 1/2" rectangles onto backs of the red print 8 x 9 1/2" rectangles; let cool. Sew together red print rectangles along both 9 1/2"-long edges (the sides) and one 8" edge (the bottom) to make the bag body (Diagram 3). Press seams open.
2. To box a bottom corner of the bag body, match the bottom seam and side seam; stitch across the resulting triangle 1" from the point (Diagram 4). Trim the seam allowance to 1/4". Repeat to box the remaining bottom corner. Turn bag body right side out.
3. Join green print rectangles along 10 1/2"-long edges (the sides) and one 8" edge (the bottom) to make the bag lining. Press seams open.
4. Repeat Step 2 to box the bottom corners of the bag lining. Do not turn bag lining right side out.
1. Cut and piece red print 2 x 42" strips to make 1 -- 2 x 49" handle strip
2. Press under 1/4" along each long edge of the red print handle strip. Insert the batting 3/4 x 48" strip under one fold; batting strip should end 1/2" from handle strip ends. Fold the handle strip in half along the batting edge and topstitch 1/8" from folded edges to make the handle (Diagram 7).
To couch yarn or small cording, zigzag over it with clear monofilament thread. Sew wide ribbons in place with a straight stitch along both edges or a wide zigzag stitch. Attach rickrack and other narrow trims with a straight stitch down the center. If beaded trim has a decorative header (like this purse trim's satin ribbon), you don't have to hide it in a seam; straight-stitch in place instead.