Photo Canvas DIY: 2 Ways
Do you love photo canvases, but don’t really have the budget to buy them? Well today I’m going to share 2 ways you can make these neat creations without breaking the bank. The first way we’ll use iron-on transfer paper to transfer an image to fabric, then print onto tissue paper and Mod Podge the image! Trust me, it’s easy. They are great gifts, or just keep them for yourself to decorate your home.
Iron-on Fabric Photo Canvas DIY
- 8 x 8 canvas
- 1/2 yard of white fabric
- fabric iron-on paper
- high quality photo
- staple gun and staples
- Let’s start with printing our photo onto the iron-on transfer paper. Set up your photo on your computer. Flip it horizontal so the image is “backwards”. The image will iron-on the correct way when transferred to fabric. Note: if you don’t have a printer, you can take an image to a local print shop. I’ve brought my iron-on transfer paper to a local printer in the past and they printed on it for me. Just call them and ask. You can also ask them to flip the image for you, if you’re not sure how.
- Iron-on the image onto the fabric (following your iron-on transfer paper instructions). Let cool and peel back paper. Trim the fabric to an 11 x 11 square.
- Center the image on the front of the canvas. Carefully flip over and staple the fabric onto the back of the frame. Fold fabric corners on the top and bottom of the frame. Note: if you mess up and the image isn’t even over the canvas, just pull out a staples and start over.
- You are done! The cool thing about this project is you can use an old canvas frame. Have a painting you don’t like anymore? You can just staple this fabric over the painting. Just pull the fabric off if you get tired of the image.
Total cost: under $15
Mod Podge Tissue Photo Canvas Diy
- 8 x 8 canvas
- 8.5 x 11 printer paper
- 8 x 8 image
- white tissue paper
- painters tape
- acrylic sealer spray
- Mod Podge
- white acrylic paint
- Let’s prep the picture. Carefully smooth out and tape the white tissue paper onto the printer paper (you’re printing onto the tissue paper). Put it into the printer and print your 8 x 8 image. Let the printed image dry completely. Note: while taping the tissue paper onto the printer paper, make sure the tissue is very smooth. If it’s too wrinkly it will print weird.
- In a well ventilated area wearing a mask and eye protection, spay a very light layer of acrylic sealer spray onto the printed tissue image. Let dry for an hour. Carefully remove the printed tissue paper from the printer paper. Trim the sides of the tissue paper (leave a 1/4 inch border around the image).
- Grab your canvas and apply a very light layer of Mod Podge. Very carefully place the printed tissue image onto the mod podged canvas. Carefully smooth out the image from the center out. Apply one more coat of Mod Podge over the tissue image to seal the picture. Let dry for a couple of hours.
- Use the white acrylic paint to cover the side of the canvas (to cover any excess tissue that folded over the side). Apply 2 – 3 coats of the paint.
- When the paint is dry, you’re done!
Total cost: around $10
I hope you enjoy! Let me know how this Photo Canvas creating goes!
- Chelsey, The Paper Mama
One Response to “ Photo Canvas DIY: 2 Ways ”