Popular in Christmas Cards & Tags

Ornament Card

Topped with ornament caps and wire hangers, these tree-trimming tributes are close to the real thing.

Oops, we're sorry. Something went wrong. Please try again later.
Oops, we're sorry. Something went wrong. Please try again later.

What You'll Need:

Dress up circles to resemble tree trims.
  • 1 sheet of metallic card stock, choice of color
  • 1 sheet of metallic silver card stock
  • Metallic silver paper
  • Glitter, 1-2 colors
  • 6-inch piece of wire
  • Circle cutter and mat
  • Wire cutter
  • Scissors
  • Nail polish remover and soft cloth, optional
  • Glue stick
  • Peel-and-stick double-sided tape (must have the peeling)
  • Envelope or vellum and tracing paper
continue reading below

Instructions:

1. Download the free pattern for this project. (Downloading requires Adobe Acrobat software.)

Ornament Cap pattern

Assorted Envelopes Pattern

Download Adobe Acrobat

2. Cut a 4-inch circle from metallic card stock.

3. Trace the patterns on tracing paper; cut out. Trace around ornament cap twice on silver paper; cut out.

4. Cut a 5 x 2-inch rectangle from silver card stock. Cover the back of the rectangle with double-sided tape, then cut three curvy lines.

5. Wrap wire around something round, such as a large marking pen, at least twice to form the hanger; cut wire piece to include a complete circle.

6. Tape one ornament cap to front of ornament. With ornament face down, put glue on ornament cap and attach wire ring. Align and glue second cap with front cap.

7. For ornament with curves, peel off paper and apply them to the front of ornament, leaving spaces in between to let the metallic background show through. Trim the outer edges of the wavy strips even with the round ornament.

8. Fill in spaces with glue; sprinkle glitter on the glue, shaking off any excess. Let dry. If you get glue or adhesive on the ornament, wipe it clean with nail polish remover and a soft cloth.

What You'll Need:

This snowy night will bring peaceful wishes to your friends and family.
  • 1 sheet of blue metallic card stock
  • 1 sheet of green metallic card stock
  • Metallic silver paper
  • 1 sheet vellum
  • Metallic marking pens in silver and copper, such as Krylon or Painty Pen
  • 6-inch length of wire
  • Circle cutter and mat
  • Scissors
  • Wire cutter
  • Nail polish remover and soft cloth, optional
  • Spray adhesive
  • Glue stick
  • Envelope or vellum and tracing paper

Instructions:

1. Download the free pattern for this project. (Downloading requires Adobe Acrobat software.)

Cap and Snowy Night pattern

Assorted Envelopes Pattern

Download Adobe Acrobat

2. Cut a 4-inch circle from blue metallic card stock.

3. Trace the patterns, on tracing paper; cut out. Trace around snow patterns on vellum; cut out two rolling snowy hills. Apply to blue circle with spray adhesive, overlapping as shown.

4. Cut out elongated triangles from green metallic card stock; glue to ornament. With a silver pen, dot snowflakes and star. With copper pen, make tree trunks.

5. Using ornament cap pattern, cut two ornament caps from silver paper.

6. Wrap wire around something round, such as a large marker, at least twice to form the hanger; cut wire piece to include a complete circle.

7. Tape one ornament cap to front of ornament. With ornament face down, put glue on ornament cap and attach the wire ring. Align and glue the second cap with the front cap. If you get glue or adhesive on the ornament, wipe it clean with nail polish remover and a soft cloth.

Oops, we're sorry. Something went wrong. Please try again later.
Oops, we're sorry. Something went wrong. Please try again later.

More Christmas Cards & Tags

close
close
close
close
close

Loading... Please wait...

I Did It!
Share on Facebook
Uh oh! Please pick a jpg at least 600x600px. Done close
Choose Cancel close
Share on Facebook
Uh oh! Your photo failed to upload. Please try again or visit your profile.
Done Cancel close
No one has shared their photo yet.
close