Popular in Jewelry Projects

Beaded Toe Rings

With all these rings to choose from, fashion a toe ring to coordinate with any outfit.

Oops, we're sorry. Something went wrong. Please try again later.
Oops, we're sorry. Something went wrong. Please try again later.

What You Need:

Feeling playful or playful? Create rings to match your moods.
  • Piece of clear elastic cord
  • Approximately 30 black glass seed beads
  • 1 rose crystal bead
  • Strong glue, such as E6000
  • Toothpick
continue reading below

Instructions:

1. Thread enough seed beads on elastic to fit around the top section of your toe.

2. Slide on the crystal bead.

3. Make a square knot by folding the elastic right over left and left over right.

4. Dab the end with a small touch of glue using a toothpick. Trim off the excess elastic and hide the knot in a bead.

What You Need:

  • 3/4-inch sterling silver endless hoop earring
  • 3 sterling silver crimp beads; crimping tool
  • 2 large blue-green seed beads
  • 2 large blue seed beads
  • 1--4 mm sterling silver round bead

Instructions:

1. Open earring slightly. Add one crimp bead on the thin part of the hoop.

2. Thread on a blue-green seed bead, a blue seed bead, the silver bead, and a crimp bead; flatten the crimp bead.

3. Thread on a blue seed bead, a blue-green seed bead, and a crimp bead; flatten.

What You Need:

  • 3/4-inch sterling silver endless hoop earring
  • 2 sterling silver crimp beads; crimping tool
  • 1 sterling silver 2-inch headpin
  • 1--6 mm hemalyke (synthetic hematite) bead
  • Needle-nose pliers

Instructions:

1. Open earring slightly. Add one crimp bead on the thin part of the hoop.

2. Place hemalyke bead on the headpin. Using needle-nose pliers, make a right angle about 1/4 inch above the bead. Cut off the headpin, leaving 1 inch. Use pliers to make a small loop about 1/8 inch above the bead and wrap the wire around the headpin; trim off excess.

3. Slip the hemalyke bead on the thin part of the loop. Add a crimp bead and flatten. Close the earring.

What You Need:

  • 4--3 mm glass or semiprecious stone beads
  • 6-inch piece of 20-gauge sterling silver wire
  • 2/3-inch wood dowel
  • Needle-nose pliers
  • Strong glue, such as E6000

Instructions:

1. Position one stone on the end of the wire. Using needle-nose pliers, pinch the tip of the wire and turn one full circle.

2. Using a 2/3-inch wood dowel or tube, bend the wire 2 1/2 times around the dowel.

3. Slide on two beads, placing a bead on each wire.

4. Take the other end of the wire and repeat Step 1. Make two full twists for a more decorative end.

5. Using a toothpick, dab a small dot of glue directly on the decorative end. Slide a bead onto the glue.

6. Repeat the gluing process with the other two beads, staggering the distance between the beads. Let the glue dry.

What You Need:

  • 1--3/4-inch sterling silver endless hoop earring
  • 2--3 mm round sterling silver bead
  • 1--4 mm round sterling silver bead
  • 2 sterling silver crimp beads
  • Crimping tool

Instructions

1. Open earring slightly.

2. Slide a crimp on the narrow wire and flatten. Thread on one 3 mm bead, the 4 mm bead, a 3 mm bead, and the crimp bead.

3. Close earring and flatten the crimp bead.

Oops, we're sorry. Something went wrong. Please try again later.
Oops, we're sorry. Something went wrong. Please try again later.

More Jewelry Projects

close
close
close
close
close

Loading... Please wait...

I Did It!
Share on Facebook
Uh oh! Please pick a jpg at least 600x600px. Done close
Choose Cancel close
Share on Facebook
Uh oh! Your photo failed to upload. Please try again or visit your profile.
Done Cancel close
No one has shared their photo yet.
close